Period of susceptibility of almonds to aflatoxin contamination during development in the orchard

Almonds can be contaminated with aflatoxins, produced mainly by Aspergillus flavus and A. parasiticus. Infection can be facilitated by insect injuries during hull split, which begins four to six weeks before harvest. Within this period, it is unknown which kernel stages are most susceptible to aflatoxin contamination. Developing almonds of the Nonpareil cultivar were inoculated weekly with a spore suspension of A. flavus or A. parasiticus for five weeks after hull split in 2013. The almonds were infested with eggs of the lepidopteron navel orangeworm (NOW) (Amyelois transitella) before each spore inoculation. Aflatoxin levels were quantified at harvest using HPLC. Aflatoxin contamination was consistently higher in NOW-damaged kernels, although aflatoxins were also detected in undamaged kernels at each inoculation date. Insect injury is not required for kernel infection but it is a key risk factor for high aflatoxin contamination. Laboratory inoculations were also performed on Nonpareil almond kernels collected during the summers of 2013 and 2015. Aflatoxin levels were significantly lower on dried almonds but the ability to produce aflatoxins was restored when almonds were incubated with high humidity or when the Aspergillus species were inoculated on almond meal agar amended with ground kernels. Therefore, aflatoxins can accumulate in kernels with low a_w, should sufficient moisture favors aflatoxin production. In our field experiment, the orchard micro-climate had sufficient humidity to enable aflatoxin production in both damaged and undamaged dried kernels.     

Enhancing the effectiveness of biological control programs of invasive species through a more comprehensive pest management approach

Invasive species are one of the greatest economic and ecological threats to agriculture and natural areas in the US and the world. Among the available management tools, biological control provides one of the most economical and long‐term effective strategies for managing widespread and damaging invasive species populations of nearly all taxa. However, integrating biological control programs in a more complete integrated pest management approach that utilizes increased information and communication, post‐release monitoring, adaptive management practices, long‐term stewardship strategies, and new and innovative ecological and genetic technologies can greatly improve the effectiveness of biological control. In addition, expanding partnerships among relevant national, regional, and local agencies, as well as academic scientists and land managers, offers far greater opportunities for long‐term success in the suppression of established invasive species. In this paper we direct our recommendations to federal agencies that oversee, fund, conduct research, and develop classical biological control programs for invasive species. By incorporating these recommendations into adaptive management strategies, private and public land managers will have far greater opportunities for long‐term success in suppression of established invasive species. © 2016 Society of Chemical Industry     

American beech leaf‐litter leachate chemistry: Effects of geography and phenophase

The decomposition of broadleaved tree leaves can contribute a substantial amount of energy to forested watersheds via dissolved organic matter (DOM), nutrients, and biological activity. Less is known about how these inputs may vary within a single tree species that is known to have two genetically distinct and geographically separate populations, or how these inputs may change throughout autumn senescence and abscission. It is often implicitly assumed that intraspecific differences in leaf‐litter leachate chemistry do not significantly differ geographically. We analyzed the morphological and chemical leaf traits and leachates from Fagus grandifolia (American beech) leaves (n = 360) during three phenophases: fresh green leaves, senescing leaves, and fallen leaves. During each phenophase, leaves were collected from four sites along a geographic transect stretching from Vermont to North Carolina (over 1400 km), with two sites representing each genetic population and differing climatic conditions. Leachates were analyzed for routine solutes and nutrients, as well as fluorescent and UV‐visible absorbance indices. Amounts of macro‐ and micronutrients were highly variable among sites and phenophases but tended to be lowest during the fallen‐leaf phase, while measured fluorescence and absorbance indices tended to increase during the senescing‐leaf phase and plateau. Results suggest significant differences in leached nutrients among sites, and optical properties and nutrients among phenophases. Aromaticity and molecular weight of DOM in leachates was generally low, and aromaticity and humification of leachates both increased over time with leaf age. These results also suggest that geographically (or genetically) separate populations of the same species do not experience senescence in the same way and that implicit assumptions of intraspecific uniformity of leaf‐litter leachate chemistry for a given tree species may be invalid.     

Role of ‘<Emphasis Type="Italic">Candidatus</Emphasis> Liberibacter solanacearum’ and <Emphasis Type="Italic">Bactericera cockerelli</Emphasis> Haplotypes in Zebra Chip Incidence and Symptom Severity

Two haplotypes of the pathogen, ‘Candidatus Liberibacter solanacearum,’ (Lso) and four haplotypes of the insect vector, Bactericera cockerelli, are associated with zebra chip disease of potato. Whether disease severity or incidence is influenced by pathogen or insect haplotype is poorly understood. The role of Lso ‘A’ and ‘B,’ transmitted by three haplotypes of B. cockerelli, on disease severity and incidence in eight potato cultivars was analyzed. Both haplotypes of Lso induced tuber symptoms. In general, Lso B caused higher incidence of symptoms, and greater reduction in tubers compared with Lso A. Lso B was associated with more severe tuber symptoms, producing fewer mild or moderate tuber symptoms. Lso A was associated with less severe tuber symptoms, despite being able to induce severe symptoms. Disease incidence, tuber yield, and symptom severity ratings were not dependent upon the psyllid haplotype transmitting the pathogen, suggesting that pathogen, not insect haplotype affects Lso transmission.     

