宜昌大老岭地区薇菜的自然分布及人工繁殖技术研究

薇菜是1种具有经济开发潜力的食用蕨类植物,但其经济利用受到野生资源量的限制。为了探讨其适宜的生长条件和繁殖方式,作者对宜昌大老岭地区的野生薇菜种群进行了野外调查和人工繁殖试验。研究表明:①偏好以软阔树种占优势的中、成龄森林立地,成熟针叶林和中、成龄硬阔林立地次之;以海拔900~1 500 m最为适宜;分布以北坡为主。②利用野生母株繁殖,生长快、见效早;孢子繁殖母株培育时间长,但投入产出比低,经济效益好。③薇菜对土壤肥力要求高,施高效叶面肥能快速促进其生长,提高单位面积产量。     

明清时期西辽河地区农业开发的动力与制约因素

在辽金元农业开发的基础上,明清时期西辽河地区农业开发取得了很大进步。农业发展有利于维护西辽河地区乃至边疆地区的稳定,良好的农业开发环境促进了西辽河地区经济繁荣。明清两代非常重视农业,大力支持西辽河地区的农业开发,给予西辽河地区农业生产资料,加之其他政策的实行、农业生产技术的传授、高产耐旱粮食作物的栽培和驿站、桥梁的建设等,使西辽河地区的农业开发成果颇丰,至清代更加显著。自然灾害等成为制约农业开发的主要因素。本文在前人研究的基础上,对西辽河地区农业开发的动力与制约因素做出了进一步讨论。     

利用农田表层(0～20cm)有机碳估算1m土体有机碳的可靠性

<正>土壤有机碳(SOC)是近年来全球变化研究的热点之一,表层(0~20cm)和1m土体的SOC是评估农田SOC的两个重要指标[1]。很多研究利用第二次土壤普查资料来估算农田SOC[2-6],一些研究已表明近20年来我国耕作土壤,尤其是表层(一般为0~20cm)的SOC基本呈增加的趋势[5-8],这与秸秆还田、有机肥与化肥合理施用以及少(免)耕技术推广有关[9-10]。但由于农田SOC,至少是表层SOC,是     

基于电阻抗成像的植物单根断层图像重建

为了实现植物根系结构形态的原位检测,植物根系单根的断层图像重建研究非常必要。该文应用动态电阻抗成像技术对土壤-树根模拟系统进行了图像重建,对重建图像进行二值化处理并求出树根在该系统中的位置坐标、面积和形状,并以树根的位置坐标、面积及形状的相对偏差为指标,分析了图像重建算法、土壤含水率2个因素对成像质量的影响。结果表明：电阻抗成像技术能够实现树木单根断层图像重建;将重建图像进行二值化处理,所得图像更加直观,便于定量评价成像质量;基于Newton单步残差正则化的一步牛顿误差重构（Newton's one-step error reconsruction,NOSER）算法,比基于全变差正则化的主双-内点模式（primal dual-interior point method,PD-IPM）算法的成像质量好;土壤含水率越高成像质量越好。该研究为基于电阻抗成像技术的植物根系结构形态的图像重建提供参考。     

半解析法求解水柱分离与断流弥合水锤问题及机理分析

为了应对长距离输水工程的水锤防护问题,分析了空气阀作用于波状管线有压输水系统发生水力过渡时的瞬态响应过程,提出了空穴增长和溃灭时间、管线最大含气率、最大压力峰值等参数的半解析公式,并由此探讨和研究影响空气阀水锤防护效果的关键因素。半解析解表明,位于空气阀下游的管段相对长度和管线高点的相对高程对系统的断流弥合水锤起了主导作用。将半解析解与特征线法数值解进行了对比,发现两者随主变量的变化趋势一致;分析了半解析解与数值解产生偏差的原因与半解析公式推导过程中几个假设的关系。结果证明,该文提出的半解析公式能够反映空气阀作为水锤防护装置时,主导断流弥合水锤压力峰值的关键因素。该研究可为水锤防护的相关研究提供参考。     

仿海豚皮肤结构的功能表面提高离心泵效率

为了提供一种可利用仿生功能表面提高泵类产品效率的方法,该文分别以鲨鱼皮肤及海豚皮肤表面结构为模仿原型,设计了2种仿生功能表面,模仿鲨鱼皮肤结构的功能表面为模型1,仿海豚皮肤结构的功能表面为模型2,并以吉林市奥吉通泵业有限公司生产的200QJ50-26离心式水泵为载体,进行了试验研究。研究结果表明,模型1可提高水泵效率2%~3%,模型2可提高水泵效率5%,且模型2在全流段范围内增效效果显著。利用氢气泡流动显示试验,从流场尾迹再附点及涡距2个方面说明了上述2种模型对流体介质的控制机制。试验结果表明,模型2相比模型1,其尾迹再附点距离降低5 mm,而尾迹涡距距离却增加3 mm。说明模型2的压差阻力得到降低,此外,模型2通过降低涡生成密度及速度的方式降低能量的耗散,其减阻效果更明显。该研究为仿生功能表面在以流体为工作介质的流体机械及在流体介质中运行的交通工具的全面应用提供了参考。     

