Effect of temperature and time on mechanical and electrical properties of HDPE/glass fiber composites

In recent years, composites based on glass fiber reinforced polymer have been widely used in order to meet increasing durability and safety regulations, particularly in the power cable, automotive and plane industry. In this paper, mechanical and electrical properties of high density polyethylene (HDPE) and HDPE containing glass fiber polymer composites were investigated and compared at different temperatures. Composite materials were prepared with the hot pressing method. Tensile strength, % elongation and the modulus of elasticity (or Young’s modulus) were determined for each sample at different temperatures. In addition to this, at different temperatures τ _σ and τ _E have mechanical and electrical lifetime respectively, corresponding to mechanical tension (σ) and electrical strength (E), and this was investigated for each sample. As compared to the mechanical and electrical properties of neat HDPE, HDPE/0.5 % glass fiber composites have been found to have better mechanical and electrical durability.     

Einfluß der N-Düngung auf den 14C-Einbau in die Komponenten der äthanollöslichen Fraktion von Sommerweizen verschiedener Entwicklungsstadien

Influence of N-fertilization on the ¹⁴C-labelling of the ethanol soluble fraction and its components in spring wheat at different stages of development In spring wheat plants from pot experiments the effect of different N-fertilization on the ¹⁴C-labelling of the soluble fractions of amino acids, organic acids, and carbohydrates was studied. The fraction of ¹⁴C-labelled compounds, soluble in ethanol, was 50% at the start of the experiment, about 100% during flowering stage and 45% at the end of the experiment. At the end of the 24h ¹⁴CO₂-assimilation period 90% of the activity in the plants were water soluble, carbohydrates containing 10 to 20 times higher ¹⁴C-activity than amino or organic acids. In plant labelled with ¹⁴CO₂ during emergence of the ears, the solubility of ₁₄C-labelled assimilates decreased till the ripening stage to 15% of the total ¹⁴C-activity, whereas the total activity itself decreased only to 50–80% during the same time. The higher N-supply results in an enhanced decrease of soluble carbohydrates and in an increase of the soluble amino acid fraction. This leads also to an increased protein synthesis and ¹⁴C-assimilation into the protein of the kernels. The most important plant parts in respect to photosynthesis during the experiment period were upper leaves, upper stems and ears. The ¹⁴C-distribution throughout the plant is mainly determined by the time after ¹⁴CO₂-treatment and less by the N-fertilization. This points to similar pathways of ¹⁴CO₂-assimilation in all trials. It is concluded, that the positive effect of the high N-fertilization on the yield is due to the quick transformation of soluble assimilates into insoluble compounds, e.g. proteins and protein precursors. Increase of yield by high N-fertilization is also due to a prolonged period of photosynthesis and therefore delayed ripening of the photosynthetic active plant parts.     

Resin canal traits relevant for constitutive resistance of Norway spruce against bark beetles: environmental and genetic variability

The influence of genetic determination and environment on the variability of secondary resin canal traits was investigated on 15–19-year-old Norway spruce (Picea abies (L.) Karst.) clones grown in Lower Austria (Pressbaum and Ulmerfeld) and southern Sweden (Knutstorp and Hermanstorp). Eleven and 20 clones were present on the two Austrian and the two Swedish sites, respectively. The sites differed in their water availability, as indicated by different annual precipitation and soil type. Resin canal traits measured were the number of epithelial cells per canal, the number of resin canals per unit tangential wood surface area, the mean resin canal area and the total resin canal area per unit tangential wood surface area. The latter three traits are known to be related to the constitutive resin flow of Norway spruce.

Environment had an influence on the variability of resin canal traits but the most important factor for the variability was the tree’s genetic disposition. Within countries, clones from the drier sites (Pressbaum and Hermanstorp) showed significantly smaller resin canals. Trees from Pressbaum also had smaller total resin canal areas than trees from Ulmerfeld. The number of epithelial cells and the number of canals did not differ between sites.

