Biomechanical Comparison of the Trocar Tip Point and the Hollow Ground Tip Point for Smooth External Skeletal Fixation Pins

Objective —To compare the insertional characteristics of external fixator pins with hollow ground (HG), modified HG, and trocar (T) points.
Study Design —An acute, in vitro biomechanical evaluation.
Sample Population—Thirteen radii from canine cadavers.
Methods —A total of 16 T-tipped and 16 HG-tipped pins were inserted into 8 canine radii. Ten pins of each modification of the HG tip (length of the cutting edge reduced by 0.127 mm and 0.254 mm, respectively) were inserted into another five radii. All pins were inserted with low-speed power drilling and 80 N drilling load. Differences between peak tip temperature, drilling energy, and pullout force were determined for each pin type at both diaphyseal and metaphyseal locations.
Results —HG-tipped pins showed a 40% lower tip temperature in diaphyseal bone, a 25% reduction in drilling energy in diaphyseal bone, and a reduction of pullout force in both diaphyseal (65%) and metaphyseal (50%) bone compared with T-tipped pins. HG 0.254-mm pins generated higher tip temperatures and had greater pullout than HG pins in diaphyseal bone.
Conclusions —The HG tip was a more efficient design; however, the reduction in pullout force suggests that, because a better hole was drilled, radial preload is reduced. Reduction of the cutting edge by 0.254 mm increased the pullout force but also increased the temperatures.
Clinical Relevance —Thermal and microstructural damage are reduced by the HG tip, but pin-bone interface stability is also compromised. The use of a tip with 0.254 mm reduction in the cutting edge may optimize the biological and mechanical factors at the pin-bone interface.     

Enteric Function in Cats after Subtotal Colectomy for Treatment of Megacolon

The enteric function of four cats that had undergone subtotal colectomy for megacolon was compared with that of four normal cats. All cats were fed the same diet before and during the study. History, physical condition, body weight, blood chemistry panel, fasting and postprandial serum bile acids, serum cobalamin concentration, serum folate concentration, fecal weight, fecal water content, fecal fat content, fecal osmolality and electrolyte concentration, quantitative anaerobic fecal bacterial culture, partial thromboplastin time, prothrombin time, breath hydrogen concentration, urinary calcium, phosphorus and electrolyte concentrations, and abdominal radiographic examination with air contrast studies (pneumocolon) were examined. The four cats treated surgically were healthy and thriving and, in general, enteric function was similar to the controls. Bowel movements occurred only slightly more frequently with no significant differences in fecal volume or water content. Serum cobalamin concentrations were significantly higher in cats treated surgically. Fecal sodium concentrations were high and fecal potassium concentrations were low. Results of this study did not show any significant subclinical evidence of abnormal bowel function in cats after subtotal colectomy.     

Dysgenesis of the tubal system in an infertile mare karyotype 63,X:64,XY:65,XXY

A Thoroughbred mare, barren during three years at stud, unresponsive to therapy, and not palpably abnormal anatomically was found to have hypoplasia of the uterine tubes after excision at laparotomy. The cause was an unbalanced genotype. The mosaic karyotype, determined on a blood sample, was indispensible in diagnosis and the case extends the potential for cytogenetic prognostic procedures.     

Holding Power of Orthopedic Screws in Equine Third Metacarpal and Metatarsal Bones: Part II. Adult Horse Bone

Comparison was made of the holding power of 5.5 and 4.5 mm cortical orthopedic screws inserted into third metacarpal and metatarsal cadaver bones from 3- and 8-year-old horses. The tensile strength of these screws was tested mechanically. In nine comparative trials of these screws, 5.5 mm screws pulled out of bone in five trials at an average of 116.0 kg tensile force and broke in four trials at an average of 1383.2 kg. A 4.5 mm screw pulled out of bone at 834.5 kg in one trial, and screws broke at an average of 849.2 kg in eight trials. The larger 5.5 mm screw required a significantly greater (p = 0.022) pullout force than the mean force at 4.5 mm screw breakage. Fixation failure was due to screw breakage or bone shear, with 5.5 mm screws occasionally creating bone fragmentation during pullout. The average tensile breaking strengths of the 5.5 mm screws (1391.4 kg) and 4.5 mm screws (832.7 kg) determined mechanically were similar to forces at screw breakage during pullout testing in bone. Since the 5.5 mm screws have greater holding power and tensile strength than 4.5 mm screws, the use of the 5.5 mm screw in fracture repair in adult horses is recommended.     

Placement of Multiple Full Pins for External Fixation Technique and Results in Four Dogs

A technique using a third bar and guide clamp was developed to permit reduction and stabilization of distal limb fractures with full pins and two connecting bars, one on each side of the bone. The system uses only single Kirschner clamps. Four distal limb fractures were stabilized using this technique. Closed reduction was used in three dogs to avoid devitalization of fragments and avoid contamination of a closed fracture. The fracture site stability achieved with this configuration allowed early return to weight bearing and rapid bone healing.