Assessment of the ideal ratios of digestible essential amino acids for pacu,Piaractus mesopotamicus,juveniles by the amino acid deletion method

The present study aimed to determine the ideal ratios of digestible essential amino acids (EAAs) for pacu (Piaractus mesopotamicus) juveniles by the amino acid (AA) deletion method. A completely randomized design which consisted of 11 treatments and three replicates each was used. The treatments included a control diet (CD) containing 55% of nonpurified natural ingredients and 45% of purified synthetic amino acids and ingredients, and other ten isonitrogenous and isoenergetic EAA limiting diets (LDs), each being deficient in 44.4 ± 0.02% of the respective EAA. Pacu juveniles with initial average body weight of 6.22 ± 0.09 g were distributed among 33 fiber glass tanks. Fish were fed with semipurified and extruded diets for 113 days two times a day until apparent satiation. The ideal ratio of each dietary EAA was calculated on the basis of the relationship between body N retention and amount of EAA deleted from the respective EAA LD. Based on the AA deletion method, the ideal ratios of digestible EAAs for pacu juveniles, relative to lysine requirement of 100% were estimated as: methionine 14.6%, threonine 35.0%, tryptophan 6.6%, arginine 62.8%, histidine 13.6%, isoleucine 26.3%, leucine 43.7%, phenylalanine 27.2%, and valine 35.8%.     

Uncertainty assessment of soya bean yield gaps using DSSAT‐CSM‐CROPGRO‐Soybean calibrated by cultivar maturity groups

Soya bean yield gap can be caused by different factors resulting in uncertainties when the objective is to use such information for farm decision‐making and reference yield determination. Thus, this study aimed to quantify the soya bean yield gap for four sites, located in Southern and Midwestern Brazil, as well as the uncertainties of that related to cultivars, sowing dates, soil types and reference yields. The crop simulation model DSSAT‐CSM‐CROPGRO‐Soybean was calibrated for cultivars with similar maturity groups, based on the data obtained from the best farmers at the county level. The yield gap by water deficit (YG_WD) was obtained through the difference between potential and attainable yields, and that one caused by sub‐optimum crop management (YG_CM) by subtracting actual yield of each county, obtained from official statistics between 1989/90 and 2014/15 growing seasons, from the estimated attainable yield. The yield was simulated using four sowing dates, three soil types and two soya bean maturity groups by county. The reference yield uncertainty was quantified using yield reference from crop model and regional winners of the soya bean yield context, conducted by CESB (Brazilian Soybean Strategic Committee), for the growing seasons from 2013/14 to 2015/16. The crop model showed a good agreement between measured and simulated crop development and growth using calibration by maturity group, with low root mean square error (347 kg/ha). Southern sites had a mean YG_WD of 1,047 kg/ha, while in the Midwest, it was lower than 100 kg/ha. The YG_CM was 1,067, 528, 984 and 848 kg/ha, respectively, for Castro, PR, Mamborê, PR, Montividiu, GO and Primavera do Leste, MT, representing the opportunity for yield gain when having the best farmers as reference. The maturity groups, sowing dates and soil types showed to be an important source of uncertainty for yield gap determination, being recommended to investigate the farms in detail for an appropriate quantification. The reference yield showed expressive uncertainties, with some farmers presenting conditions to increase their soya bean yields by more than 3,000 kg/ha, when considering as reference the yields obtained by the winners’ farmers. These results show that uncertainties must be reduced when assessing farm yield gaps, in order to ensure that expected rate of soya bean yield growth could be reached by adopting the same technologies from CESB winners and best farmers in the county as a reference.     

Visceral leishmaniasis in captive wild canids in Brazil

Visceral leishmaniasis (VL) is endemic in Belo Horizonte (State of Minas Gerais, Brazil). Leishmania sp. can naturally infect several species of mammals, and the domestic dog is the most important reservoir of the disease in South America. This report describes five cases of visceral leishmaniasis in Brazilian canids. Among 15 animals kept in captivity in a zoo in Belo Horizonte (State of Minas Gerais, Brazil), two animals, a bush dog (Spheotos venaticos) and a hoary zorro (Lycalopex vetulus) were serologically positive and developed clinical signs of VL, whereas three other canids, including a crab-eating fox (Cerdocyon thous), a maned wolf (Chrysocyon brachyurus), and a hoary zorro (Lycalopex vetulus) had positive serological results without clinical signs.     

Oxytetracycline treatment reduces bacterial diversity of intestinal microbiota of Atlantic salmon

The effect of oxytetracycline (OTC) treatment on intestinal bacterial populations in juvenile Atlantic salmon Salmo salar was evaluated. Oxytetracycline was administered by way of medicated feed to fish held in experimental tanks. Restriction fragment length polymorphism and sequencing of 16S rDNA from isolates were used to analyze the intestinal microbiota before, during, and after OTC administration. The microbiota from untreated fish was more diverse, consisting mainly of Pseudomonas, Acinetobacter, Bacillus, Flavobacterium, Psycrobacter, and Brevundimonas spp. In contrast, the microbiota of the OTC-treated group was characterized by lower diversity and consisted only of Aeromonas, clustering with A. sobria and A. salmonicida. Antibiotic-resistant isolates were identified as Aeromonas spp.; sequencing the resistance determinant showed it to be the tetE gene. Overall, OTC treatment changed the composition of the intestinal microbiota of Atlantic salmon, as evidenced by a reduction in bacterial diversity. These results support the current concern that antibiotic treatment can facilitate the proliferation of opportunistic bacteria by eradicating competing microorganisms.     

