Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method

This paper presents a probabilistic method of evaluating the final moisture content (MC) of lumber obtained at the end of the kiln-drying process. The final MC data of three different drying tests conducted in past studies were analyzed using the bootstrap method. Target MC was tentatively set below 20 % in the analysis. Two characteristic parameters representing the final MC were estimated with bootstrap confidence intervals. These parameters were the standard deviation (SD) and the percentage of the population that met the MC requirement of less than 20 % (P ₂₀). The histograms of the final MC and the subsequent goodness-of-fit tests revealed that the final MC data of two drying tests did not follow any classical probability distributions, including Normal, Log-Normal, Weibull, and Gamma distributions, thus indicating the need for nonparametric statistics. The uncertainty of the final MC could be evaluated with the estimated SD and P ₂₀. After deriving the relationships between P ₂₀ and the corresponding probability that P ₂₀ is not achieved, we demonstrated how such relationships could provide a kiln operator with information to facilitate better decision-making in optimizing a drying schedule.     

Effect of moisture content of members on mechanical properties of timber joints

To investigate the effect of moisture content (MC) of members on the mechanical properties of timber joints, bending tests of precut joints and shear tests of dowel-type joints were carried out using timbers of Japanese cedar (Cryptomeria japonica D. Don) with three moisture conditions: green, kiln-dried with a MC target of 15%, and over-kiln-dried with a MC target of 5%. For the bending test, timbers were processed with a precut processing machine into “koshikake-ari” (a kind of dovetail joint) and “koshikake-kama” (a kind of mortise and tenon joint). A pair of members was jointed together without mechanical fasteners. Bolts (diameter = 12 mm) and nails (diameter = 2.45 mm) were used as dowels in the shear test. Bolted joints were constructed with one bolt and two metal side plates. Two nails and two metal side plates were used for the nailed joint. For precut joints, no clear effect of MC was recognized on maximum moment and initial stiffness. The maximum strength of mechanical joints assembled with kiln-dried wood was changed by the degree of drying. Stiffness of the joints assembled with kiln-dried specimens was larger than that of the joints assembled with green specimens.Part of this study was presented at the 7th International IUFRO Wood Drying Conference, Tsukuba, July 2001     

Effect of feeding Aspergillus awamori and canola seed on the growth performance and muscle fatty acid profile in broiler chicken

The aim of this study was to examine effects of dietary supplementation with Aspergillus awamori and feeding canola seed on the growth and fatty acid profile in broilers. Twenty‐eight chicks (15 days old) were assigned to the following groups: (1) control, fed a basal diet; (2) awamori, fed the basal diet supplemented with 0.05% A. awamori; (3) canola, fed a diet containing 5% canola seed; and (4) canola + awamori, fed the canola diet supplemented with A. awamori (seven birds/group). Body weight gain was increased by A. awamori but not influenced by canola seed. Breast muscle weight was increased in either awamori or canola groups. Although plasma triglyceride and cholesterol were decreased by feeding A. awamori or canola seed, fat content in the breast muscle were increased, accompanied by decrease in saturated fatty acids and increase in unsaturated fatty acids. Moreover, decreased thiobarbituric acid reactive substance and increased α‐tocopherol content in the breast muscle was observed in all experimental groups. In conclusion, these results suggested that feeding canola seed and A. awamori might improve growth performance, and modified muscle fatty acid profile and α‐tocopherol content, suggesting that they may improve meat quality.     

Expression of HSP70 in response to heat-shock and its cDNA cloning from Mediterranean blue mussel

Expression of HSP70 in response to heat-shock was investigated at the protein and mRNA levels in Mediterranean blue mussel. Western and Northern blot analyses revealed that HSP70 was expressed following heat-shock in the mantle at both protein and mRNA levels, suggesting that gene expression of HSP70 is implicated in the cellular response to heat-shock stress in mussel. It was then attempted to clone HSP70 cDNA in order to determine the primary structure of mussel HSP70. As a result, two full-length cDNA encoding HSP70 were isolated from a cDNA library prepared from the heat-shocked mantle. The isolated cDNA consist of single open reading frames of 2067 bp and 1911 bp which encode proteins of 689 amino acids and 637 amino acids, respectively. Both HSP70 cDNA encode an ATPase do main, and a substrate-binding do main in addition to a Glu-Glu-Val-Asp (EEVD) peptide motif that is specific for cytosolic HSP70. These findings suggest that the cDNA clones obtained in the present study encode cytosolic HSP70.     

