Environmental Regulation and Irrigation Management Transfer: California's Central Valley

This paper highlights the importance ofregulation in irrigation system operationand maintenance and illuminates thedramatic on-going evolution of watermanagement institutions in California'sCentral Valley. The paper does so bylooking at irrigation as a set of servicesexchanged among various actors and regardsregulation as one of several mechanismsthat govern the interaction between theseactors. Regulation has not yet become acentral topic in the global irrigationdebate. The study highlights the influenceregulation, as an external governancemechanism, can have on theinterrelationships among the actorsinvolved in irrigation service delivery.     

Irrigation and Drainage Systems Maintenance: Needs for Research and Action

Irrigation system maintenance hastraditionally played second chair to systemoperations. This relative neglect hassquandered economic benefits and depletedthe value of capital assets. Recentprograms transferring operation andmaintenance responsibility to water usergroups offer an opportunity to redress thisbalance and create a more systematic andsustainable program of system maintenancein transferred systems. This paperidentifies important research needs thatform the basis for an action researchintervention program. The need to linkmaintenance inputs to hydraulic performance isclearly important, as is the need toprioritize inputs in terms of both cost andexpected impact on performance. Thefunding of maintenance is closely linked toasset management so that water user groupscan develop long-term strategies forprioritizing and financing theiractivities. Factors that lead water usergroups to choose between a self-helpstrategy towards O&M and the hiring ofprofessional staff to undertake these tasksalso requires additional research andinvestigation. Finally, the relationshipbetween regular maintenance and frequentrehabilitation needs to be defined and thetwo linked through policy, agreements, andfunding arrangements.     

Optimal Maintenance in Irrigation

This article asks and addresses thequestion ``what is `optimal' maintenance inirrigation.' It examines alternativedefinitions of irrigation maintenance andexplores pathways of system deteriorationunder alternative input levels. It thendefines maintenance as a service, where thefunctions of arranging, providing, payingfor, and using the service are considered,and discusses the arrangements andrelationships necessary to provide thisservice. Key to this approach is theconcept of maintaining a specified level ofservice – a concept drawn from the assetmanagement approach to systems maintenance. A contingency matrix is developed whichdefines basic maintenance strategies underdifferent levels of cost and risk. Thepaper concludes that optimality ofirrigation system maintenance is somethingwhich cannot be defined on technicalgrounds, or economic ones, or even oninstitutional grounds alone. Rather it mustbe defined as a process operating within aset of framework conditions and technical,economic and institutional constraints.     

The Melting Curve of Iron to 250 Gigapascals: A Constraint on the Temperature at Earth's Center

The melting curve of iron, the primary constituent of Earth's core, has been measured to pressures of 250 gigapascals with a combination of static and dynamic techniques. The melting temperature of iron at the pressure of the core-mantle boundary (136 gigapascals) is 4800 +/- 200 K. whereas at the inner core-outer core boundary (330 gigapascals), it is 7600 +/- 500 K. Corrected for melting point depression resulting from the presence of impurities, a melting temperature for iron-rich alloy of 6600 K at the inner core-outer core boundary and a maximum temperature of 6900 K at Earth's center are inferred. This latter value is the first experimental upper bound on the temperature at Earth's center, and these results imply that the temperature of the lower mantle is significantly less than that of the outer core.     

A framework for assessing irrigation performance

A comprehensive framework for conceptualizing irrigation performance is presented which, by clarifying relationships among the many incommensurate approaches to performance assessments, can provide the basis for more systematic comparative assessments of irrigation. Irrigation systems are carefully defined, and their relationships to broader agricultural and socioeconomic systems specified in terms both of goals and of inputs and outputs. Goals are seen as crucial to performance assessments, and the existence of many sometimes conflicting goals requires both specification of whose goals are being considered and clarification as to whether the goals are related to inputs, to outputs or to efficiency. Assessments can be categorized according to their purpose, with significant differences among those that monitor operational performance, those that facilitate interventions to improve performance, and those that promote accountability within an operating agency. Assessments also differ in the types of performance measures used. Three distinct categories of performance measures are identified: process measures, which relate to a system's internal operations; output measures, which focus on a system's final output; and impact measures, which pertain to the effects that the system's outputs induce in its larger environment. Performance measures are distinguished from performance standards which may be established from a variety of sources.Earlier versions of this paper were presented at the Symposium on Performance Evaluation of Irrigation systems held at the International Irrigation Management Institute, Colombo, Sri Lanka on November 23, 1989, and at a Workshop on Irrigation Performance held in Pangbourne, England, February 15–16, 1990.     