Lesions associated with the plexus venosus subcutaneus collaris of pigeons with chlorophacinone toxicosis

We describe lesions in 29 adult domestic pigeons (Columba livia) poisoned with chlorophacinone, an indandione anticoagulant rodenticide. Birds were found dead in the field and in dovecotes after a wide-area treatment against common voles (Microtus arvalis) based on the dispersion in the open field of wheat grain treated with 0.005% chlorophacinone. At necropsy, most pigeons showed crops full of red-colored wheat grain, extensive subcutaneous hematoma in neck and breast zones, and hemorrhages in lungs and the coelomic cavity. Chlorophacinone was determined in liver samples by high-performance liquid chromatography with ultraviolet detection, and the mean (range) concentration was 11.2 (1.48-50.1) microg/g. Pigeons have a venous subcutaneous plexus in the neck zone (plexus venosus subcutaneus collaris), which has been described as an erectile tissue with a thermoregulation function. This case report describes a relationship between the subcutaneous hemorrhagic lesions and the plexus venosus collaris.     

Increased renal vascular resistance in dogs with hepatic disease

Doppler ultrasound is a non-invasive technique that can be used to estimate vascular resistance by calculation of resistive index (RI) and pulsatility index (PI). Liver disease may increase renal RI and PI, and in humans with liver disease the indices are monitored to attain prognostic information. Systemic hypertension has been found in dogs with hepatic disease and is also related to increased renal vascular resistance in humans. The aim of this study was to examine renal vascular resistance increases in dogs with hepatic disease and to ascertain whether these may be related to blood pressure increases and biochemical parameters. Twenty dogs with hepatic disease were evaluated. The mean renal RI, PI, and systolic blood pressure were significantly higher than in normal animals. A positive correlation was found between the indices and alkaline phosphatase but not with systolic blood pressure. It is concluded that renal vascular resistance may increase in dogs with hepatic disease and in this study was above the limit value in 50% of the animals.     

Meperidine prolongs lidocaine caudal epidural anaesthesia in the horse

The aim of the study was to evaluate and compare the effects of caudal epidural administration of meperidine (MP), lidocaine (LD), and a combination of the two (MPLD) in six mature saddle horses. Horses were randomly assigned to receive three treatments (MP 0.3 mg/kg; LD 0.2 mg/kg; and MPLD: MP 0.3 mg/kg and LD 0.2 mg/kg), with at least 1 week between treatments. Drugs were injected into the epidural space between the first and second coccygeal areas in conscious standing horses. Analgesia, ataxia, sedation, cardiovascular and respiratory effects, and rectal temperature were recorded at different intervals before (baseline) and after administration. Epidural administration of MPLD resulted in a longer duration of analgesia of the tail, perineum, and upper hind limb regions than did administration of MP or LD alone.     

Quantification of EGFR family in canine mammary ductal carcinomas in situ: implications on the histological graduation

Veterinary Research Communications - The epithelial growth factor receptors are transmembrane proteins with an important role in the neoplastic progression of tumors, and in this context, DCIS is...     

Ultra‐thin sectioning and grinding of epoxy plastinated tissue

With classical sheet plastination techniques such as E12, the level and thickness of the freeze‐cut sections decide on what is visible in the final sheet plastinated sections. However, there are other plastination techniques available where we can look for specific anatomical structures through the thickness of the tissue. These techniques include sectioning and grinding of plastinated tissue blocks or thick slices. The ultra‐thin E12 technique, unlike the classic E12 technique, starts with the plastination of a large tissue block. High temperatures (30–60°C) facilitate the vacuum‐forced impregnation by decreasing the viscosity of the E12 and increasing the vapour pressure of the intermediary solvent. By sectioning the cured tissue block with a diamond band saw plastinated sections with a thickness of <300 μm can be obtained. The thickness of plastinated sections can be further reduced by grinding. Resulting sections of <100 µm are suitable for histological staining and microscopic studies. Anatomical structures of interest in thick plastinate slices can be followed by variable manual grinding in a method referred to as Tissue Tracing Technique (TTT). In addition, the tissue thickness can be adapted to the transparency or darkness of tissue types in different regions of the same plastinated section. The aim of this study was to evaluate the advantages of techniques based on sectioning and grinding of plastinated tissue (E12 ultra‐thin and TTT) compared to conventional sheet‐forming techniques (E12).     

E12 technique: Conventional epoxy resin sheet plastination

Epoxy plastination techniques were developed to obtain thin transparent body slices with high anatomical detail. This is facilitated because the plastinated tissue is transparent and the topography of the anatomical structures well preserved. For this reason, thin epoxy slices are currently used for research purposes in both macroscopic and microscopic studies. The protocol for the conventional epoxy technique (E12) follows the main steps of plastination—specimen preparation, dehydration, impregnation and curing/casting. Preparation begins with selection of the specimen, followed by freezing and slicing. Either fresh or fixed (embalmed) tissue is suitable for epoxy plastination, while slice thickness is kept between 1.5 and 3 mm. Impregnation mixture is made of epoxy E12 resin plus E1 hardener (100 ppw; 28 ppw). This mixture is reactive and temperature sensitive, and for this reason, total impregnation time under vacuum at room laboratory temperature should not last for more than 20–24 hr. Casting of impregnated slices is done in either flat chambers or by the so‐called sandwich method in either fresh mixture or the one used for impregnation. Curing is completed at 40°C to allow a complete polymerization of the epoxy‐mixture. After curing, slices can be photographed, scanned or used for anatomical study under screen negatoscope, magnification glass or fluorescent microscope. Based on epoxy sheet plastination, many anatomical papers have recent observations of and/or clarification of anatomical concepts in different areas of medical expertice.