Novel royal jelly proteins identified by gel-based and gel-free proteomics

Royal jelly (RJ) plays an important role in caste determination of the honeybee; the genetically same female egg develops into either a queen or worker bee depending on the time and amount of RJ fed to the larvae. RJ also has numerous health-promoting properties for humans. Gel-based and gel-free proteomics approaches and high-performance liquid chromatography-chip quadruple time-of-flight tandem mass spectrometry were applied to comprehensively investigate the protein components of RJ. Overall, 37 and 22 nonredundant proteins were identified by one-dimensional gel electrophoresis and gel-free analysis, respectively, and 19 new proteins were found by these two proteomics approaches. Major royal jelly proteins (MRJPs) were identified as the principal protein components of RJ, and proteins related to carbohydrate metabolism such as glucose oxidase, α-glucosidase precursor, and glucose dehydrogenase were also successfully identified. Importantly, the 19 newly identified proteins were mainly classified into three functional categories: oxidation-reduction (ergic53 CG6822-PA isoform A isoform 1, Sec61 CG9539-PA, and ADP/ATP translocase), protein binding (regucalcin and translationally controlled tumor protein CG4800-PA isoform 1), and lipid transport (apolipophorin-III-like protein). These new findings not only significantly increase the RJ proteome coverage but also help to provide new knowledge of RJ for honeybee biology and potential use for human health promotion.     

群居型和散居型亚洲小车蝗成虫能量代谢相关酶活性测定

为明确亚洲小车蝗Oedaleus asiaticus成虫飞行肌对其体内能源物质利用的情况,采用室内生化法测定能源物质代谢相关5种酶,即3-磷酸甘油醛脱氢酶(glyceraldehyde phosphate dehydrogenase,GAPDH)、3-磷酸甘油脱氢酶(glycerol-3-phosphate dehyd...     

Cotton Chemical Topping by Applying DPC in Different Cotton-Growing Regions

[Objective] The objective of this study was to investigate the stability and universality of cotton chemical topping by applying mepiquat chloride (1,1-dimethyl-piperidinium chloride, DPC) in different cotton-growing regions. [Method] Field experiments were conducted in 2018 at 10 locations in the Yellow River basin (Hejian and Handan, Hebei province; Dezhou and Wudi, Shandong province), the Yangtze River basin (Dafeng, Jiangsu province; Huanggang, Hubei province), and Xinjiang area (Shihezi location I and loacation II, northern Xinjiang and Luntai and Shaya, southern Xinjiang). Local cultivars/lines were used, and the experiments were performed using a randomized complete block design with three or four replicates. Accompanied with typical DPC multi-application in each location, chemical topping was conducted at 10 days before manual topping (T1) or at the same time with manual topping (T2) by applying four dosages of DPC (0, 90, 180, 270 g·hm^－2), manual topping was used as the first control and non-topping as the second control. [Result] The time of chemical topping significantly affected cotton plant height (except for the results in Handan, Dezhou and Wudi) and the number of fruit branches (except for the results in Dafeng and Huanggang). It was observed that earlier chemical topping would result in lower cotton plant height and a fewer fruit branches. In Hejian and Shihezi location I, the average plant height across DPC chemical topping at T1 stage was not only lower than that of T2 stage but also 3.3 cm and 4.6 cm lower than that of manual topping, respectively. In most locations, chemical topping at T1 stage increased around two fruit branches per plant compared with manual topping, while in T2 stage the increased fruit branches per plant ranged from 2.3 to 7.7. Also, we found that a higher dosage of DPC resulted in shorter plant height (except for that in Huanggang). In some locations, plant heights of chemical topping with 180 g·hm^－2 or 270 g·hm^－2 DPC were even shorter than that of manual topping. The number of fruit branches per plant of 0 g·hm^－2 DPC increased by 2.4-8.3 compared with manual topping. However, chemical topping with 90-270 g·hm^－2 DPC significantly reduced the number of fruit branches compared with 0 g·hm^－2 DPC. There were no significant differences in the number of fruit branches among three DPC dosages (90, 180, and 270 g·hm^－2). In Handan, seed cotton yield of chemical topping at T2 stage was significantly lower than that of manual topping due to the decreased boll number, which is possibly associated with the high temperature and drought weather after chemical topping. While at other locations, most treatments of chemical topping by using DPC did not produce significant effects on yield. In addition, chemical topping by using DPC did not delay cotton maturity, characterized by their similar boll-opening rate and the first harvest rate to those of manual topping before spraying harvest aids. [Conclusion] Cotton chemical topping with DPC is more stable and universal across different cotton-growing regions. We suggest that 90-180 g·hm^－2 DPC could be used at the same time with manual topping for cotton chemical topping.     

不同氮磷施用量对丹参产量及有效成份的影响

采用氮、磷二因素五水平二次D-饱和最优设计,于2002年在陕西天士力商洛药用植物有限公司丹参基地进行了施肥对丹参产量及有效成分含量的影响田间试验。结果表明,氮、磷肥对丹参生长、产量和品质有明显影响,同时建立了氮、磷肥对丹参产量肥效反应数学模式,确定丹参的氮、磷肥最佳用量。提出丹参目标产量4500~5000kg/hm2之间的氮、磷用量是氮127.5~196.7kg/hm2;P2O5用量是66.55~153.68kg/hm2。明确了氮、磷肥与丹参有效成分含量动态变化的影响。单纯施用氮肥,会造成丹参素和丹参酮的降低,氮、磷肥合理配合施用,可使丹参高产,同时提高丹参品质。