Three-dimensional imaging of a sawn surface: a comparison of confocal microscopy,scanning electron microscopy,and light microscopy combined with serial sectioning

The three-dimensional structure of a transverse sawn wood surface was investigated using several methods, to compare techniques, and to study the types of deformation in tracheids at the saw cut. A sample of spruce sapwood was cut with a fret saw across the grain. The transverse sawn surface was imaged by confocal microscopy, field emission scanning electron microscopy (FESEM), and by light microscopy combined with serial sectioning and three-dimensional (3D) reconstruction. Both confocal microscopy and FESEM were restricted to visualising the cut surface of the wood. However, serial sectioning was able to reveal the internal structure below the cut surface providing more information on the types of cell deformation present. The wood structure was deformed to depths of more than 600 μm below the surface with twisting, crushing and tearing deformations. Near the outer surface, gaps were formed between groups of tracheids where the cell walls had been torn away to form saw dust. The deformation tended to form groups of tracheids that were twisted relative to each other. Latewood was less distorted, forming a dense solid surface compared to the highly fibrous earlywood.     

Characterization of wood-based multi-material systems under dynamic impact stress

ABSTRACT

Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were dynamically sudden loads, in the form of impact bending and dart drop tests (penetration and impact mode). It has been shown that the use of the reinforcing materials leads to a significant improvement in material properties. The penetration energy of the composites reinforced with the aramid fiber fabric could be increased by 43%. The maximum force in the dart drop test (impact mode) could be increased by 29% with the stainless steel foil, the damping decreased by 48%. The aramid fiber reinforcement achieved an increase in impact resistance by 27% in impact bending test, the steel reinforced achieved an increase of 39%. A clear dependency on both, the climate and the adhesive within the composite, could be demonstrated.     

The relative importance of dispersal limitation and habitat preference in shaping spatial distribution of saplings in a tropical moist forest: a case study along a combination of hydromorphic and canopy disturbance gradients

• Introduction   

Various processes contribute to shaping the local assemblage of species in hyperdiverse tropical forest. The relative contribution of environmental factors and dispersal limitation in determining the spatial distribution of saplings at local scale is unclear.     

Age determination of large live trees with inner cavities: radiocarbon dating of Platland tree,a giant African baobab

• Introduction   

For large trees without a continuous sequence of growth rings in their trunk, such as the African baobab (Adansonia digitata L.), the only accurate method for age determination is radiocarbon dating. As of today, this method was limited to dating samples collected from the remains of dead specimens.     

The successional status of sugar maple (Acer saccharum), revisited

Two complementary experimental designs at two contrasting scales (landscape/long term; individual tree/short term) were used for an in-depth evaluation of the successional status of sugar maple (AS: Acer saccharum Marsh.). First, forest disturbances during the 20th century and composition were mapped for two landscapes in the Du Lièvre watershed of southern Quebec. Our results show that, as well as dominating stands in the absence of fire, AS often rapidly developed dominance after fire, especially in the south of our study area. Similarly, a majority of AS-dominated stands clearcut in 1928 continued to be AS-dominated 60 years later. Second, we examined AS seedlings planted under two very contrasting light regimes. AS seedlings showed a combination of traits particularly adapted to tolerate shade under a low light regime. However, owing to a surprisingly high phenotypic plasticity, AS also exhibited efficient development under high light. This suggests the classification of AS as a late-successional species should indeed be revised and that generalist or trans-successional would be a more appropriate designation for this species. We discuss the ramifications of such a status revision, with an emphasis on the implications for its silviculture.     

