Variability in energy partitioning and resistance parameters for a vineyard in northwest China

Grapevines are extensively grown in the semiarid and arid regions, but little information is available on the variability of energy partitioning and resistance parameters for the vineyard. To address this question, an eddy covariance system was applied to measure energy balance over a vineyard in northwest China during 2005-2006. Result indicated that 2-year average Bowen ratio (β) of vineyard was 1.0, canopy resistance (r_c) 289.3 s m⁻¹, aerodynamic resistance (r_a) 9.7 s m⁻¹ and climatological resistance (r_i) 117 s m⁻¹. This implied that the annual energy was split almost equally between sensible heat and latent heat. Compared to the corresponding values in other ecosystems reported by Wilson et al. [Wilson, K.B., Baldocchi, D.D., Aubinet, M., Berbigier, P., Bernhofer, C., Dolman, H., Falge, E., Field, C., Goldstein, A., Granier, A., Grelle, A., Halldor, T., Hollinger, D., Katul, G., Law, B.E., Lindroth, A., Meyers, T., Moncrieff, J., Monson, R., Oechel, W., Tenhunen, J., Valentini, R., Verma, S., Vesala, T., Wofsy, S., 2002. Energy partitioning between latent and sensible heat flux during the warm season at FLUXNET sites. Water Resource Research 38, 1294-1305.], the vineyard had a higher β, r_c and r_i than deciduous forests, corn and soybean, and grassland. Such difference was mainly attributed to (1) serious water stress in 2005, which resulted in a greater r_c up to 364.4 s m⁻¹; (2) sparse canopy with row spacing of 2.9 m and plant spacing of 1.8 m; (3) warm-dry climate and high attitude (1581 m) along with higher r_i and lower psychrometer (54 Pa K⁻¹) in the arid region of northwest China. These characters of vineyard revealed varying process of energy partitioning and surface resistance, and provided a scientific basis in understanding and modeling water and energy balance for the vineyard in the semiarid and arid regions.     

Relationship between stable carbon isotope discrimination and water use efficiency under regulated deficit irrigation of pear-jujube tree

To investigate the relationship between stable carbon isotope discrimination (Δ) of different organs and water use efficiency (WUE) under different water deficit levels, severe, moderate and low water deficit levels were treated at bud burst to leafing, flowering to fruit set, fruit growth and fruit maturation stages of field grown pear-jujube tree, and leaf stable carbon isotope discrimination (Δ_L) at different growth stages and fruit stable carbon isotope discrimination (Δ_F) at fruit maturation stage were measured. The results indicated that water deficit had significant effect on Δ_L at different growth stages and Δ_F at fruit maturation stage. As compared with full irrigation, the average Δ_L at different growth stages and Δ_F at fruit maturation stage were decreased by 1.23% and 2.67% for different water deficit levels, respectively. Δ_L and Δ_F among different water deficit treatments had significant difference at the same growth stage (P < 0.05). Under different water deficit conditions, significant relationships between the Δ_L and WUE_i (photosynthesis rate/transpiration rate, P_n/T_r), WUE_n (photosynthesis rate/stomatal conductance of CO_2, P_n/g_s), WUE_y (yield/crop water consumption, Y/ET_c) and yield, or between the Δ_F and WUE_y and yield were found, respectively. There were significantly negative correlations of Δ_L with WUE_i, WUE_n, WUE_y and yield (P < 0.01) at the fruit maturation stage, or Δ_L with WUE_i and WUE_n (P < 0.01) over whole growth stage, respectively. Δ_F was negatively correlated with WUE_y, WUE_n and yield (P < 0.05), but positively correlated with ET_c (P < 0.01) over the whole growth stage. Thus Δ_L or Δ_F can compare WUE_n and WUE_y, so the stable carbon isotope discrimination method can be applied to evaluate the water use efficiency of pear-jujube tree under the regulated deficit irrigation.     

金属板材数控渐进成形螺旋线轨迹生成

在分析金属板材数控渐进成形特点的基础上,指出现行等高线运动成形方式存在的问题,提出了一种基于螺旋运动的数控渐进成形方式和基于STL数据模型的螺旋线成形加工轨迹的生成算法。利用顶点偏置方法生成STL模型的等距模型,采用一系列水平面和与Z轴平行的平面分别切割该等距模型,求出其交线的交点,并将其连接成螺旋线成形加工轨迹。算法应用实例表明,该算法能够生成无干涉的螺旋线成形加工轨迹。     

提辊式拔棉秆阻力分析

机械化拔棉秆对提高农业生产效率有重要意义.以提辊式拔棉秆机械的工作部件为研究对象,并对提辊建立数学模型,分析其受力和各项功耗,得出各项阻力在总阻力中所占的比例关系;根据各参数与总阻力之间的数学关系建立函数图像,分析得出影响牵引阻力的主要参数与阻力之间的关系;结合试验,进一步得到提辊参数间的优化组合,为提辊式拔棉秆机械的进一步优化设计提供参考.     