Resin canal traits had wide genetic variation and high broad sense heritabilities (H²), with values between 0.28 and 0.82. Highest heritability values were reached for the number of epithelial cells and the number of canals (H² > 0.8). Genotypic correlations across trials were high for the resin canal traits and approached 1 in both the Austrian and the Swedish trials, indicating that there was little genotype by environment interaction for these traits and thus the ranking of clones was very similar in the different environments.

The number of epithelial cells, the mean area and the total resin canal area showed either moderately significant positive genotypic correlations with tree growth traits or none at all.

In a breeding context, our results are encouraging and indicate that high constitutive defence potential against bark beetles, such as Ips typographus, is not aligned with low volume growth. But it should be taken into consideration that environment and forestry practices can also have an impact on the resin reservoir provided by the radial resin canals.     

Three cases of prolapse of the nictitans gland in cats

We report three cases of adult cats showing a prolapse of the gland of the third eyelid. Three different breeds were affected: Burmese, Persian and Domestic Short-haired. In all cases, the disorder occurred spontaneously, without any other ocular sign. Surgical replacement of the gland was performed using the Morgan pocket technique. Good esthetic results were obtained, and no recurrence occurred.     

Influence of irrigation on the distribution and control of the nematode Meloidogyne javanica by the biocontrol bacterium Pasteuria penetrans in the field

Pasteuria penetrans, a bacterial parasite of plant-parasitic nematodes, is used to control root-knot nematode Meloidogyne spp. populations in vegetable crops. But its efficiency is variable, mostly because of the patchy distribution of the bacteria in arable fields. As the infective P. penetrans are non-motile bacteria in soil, abiotic soil factors can affect the bacteria–nematode relationships. An epidemiological study, conducted in a vegetable field, showed that abiotic factors such as irrigation, soil water holding capacity and texture, affected the efficiency of P. penetrans. A correspondence analysis between these abiotic factors and the density of P. penetrans spores in the soil, and the proportion of Meloidogyne javanica juveniles infected by the bacteria, revealed that irrigation affected directly the distribution of the spores in soil pores related to their passive transport by water flow. Laboratory experiments conducted on the passive transport of spores confirmed that intensive irrigation leached the spores down the soil profile and decreased the percentage of infected Meloidogyne juveniles.     

DISPERSAL PATTERN OF INJECTATE FOLLOWING CT‐GUIDED PERINEURAL INFILTRATION IN THE CANINE THORACOLUMBAR SPINE: A CADAVER STUDY

An increasing proportion of canine patients are presented with chronic thoracolumbar back pain and without compressive spinal lesions. In humans, spinal perineural infiltrations have been reported to have a favorable effect on pain control. The purpose of this prospective cadaver study was to describe the dispersal pattern of injectate following CT‐guided spinal perineural infiltration in the canine thoracolumbar region. Seven fresh canine cadavers were first scanned using multislice CT and then CT‐guided spinal perineural infiltration was performed at 42 sites from T13/L1 to L6/L7. The injectate for each site was a mixture of new methylene blue and iodinated contrast medium. Immediately following CT‐guided injection, cadavers were frozen, cut, and dissected macro‐ and mesoscopically (using a magnifying glass) to identify anatomic structures that were infiltrated. In the majority of sites (64.3%), complete epidural and hypaxial staining of spinal nerve components (including the spinal ganglion, trunk, and ventral branch) was successfully achieved. However, no (11.9%) or unpredictable staining (9.5%) of nervous tissue occurred in some sites despite careful CT guidance and the application of relatively large volumes of injectate. Optimal results were achieved when the needle tip was positioned periforaminally ventral to the cranial contour of the cranial articular process. Findings from this ex vivo study indicated that CT‐guided spinal perineural infiltration is feasible for testing in the canine thoracolumbar region and that successful nerve tissue infiltration would likely occur in the majority of sites. Future in vivo studies are needed to determine the safety and efficacy of this technique.