Effect of harvesting and drying conditions on chlorophyll levels of soybean (Glycine max L. Merr)

Chlorophyll in soybean represents a downgrading factor for the crops. Five Brazilian cultivars were harvested between R(6) and R(8) stage of development (Fehr & Caviness scale) and dried at 25 degrees and 40 degrees C. The effect of maturity stages and two drying conditions after harvest were studied to achieve reduction of moisture and chlorophylls to acceptable levels. When seeds were dried at 25 degrees C, even harvesting at early stages of development such as R(6), the green pigments were almost degraded, and 16 ppm of chlorophyll were found at maximum, accompanied by loss of moisture. Moisture and chlorophyll declines as seed matures, but at intermediary stages (R(6)-R(7)), chlorophyll degrades first, so the rate of moisture loss should not be used to predict chlorophyll contents. At 40 degrees C, complete degradation of chlorophyll pigments is only achieved when seeds are swathed from R(7) stage up, otherwise the seed quality could be compromised. Slow drying allows almost complete removal of green pigments, even when seeds are swathed a few days before the physiological maturity stage.     

Using soil temperature and moisture to predict forest soil nitrogen mineralization

Due to the importance of N in forest productivity ecosystem and nutrient cycling research often includes measurement of soil N transformation rates as indices of potential availability and ecosystem losses of N. We examined the feasibility of using soil temperature and moisture content to predict soil N mineralization rates (Nmin) at the Coweeta Hydrologic Laboratory in the southern Appalachians. We conducted seasonal laboratory incubations of A and AB horizon soils from three sites with mixed-oak vegetation using temperature and moisture levels characteristic of the season in which the soils were collected. The incubations showed that temperature and temperature-moisture interactions significantly affected net soil Nmin. We used the laboratory data to generate equations relating net Nmin to soil temperature and moisture data. Using field-collected temperature and moisture data we then calculated Nmin on similar forest sites and compared predicted rates with in situ, closed-core Nmin measurements. The comparison showed that the in situ Nmin was greater than rates predicted from laboratory generated equations (slope =3.22; r²=0.89). Our study suggests that while climatic factors have a significant effect on soil Nmin, other factors also influence rates measured in the laboratory and in situ.     

Soil management for Alfisols in the semiarid tropics: erosion, enrichment ratios and runoff

Abstract. Continuous cultivation of soils of the semiarid tropics has led to significant land degradation. Soil erosion and nutrient loss caused by high runoff volumes have reduced crop yields and contributed to offsite damage. We compared a number of soil management practices (tillage, mulch and perennial/annual rotational based systems) for their potential to improve crop production and land resource protection in an Alfisol of the semiarid tropics of India. Runoff and soil erosion were monitored and surface soil and sediment were analysed for nitrogen and carbon to determine enrichment ratios. Amelioration of soils with organic additions (farmyard manure, rice straw) or rotating perennial pasture with annual crops increased soil carbon and nitrogen contents and reduced runoff, soil erosion and nutrient loss. Soil erosion totalled less than 7 t ha^–1, but enrichment ratios were often greater than 2 resulting in up to 27 kg N ha^–1 and 178 kg C ha^–1 being lost in sediment. Up to an extra 250 mm of water per year infiltrated the soil with organic additions and was available for crop water use or percolation to groundwater. The results show that there are good opportunities for reducing degradation and increasing productivity on farms.     

Effect of Temperature on Bio-Kinetic Coefficients in UASB Treatment of Municipal Wastewater

Upflow anaerobic sludge blanket (UASB)reactors were used to treat municipal wastewater attemperatures of 6, 11, 15, 20 and 32 °C and athydraulic retention times (HRTs) ranging from 48 to 3 h overan operational period of approximately 860 days. The Monodmodel was used to evaluate substrate utilization. TheArrhenius model was used to calculate the activationenergies from which temperature coefficients weredetermined. It was found that the maximum specific substrateutilization rate constant (k) decreased from 0.387 d^-1(at 32 °C) to 0.041 d^-1 (at 6 °C). Thedecay rate constant (k_d), yield coefficient (Y_g),half velocity constant (K_s) and maximum specific growthrate (μ_m ) were also impacted by temperature in theUASB treatment of municipal wastewater.     

Changes in penetration resistance of Ultisols from southern China as affected by shearing

Shear stresses and soil properties modified due to stress play an important role during formation of seals in a series of rainfall events and during tillage. The objectives of the study were to evaluate the effects of the penetrometer geometry on the penetration resistance as affected by shearing under different initial soil conditions and to use the information on soil strength to elucidate shearing process. Nine homogenous air-dried soils (<2 mm) were sprayed and stored so as to obtain equilibrium soil water contents. The moist soils were sheared by horizontal displacement of layers of soil particles/aggregates in between hands in one direction. The soil cores were prepared with comparable bulk density before the measurement of maximum penetration resistance (P_max) with a small flat tip and a cone tip penetrometers. At a wide range from 0.05 to 6.2 MPa, P_max was linearly correlated between the small flat tip and the cone tip penetrometers. The conversion ratio was higher under the saturation condition irrespective of the shearing effect. The penetrometer with the small flat tip was more sensitive for the weak soils. Shearing generally increased P_max in most cases, but it decreased P_max for some sandy soils under both saturated and unsaturated conditions and for a clayey soil under the saturated condition. The soil consisting of swelling clay exerted a decrease in P_max. Rearrangement and/or sliding of particles/aggregates and increase in soil suction during shearing were attributed to the increase in P_max. Increase in porosity due to the aggregation during shearing was ascribed to the decrease in P_max. In addition, it was shown that agricultural cultivation resulted in a reduction in soil strength.     