直线共轭内啮合齿轮泵齿轮接触强度的有限元分析

针对采用传统经验公式分析计算齿轮泵齿轮接触强度存在计算过程相当复杂、繁琐,误差较大的问题.在分析齿轮受力情况基础上,采用有限元法对直线共轭内啮合齿轮泵齿轮接触强度进行计算,并与经验公式计算的接触强度进行比较分析.结果表明,两种方法计算结果基本吻合,证实了采用有限元法分析计算的可行性与优越性,为直线共轭内啮合齿轮泵齿轮的设计、选材提供了一种新的方法,具有一定的工程应用价值.     

压电共振型隔膜气泵设计

提出了一种利用系统共振原理的压电共振型隔膜气泵.分析了共振泵的工作原理,建立了共振泵的动力学模型,通过计算获得影响共振泵输出流量的主要因素.设计了共振泵样机,使用激光测微仪测得隔膜片的放大位移约是同一支撑条件下的压电振子位移的5.3倍,设计了测量共振泵输出流量的实验装置.通过实验测试得到在不同的振动弹簧刚度、调整弹簧片刚度和隔膜片刚度下输出流量及其相应的变化规律.实验测试表明:在输入电压为150 V、振动弹簧片厚度为0.6 mm、调整弹簧片厚度为1.4 mm、刚性传振活塞与隔膜片半径比为0.5和共振频率为230 Hz时,输出流量可以达到1 650 mL/min.     

酶—湿热处理对锥栗淀粉理化特性的影响

采用酶-湿热处理锥栗淀粉,研究酶用量与脱支时间对复合变性锥栗淀粉理化特性的影响。结果表明:酶-湿热处理锥栗淀粉的晶型均为A型,且预期血糖指数(p GI值)大多低于55%,属于低p GI值食品。由体外消化动力学分析、扫描电子显微镜、X-射线衍射、差示扫描量热、高效阴离子色谱-脉冲安培检测等实验分析得出,酶-湿热处理锥栗淀粉的抗性淀粉含量、分子链平均聚合度(DP值)、相对结晶度和熔融焓等随酶用量和脱支时间的变化表现为3个阶段,尤其在第2阶段,即当酶用量在50~60 U/g且反应时间在12~16 h范围内时,因分子链DP值适合重新聚合形成稳定的结晶结构,抗性淀粉含量、相对结晶度和熔融焓均达到最大。     

金银花多酚氧化酶特异性与抑制剂动力学研究

对金银花多酚氧化酶底物特异性和不同抑制剂的抑制效应进行了动力学分析,结果表明:金银花多酚氧化酶的最适作用底物为绿原酸,Km值为0.0059 mmol/L。维生素C、4-己基间苯二酚、L-半胱氨酸对多酚氧化酶的抑制均属可逆抑制,其抑制类型分别属于混合性、竞争性、反竞争性,对游离酶的抑制常数KI分别为1.620、4.587、0 mmol/L,对酶-底物络合物的抑制常数KIS分别为1.995、0、3.780 mmol/L;柠檬酸的抑制效应属不可逆抑制。维生素C、4-己基间苯二酚、L-半胱氨酸、柠檬酸对金银花多酚氧化酶半抑制浓度分别为0.062、0.053、0.140、0.048 mmol/L。     

小型割前脱粒收获机双滚筒恒速控制研究

对一种小型割前脱粒收获机双滚筒恒速控制问题进行了研究。建立了行走速度与滚筒角速度的数学模型,确定了在作物密度不可控的情况下,可以通过控制行走速度来稳定滚筒角速度。进行基本试验得到了收获机在额定工作时的喂入量和滚筒转速范围,以此作为恒速控制的基准值。在实际工作过程中,滚筒转速传感器实时检测滚筒转速反馈给控制器,控制器通过控制步进电机调节变量泵排量来控制收获机减速或加速,从而稳定滚筒转速。试验结果表明:该控制系统提高了割前脱粒收割机双滚筒工作转速的稳定性,减轻了操作者的劳动强度。     

双辊秸秆还田旋耕机试验

阐述了粉碎刀辊正转、旋耕刀辊反转的双辊秸秆还田机结构特点和作业机理.基于土槽试验台设计了室内旋耕耕作部件试验装置.室内试验结果表明,双辊作业模式具有良好的植被性能和相对较低功耗,其应用于双辊秸秆还田旋耕机是可行的.研制了双辊秸秆还田旋耕机并进行了玉米秸秆还田性能试验,试验结果表明双辊秸秆还田旋耕机可一次完成直立玉米秸秆还田、旋耕碎土等联合作业,秸秆粉碎合格率、根茬破碎率、植被覆盖率、碎土率等可达90％以上.