Effect of hypoxia on generation of neurospheres from adipose tissue-derived canine mesenchymal stromal cells

Adipose tissue-derived mesenchymal stromal cells (AT-MSCs) are good candidates for cell therapy due to the accessibility of fat tissue and the abundance of AT-MSCs therein. Neurospheres are free-floating spherical condensations of cells with neural stem/progenitor cell (NSPC) characteristics that can be derived from AT-MSCs. The aims of this study were to examine the influence of oxygen (O₂) tension on generation of neurospheres from canine AT-MSCs (AT-cMSCs) and to develop a hypoxic cell culture system to enhance the survival and therapeutic benefit of generated neurospheres.AT-cMSCs were cultured under varying oxygen tensions (1%, 5% and 21%) in a neurosphere culture system. Neurosphere number and area were evaluated and NSPC markers were quantified using real-time quantitative PCR (qPCR). Effects of oxygen on neurosphere expression of hypoxia inducible factor 1, α subunit (HIF1A) and its target genes, erythropoietin receptor (EPOR), chemokine (C-X-C motif) receptor 4 (CXCR4) and vascular endothelial growth factor (VEGF), were quantified by qPCR. Neural differentiation potential was evaluated in 21% O₂ by cell morphology and qPCR.Neurospheres were successfully generated from AT-cMSCs at all O₂ tensions. Expression of nestin mRNA (NES) was significantly increased after neurosphere culture and was significantly higher in 1% O₂ compared to 5% and 21% O₂. Neurospheres cultured in 1% O₂ had significantly increased levels of VEGF and EPOR. There was a significant increase in CXCR4 expression in neurospheres generated at all O₂ tensions. Neurosphere culture under hypoxia had no negative effect on subsequent neural differentiation. This study suggests that generation of neurospheres under hypoxia could be beneficial when considering these cells for neurological cell therapies.     

Chlorantraniliprole application differentially affects adult emergence of Sympetrum dragonflies in rice paddy fields

Paddy and Water Environment - Rice paddy fields are important habitat for many dragonfly species. In Japan, populations of dragonflies inhabiting rice paddies, in particular Sympetrum (Odonata:...     

Pathological changes of tracheal mucosa in chickens infected with infectious laryngotracheitis virus

Six-week-old chickens were inoculated via the posterior thoracic air sac with infectious laryngotracheitis virus. Chickens were sacrificed on various days through day 16 postinoculation (PI), and the trachea was examined by scanning electron microscopy (SEM) and light microscopy (LM). The pathological changes observed on day 1 PI were hypertrophy and hyperplasia of goblet cells. From day 3 PI, the epithelial cells protruded collectively and fused to form syncytia, which contained many intranuclear inclusion bodies. Subsequently, epithelial syncytia desquamated, one after another, and connective tissues were exposed in places. Serofibrinous exudate and detritus were abundant on the surface of the exposed connective tissues and seemed to form a pseudomembrane. On day 5 PI, the remaining epithelial cells began to repair the devastated mucosa just under the pseudomembrane. On day 6 PI, microvillus-rich regenerating epithelial cells were arranged like paving stones. On day 8 PI, the epithelial cells proliferated extensively and formed folds with cyst-like structures. By day 16 PI, the tracheal epithelium was covered with cilia and regained its normal histologic appearance.     

Evaluation of 5 Types of Fishing Material, 2 Sterilization Methods, and a Crimp-Clamp System for Extra-Articular Stabilization of the Canine Stifle Joint

OBJECTIVE: To evaluate the mechanical properties of 5 types of fishing material, 2 sterilization methods, and a commercially designed crimp-clamp system for the extra-articular repair of the canine stifle joint. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Animals were not used in this study. METHODS: Two brands of monofilament nylon fishing line and 3 brands of monofilament nylon leader line were used to determine the effect of steam and ethylene oxide sterilization on strength and elongation of the material. A strand of 36-kg test monofilament nylon fishing material was wrapped around 2 rods or knotted to form a loop around 2 rods on a materials-testing machine. Ten trials of each brand of unsterilized, steam-sterilized, and ethylene oxide-sterilized fishing material were tested. A strand of each material was elongated to failure at a constant displacement of 1,000 mm/min to determine strength. A strand of each material was cycled 10 times to a load of 50 N to determine percent elongation. The brand of fishing material with the greatest strength and least elongation was crimped to form a loop around 2 rods on a materials-testing machine and tested as described above. ANOVA was used to determine the effect of sterilization method, brand of material, knot, wrap, and crimp on strength and elongation of the material, and a post-hoc t test was used when significant differences were found. A Student t test was used to compare fixation techniques (wrap, knot, and crimp). RESULTS: Sterilization by steam or ethylene oxide had no significant effect on the strength of the nylon fishing material. Steam sterilization resulted in significant increases (2- to 4-fold) in elongation of most nylon fishing material when compared with unsterilized material. Ethylene oxide sterilization had minimal effect on elongation of the fishing material. Mason leader line showed no significant change in strength or elongation regardless of sterilization method. Significantly less strength and significantly less elongation were demonstrated in Mason leader line that was crimped as compared with Mason leader line that was knotted. CONCLUSION: Ethlylene oxide was the preferred method of sterilization to preserve strength and minimize elongation of the fishing material. Of the materials tested, Mason leader line had the least elongation and the greatest preservation of strength when ethylene oxide was used as the sterilization method. Mason leader line and Sufix fishing line were comparable choices when steam was used as the sterilization method. Significantly less elongation was demonstrated in crimped Mason leader line as compared with knotted Mason leader line. CLINICAL RELEVANCE: Of the materials tested, Mason leader line and Sufix fishing line had the best mechanical properties for extracapsular stabilization of the canine stifle joint. Crimping is an attractive alternative to knotting and results in a reduction in elongation of the nylon fishing material.