Canopy-air temperature of crops grown under different irrigation regimes in a temperate humid climate

Summary Canopy temperatures of wheat, barley, rape and perennial rye grass crops, grown under temperate humid climatic conditions at different irrigation regimes were measured during two growing seasons, 1986 and 1987, by determining the emission of radiation in the wavelength interval 8<<14 m. Global radiation, net radiation, air temperature, relative humidity and wind speed were measured simultaneously. The canopy temperature of the crops either fully irrigated or under water stress fluctuated up to 6 °C within a few minutes in response to rapid changes in global radiation. At high level of global radiation (800–1000 W m^–2) canopy-air temperature differences up to 8 °C were measured whereas at low level of global radiation (100–200 W m^–2) canopy-air temperature differences were found to approach zero or become negative even at severe crop water stress. Canopy temperature differences between water stressed and fully irrigated crops up to 6 °C were measured under conditions of high evaporative demand whereas under conditions of low evaporative demand canopy temperature differences between water stressed and fully irrigated crops approached zero even at severe crop water stress. For each crop the lower base line, i.e. the relationship between canopy-air temperature difference and vapor pressure deficit for a fully irrigated crop, was estimated by linear regression. In most cases a poor correlation was obtained which is attributed to considerable temporal variability in global radiation and wind speed and to the narrow range of prevailing values of vapor pressure deficit. However, from the base line for rape and barley it was possible to calculate apparent values of the aerodynamic resistance and the crop resistance which were of the same order of magnitude as those found for other crops by using this method under more arid climatic conditions.     

Ice-edge eddies in the fram strait marginal ice zone

Five prominent ice-edge eddies in Fram Strait on the scale of 30 to 40 kilometers were observed over deep water within 77 degrees N to 79 degrees N and 5 degrees W to 3 degrees E. The use of remote sensing, a satellite-tracked buoy, and in situ oceanographic measurements showed the presence of eddies with orbital speeds of 30 to 40 centimeters per second and lifetimes of at least 20 days. Ice ablation measurements made within one of these ice-ocean eddies indicated that melting, which proceeded at rates of 20 to 40 centimeters per day, is an important process in determining the ice-edge position. These studies give new insight on the formation, propagation, and dissipation of ice-edge eddies.     

Effects of Glucose Concentration on in vitro Fertilization in BALB/c Mice

BALB/c mice are widely used in genetic, tumour and immunological studies. However, the mice demonstrate a lower reproduction rate, low fertility and small litters, because of their highly genetic homozygoisty. Based on in vitro fertilization (IVF), a routine technique for biomedical studies, it is worth to evaluate the effects to BALB/c mice on IVF efficiency. In order to test the genetic factor affecting the IVF efficiency of BALB/c, four reciprocal IVF tests of BALB/cByJ and FVB/NCrl mice were performed. The results showed that the average fertility of IVF sponsored by FVB/NCrl spermatozoa was 69.6%, but only 12.1% was obtained from BALB/cByJ strain. Effect of glucose contained in the culture medium to the IVF efficiency of BALB/cByJ was also evaluated. The results showed that the fertility of BALB/cByJ spermatozoa incubated with 0, 2.7, 5.5, 11.1 and 22.2 mm of glucose in the TYH medium were 6.8, 9.9, 13.9, 32.7 and 22.2%, respectively. It is showed that IVF efficiency of BALB/cByJ spermatozoa could be improved depending on the concentration of glucose in the IVF medium. According to the results, it is beleived that lower IVF of BALB/cByJ mice might be due to the genetic defect in spermatozoa and increasing glucose in the IVF medium which significantly affect the IVF efficiency of BALB/cByl via activating the spermatozoa.     

Monitoring infection with Piscine myocarditis virus and development of cardiomyopathy syndrome in farmed Atlantic salmon (Salmo salar L.) in Norway

An epidemiological study was carried out in Norway in 2015–2018, investigating the development of infection with Piscine myocarditis virus (PMCV) and development of cardiomyopathy syndrome (CMS) in farmed Atlantic salmon. Cohorts from 12 sites were followed and sampled every month or every other month from sea transfer to slaughter. PMCV was detected at all sites and in all sampled cages, and fish in six sites developed clinical CMS. The initial infection happened between 1 and 7 months post‐sea transfer, and the median time from infection with PMCV until outbreak of CMS was 6.5 months. Generally, fish from sites with CMS had higher viral titre and a higher prevalence of PMCV, compared to sites that did not develop clinical CMS. The virus persisted until the point of slaughter at most (11 out of 12) of the sites. The detection of PMCV in all sites suggests that PMCV is more widespread than previously known. Screening for PMCV as a tool to monitor impending outbreaks of CMS must be supported by observations of the health status of the fish and risk factors for development of disease.     

Effect of ultrasonic cavitation on small and large organisms for water disinfection during fish transport

Motivated by the need for additional tools to disinfect discharge water from well boats, and to prevent distribution of salmon lice, the effect of ultrasonic cavitation on the planktonic stages of the salmon louse, nauplii and copepodids, as well as marine heterotrophic bacteria, and the marine green microalgae Tetraselmis suecica, has been investigated. Survival and morphology were registered after different exposure times. Efficacy of the ultrasonic cavitation treatments varied with exposure time. A reduction in survival was registered even for the shortest exposure time (5 seconds) for both naupliar and copepodid stages of the salmon louse (36.7 ± 11.5 and 67.20 ± 7.2% survival respectively). Survival reached zero after exposure times of 20 and 60 seconds for the nauplii and copepodid stages, respectively. A reduction in 70% was observed for bacteria at all exposure times (5 to 300 s), while a reduction of 95% was observed after 300 s for algal cells. The logged energy transfer to the samples was on average 17.5 J/s. In conclusion, cavitation treatment is destructive for the planktonic stages of salmon lice, and may contribute to reduce discharge of pathogens and parasites from well boats when adapted for this purpose and combined with existing water disinfection methods.