Establishment,survivorship, and growth of yellow birch seedlings after site preparation treatments in large gaps

The occurrence of yellow birch (YB) in the northeastern forests of North America is a source of concern. Several guidelines suggest ways to favor the regeneration of this species, including creating openings from small gaps to large clearcuts, coupled or not with a variety of soil preparation treatments. However, it is not clear if soil preparation treatment favors YB establishment by simply increasing the availability of good seedbed types, or by also altering competition pressure exerted by interfering species during the period of seedling establishment. For this study, large gaps (900 m²) were created in a 70-year old YB dominated forest, to which three treatments differing in soil disturbance intensities were applied (i.e., soil scarification (i) using a rake [raking]; or (ii) by dragging slash out to the edges of the gap [slash drag]; and (iii) limited to the passage of the harvesting equipment [control]). The proportion of seedbed types reportedly most favorable for YB establishment (i.e., mineral-dominated) increased as the severity of the site preparation increased. The opposite was observed for organic-dominated seedbeds. As a result, the stocking of YB seedlings increased with the severity of site preparation. However, YB stocking was deemed sufficient in all gaps to ensure future canopy dominance, even in the control treatment. Although YB seedlings generally achieved greater heights as site preparation intensity increased, it was clear that this did not reflect vigorous growth as, on average, greater heights coincided with greater seedling height–diameter ratios. At the seedbed level, height–diameter ratio was associated with an increase in surrounding competition pressure and an increase in the incidence of stem apical death (SAD), which in turn decreased height differences among seedbed types by the end of the study. At the gap level, this blurred the advantages of site preparation over a laisser-faire strategy. The incidence of SAD was greatest in the slash drag and the rake treatments. Consequently, we cannot say that intense soil scarification is worth the expenses, especially in stands where YB seed sources are abundant.     

Performance of northern red oak enrichment plantings in naturally regenerating Southern Appalachian hardwood stands

The limited success of methods to naturally regenerate northern red oak (Quercus rubra L.) has increased the use of artificial techniques to improve overall oak composition. Enrichment plantings are often recommended as a means to supplement species composition within the existing natural reproduction. Previous enrichment efforts have often resulted in low survival and poor growth, generally due to poor planting stock quality and a lack of competition control. In this study, high quality northern red oak seedlings were established on four recently harvested sites in western North Carolina using one of four competition control treatments (untreated, year 1 control, year 2 control or a weed mat) in a 1.2 × 1.2 m area around each seedling with or without a soil fertility amendment. The 3 year results show that competition control and fertilization treatments had few positive impacts on survival and growth of the planted seedlings. These results suggest that either the treatment area was insufficient to adequately release the seedlings, or other factors like belowground competition from existing advance reproduction and/or stump sprouts may be important determinants of the overall success of northern red oak enrichment plantings on recently harvested sites.     

Impacts of resource extraction on forest structure and diversity in Bardia National Park,Nepal

Repeated biomass harvesting for human livelihood needs can cause significant changes in forest structure, composition and diversity. Such impacts have often been associated with the distance to villages and their size, but the effects of individual villages in relation to their characteristics have been little studied. Focussing on the issues around communities’ impacts on the forest, this research aimed to understand how resource extraction by two Buffer Zone villages in Nepal's Bardia National Park affects forest structure and diversity. Tree density, basal area, diameter at breast height (DBH), species richness, two diversity indices and disturbance indices were recorded in 108 plots in 12 transects, from March till May 2005, within the park along the village boundaries, where resource extraction occurs, and in the core park area which is isolated from human disturbance. Forest subject to resource extraction had a lower density of trees, smaller DBH and lower species richness and diversity. Forest disturbance declined with distance from the villages but the two villages differed widely in their impact on the forest. Resource use was more intensive in Shivapur village and percentage of trees lopped, average lopping intensity and numbers of dung piles were statistically significant. This was mainly due to the lack of access to Buffer Zone community Forest for Shivapur households. Interviews with villagers suggested that there have been changes in species availability compared to 5 years ago. Households also underestimated the impact of their resource extraction, which may prevent them from changing their behaviour to benefit conservation. It is clear that understanding rural communities’ needs, their framing of resource extraction and utilisation, and dependence on forest resources will be very helpful for long term conservation measures.     

Barriers to natural regeneration in temperate forests across the USA

New Forests - For millennia, natural disturbance regimes, including anthropogenic fire and hunting practices, have led to forest regeneration patterns that created a diversity of forest lands...