Inherently Flame Retardant Nylon 6 Nanocomposite Fibers

In this study, inherently flame retardant nanocomposite nylon 6 fibers infused with nanoclay and intumescent additives were compounded and melt-spun. Two approaches were adopted to mitigate the loss of mechanical properties typically observed nanocomposite fiber systems: (a) additive particle size reduction; and (b) elastomer toughening of the nanocomposite system. As a result, the ductility of the FR nanocomposite formulations was improved significantly. Structural and morphological characterization of the melt-spun fibers using TEM and XRD demonstrated good dispersion of the additives and exfoliation of the nanoclay platelets. Microscale Combustion Calorimetry analysis demonstrated effective reduction of heat release capacity and thus significant enhancement of flame retardant performance of the compounded fibers.     

Translating the terrestrial mitigation hierarchy to marine megafauna by‐catch

In terrestrial and coastal systems, the mitigation hierarchy is widely and increasingly used to guide actions to ensure that no net loss of biodiversity ensues from development. We develop a conceptual model which applies this approach to the mitigation of marine megafauna by‐catch in fisheries, going from defining an overarching goal with an associated quantitative target, through avoidance, minimization, remediation to offsetting. We demonstrate the framework's utility as a tool for structuring thinking and exposing uncertainties. We draw comparisons between debates ongoing in terrestrial situations and in by‐catch mitigation, to show how insights from each could inform the other; these are the hierarchical nature of mitigation, out‐of‐kind offsets, research as an offset, incentivizing implementation of mitigation measures, societal limits and uncertainty. We explore how economic incentives could be used throughout the hierarchy to improve the achievement of by‐catch goals. We conclude by highlighting the importance of clear agreed goals, of thinking beyond single species and individual jurisdictions to account for complex interactions and policy leakage, of taking uncertainty explicitly into account and of thinking creatively about approaches to by‐catch mitigation in order to improve outcomes for conservation and fishers. We suggest that the framework set out here could be helpful in supporting efforts to improve by‐catch mitigation efforts and highlight the need for a full empirical application to substantiate this.     

An assessment of the risk of Bt-cowpea to non-target organisms in West Africa

Cowpea (Vigna unguiculata Walp.) is the most economically important legume crop in arid regions of sub-Saharan Africa. Cowpea is grown primarily by subsistence farmers who consume the leaves, pods and grain on farm or sell grain in local markets. Processed cowpea foods such as akara (a deep-fat fried fritter) are popular in the rapidly expanding urban areas. Demand far exceeds production due, in part, to a variety of insect pests including, in particular, the lepidopteran legume pod borer (LPB) Maruca vitrata. Genetically engineered Bt-cowpea, based on cry1Ab (Event 709) and cry2Ab transgenes, is being developed for use in sub-Saharan Africa to address losses from the LBP. Before environmental release of transgenic cowpeas, the Bt Cry proteins they express need to be assessed for potential effects on non-target organisms, particularly arthropods. Presented here is an assessment of the potential effects of those Cry proteins expressed in cowpea for control of LPB. Based on the history of safe use of Bt proteins, as well as the fauna associated with cultivated and wild cowpea in sub-Saharan Africa results indicate negligible effects on non-target organisms.     

Acoustic evaluation of loblolly pine tree- and lumber-length logs allows for segregation of lumber modulus of elasticity,not for modulus of rupture

Key message

Loblolly pine ( Pinus taeda ) logs can be evaluated using acoustic velocity whereby threshold acoustic velocity values can be set to ensure lumber meets specified mechanical property design values for modulus of elasticity.

Context

There is a need to better sort logs according to lumber quality for improved decision making and wood utilization because merchantable logs are being harvested from different stand types including natural forests, conventional plantations, and intensively managed plantations, all with differences in rotation ages, growth rates, and wood quality traits.

Aims

This study aimed to link tree- and lumber-length log acoustic velocity with the resulting lumber properties as tested in static bending from five intensively managed loblolly pine stands in the Atlantic Coastal Plain of Georgia.

Methods

Acoustic velocity was measured using the resonance-based approach on 87 tree-length logs and 244 lumber-length logs. The logs were then processed into 797 pieces of 38 mm by 89 mm (2×4), 140 mm (2×6), 184 mm (2×8), and 235 mm (2×10) dimension lumber, dried, and tested in static bending.

Results

Mean MOE of the lumber had moderate relationships with acoustic velocity of the logs (R ² = 0.49) whereas MOR and acoustic velocity did not have a strong relationship (R ² = 0.20). Accounting for log position increased the performance of the mean lumber MOE model (R ² = 0.62) which was further increased by adding green density and small-end diameter (R ² = 0.67). Utilization of acoustics was effective for segregating logs based on lumber modulus of elasticity and did not depend on knowing tree or stand information such as age, site quality, and silviculture history.

Conclusion

Acoustic velocity evaluation of tree- and lumber-length logs could be employed to segregate logs within the supply chain to ensure that lumber would meet specified design values.