Aggregates and gel network structure of globin hydrolysates

A gel with excellent functional properties was prepared successfully using the hydrolysates of globin. In the present study, the structures of intermediate aggregates and gel network were observed directly with an electronic microscope. It was shown clearly that the intermediate aggregates were in a thin rod shape with a length of 130--140 nm, which was in good accordance with the results of the light scattering obtained in a previous study. The diameter of intermediate aggregates was 4--5 nm. Each unit of the intermediate aggregate was composed of beta-chain and peptide beta-1 in a ratio of 1:1. Its molecular weight was 26922 Da, and it had a diameter of 4.1 nm. The thin rod-shaped aggregates were formed with units through the hydrophobic interaction. The length of intermediate aggregate was >30--33 times the diameter. Furthermore, the cross-linked structure formed by peptide alpha-1 and the thin rod-shaped aggregates was also confirmed by the photography of the electronic microscope. These results supported the model proposed in previous papers as proper to depict exactly the formation and structure of the gel network of globin hydrolysates.     

Determination of anthocyanidins in berries and red wine by high-performance liquid chromatography

A high-performance liquid chromatographic (HPLC) method for the determination of anthocyanidins from berries and red wine is described. Delphinidin, cyanidin, petunidin, pelargonidin, peonidin, and malvidin contents of bilberry (Vaccinium myrtillus), black currant (Ribes nigrum), strawberry (Fragaria ananassa cv. Jonsok), and a Cabernet sauvignon (Vitis vinifera) red wine were determined. The aglycon forms of the anthocyanins present in the samples were revealed by acid hydrolysis. A reversed phase analytical column was employed to separate the anthocyanidins before identification by diode array detection. The suitability of the method was tested by determining the recovery (95-102% as aglycons and 69-104% from glycosides) for each anthocyanidin. Method repeatability was tested by charting the total aglycon content of two samples over a period of 14 analyses and determining the coefficients of variation (1.41% for bilberry and 2.56% for in-house reference material). The method developed proved thus to be effective for reliable determination of anthocyanidins from freeze-dried berry samples and red wine. The total anthocyanidin content of the tested samples was as follows: in-house reference material, 447 +/- 8 mg/100 g; strawberry, 23.8 +/- 0.4 mg/100 g; black currant, 135 +/- 3 mg/100 g; bilberry, 360 +/- 3 mg/100 g; and Cabernet sauvignon red wine, 26.1 +/- 0.1 mg/100 mL.     

Factors affecting the caffeine and polyphenol contents of black and green tea infusions.

The effects of product and preparation variables on the in-cup chemical composition of tea extracts is of interest because the appearance and taste characteristics and the possible health effects of a tea liquor arise from the chemical components extracted from the leaf during tea preparation. A comprehensive study was therefore undertaken to determine the contributions of product and preparation variables on the total soluble solids, caffeine, and polyphenol contents of tea extracts. The results of this study show that the variety, growing environment, manufacturing conditions, and grade (particle size) of the tea leaves each influence the tea leaf and final infusion compositions. In addition, the composition of the tea infusion was shown to be influenced by whether the tea was contained in a teabag and, if so, the size and material of construction of the bag. Finally, the preparation method, including the amounts of tea and water used, infusion time, and amount of agitation, was shown to be a major determinant of the component concentrations of tea beverages as consumed. An illustration of the variation introduced by these product and preparation factors is provided by comparing solids, caffeine, and polyphenol contents of green and black tea infusions when commercial products are prepared according to the instructions given on their packaging.     

Microbial community structure in forest soils treated with a fire retardant

The influence of a fire retardant (Firesorb, an acrylic–acrylamide copolymer) on the microbial community structure determined by phospholipid fatty acid (PLFA) analysis was examined under laboratory conditions using two different textured soils under pine forest. Firesorb was added to unheated and heated soil samples (350°C for 10 min followed by reinoculation, to mimic a forest fire) at three levels of application (none, usual and three times the usual levels), and measurements were made after 12 weeks of incubation. The relative importance of the three factors considered on the PLFA profiles was as follows: soil heating ≫ soil texture ≈ Firesorb treatment. In the unheated soils, Firesorb had a larger effect than soil texture, while the opposite was found in the heated soils. Soil heating reduced the total PLFAs, while Firesorb tended to increase them in both the unheated and heated soils. Soil heating decreased the PLFAs indicative of gram-positive (G⁺) bacteria and tended to increase the fatty acids associated with gram-negative (G⁻) bacteria and, to a lesser extent, the PLFA 18:2ω6, considered to be predominantly of fungal origin. Firesorb treatment decreased the G⁻/G⁺ bacteria ratio in the heated soils but tended to increase it in the unheated soils, the effect being dose dependent.     

Interaction between protein, phytate, and microbial phytase. In vitro studies

The interaction between protein and phytate was investigated in vitro using proteins extracted from five common feedstuffs and from casein. The appearance of naturally present soluble protein-phytate complexes in the feedstuffs, the formation of complexes at different pHs, and the degradation of these complexes by pepsin and/or phytase were studied. Complexes of soluble proteins and phytate in the extracts appeared in small amounts only, with the possible exception of rice pollards. Most proteins dissolved almost completely at pH 2, but not after addition of phytate. Phytase prevented precipitation of protein with phytate. Pepsin could release protein from a precipitate, but the rate of release was increased by phytase. Protein was released faster from a protein-phytate complex when phytase was added, but phytase did not hydrolyze protein. Protein was released from the complex and degraded when both pepsin and phytase were added. It appears that protein-phytate complexes are mainly formed at low pH, as occurs in the stomach of animals. Phytase prevented the formation of the complexes and aided in dissolving them at a faster rate. This might positively affect protein digestibility in animals.