Importance of rubberwood in wood export of Malaysia and Thailand

We examined the contribution of rubberwood to the timber export markets of Malaysia and Thailand. In Malaysia, rubberwood has grown from 26% of total exported wood products in 1998 to 35% in 2007. A high proportion of furniture products (80%) is rubberwood, whereas the contribution of rubberwood to other wooden products is less than 20%. Only 10% of sawn timber and logs is rubberwood. In Thailand, rubberwood contributes to around 60% of total exported wood products, arising from a high share of not only furniture products (70%) but also other wood products (around 50%) and sawn timber and logs, which have increased in share from 40% in 1998 to 79% in 2007. We conclude that the high proportion of rubberwood products in the wood export markets of these two countries is a result of: (1) scarcity of raw wood materials because of strict controls on the logging of natural forests; and (2) governmental support to rubberwood production, including financial support to rubber planters and technical assistance to downstream timber processors.     

Seasonal variations in the incidence of pine wilt and infestation by its vector, Monochamus alternatus, near the northern limit of the disease in Japan

During the last few decades, pine wilt disease has spread to cool-climate regions in Japan and, more recently, the potential risk of it spreading into the European midwest has also become a concern. In a coastal pine stand (84.7?ha) in Akita, near the northern limit of pine wilt disease in Japan, we investigated seasonal variations in the incidence of damage caused by the disease to trees and oviposition by the disease’s insect vector, Monochamus alternatus, during a two-year period. Foliage discoloration occurred throughout each year, and its seasonal variation showed a bimodal pattern in Pinus thunbergii (a higher peak in May–June and a smaller peak in October) and a clear peak in June in P. densiflora, which differed from the patterns in seasonal variation seen for warm-climate regions. Oviposition scars by M. alternatus were found in 40–45% of the trees damaged each year. The percentage of trees that had oviposition scars was higher in P. thunbergii than in P. densiflora. This appeared to reflect the difference in seasonal discoloration pattern between the two species. Analysis of the oviposition risk showed that trees that exhibited discoloration starting between July and October had a significantly higher risk or significantly higher oviposition scar densities, particularly for those that became discolored between August and September (2.5–14.6-fold higher risk than during other months). Oviposition scar densities per damaged tree were similar within the period of higher oviposition risk. Considering both oviposition risks and scar densities, we concluded that trees with discoloration that become apparent between July and October are important targets for preventing the spread of pine wilt disease in Akita.     

Genetic diversity of Pinus densiflora pollen flowing over fragmented populations during a mating season

We attempted to evaluate the genetic diversity of long-distance transported pollen flowing over fragmented Pinus densiflora populations during a mating season. A P.?densiflora clonal seed orchard, which was located in a rural area where many fragmented populations exist, was selected for pollen capture. Immigrant pollen captured by three clones having different flowering times was regarded as the pollen flowing over fragmented populations during a mating season. The genetic diversity (H _e) values of the immigrant pollen captured by the three clones were high (H _e?>?0.894). The correlation of paternity (r _p) values of the seeds having immigrant parent generated from the three clones were calculated to be negative. From these parameters, the pollen cloud is considered to have maintained high genetic diversity during the mating season. The genetic composition of the pollen cloud showed slight variation. The pollen captured by different trees (i.e., clonal ramets of the three clones) was significantly different based on analysis of molecular variance. Especially, the pollen pools captured by trees planted in the western side of the orchard were significantly different from the gene pool of the surrounding populations. Factors affecting this differentiation could be that the donors of the pollen transported to the orchard vary with time, as well as nonuniform dispersal of the pollen. From these results, the pollen flowing over fragmented P.?densiflora populations is considered to have high genetic diversity, compensating to some extent for fragmentation.     

Bending creep behavior of hot-pressed wood under cyclic moisture change conditions

This study examined the bending creep behavior of hot-pressed wood during cyclic moisture changes. Sugi (Cryptomerica japonica D. Don) specimens were pressed in the radial direction under six combinations of nominal compressive strain (33% and 50%) and press temperatures (140°C, 170°C, 200°C). Creep tests were conducted at 20°C with three cyclic relative humidity changes between 65% and 95% under 25% of short-breaking stress. The effect of moisture content (MC) change on elastic compliance and mechanosorptive (MS) compliance was investigated. The relation between MS compliance and thickness swelling was studied. The results indicated that total compliance increased over the history of cyclic moisture changes; and its behavior was closely related to the changes in MC and thickness swelling. The total compliance increased during adsorption and decreased during desorption. Elastic compliance increased linearly with MC and was dependent on press temperature and compression. With increasing MC change, MS compliance increased during adsorption and decreased during desorption. The first adsorption led to greater MS compliance than did the subsequent adsorption with the same amount of MC change. In general, the elastic parameterK _E and the MS parameterK _Mincreased with compression and decreased as the press temperature increased. The MS parameterK _M was apparently greater than the elastic parameterK _E. The MS parameterK _M increased with swelling coefficient K_SW of the hot-pressed specimen during adsorption and decreased with an increasing shrinkage coefficientK _SH during desorption.     

Feeding activities of Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe) as affected by moisture content of wood

The relationship between the moisture content (MC) of wood blocks and the feeding activities of two Japanese subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), was investigated with two choice tests. When three wood blocks with low MC (6%–12%), middle MC (79%–103%), and high MC (140%–182%) were exposed to workers of C. formosanus and R. speratus in a choice test, the feeding preferences were found in the middle MC blocks for C. formosanus, and the middle and high MC blocks for R. speratus, although wood blocks of low MC were also attacked. In a second choice test, wood blocks consisting of five pieces with water-impregnated (MC: 133%–191%) top, middle, or bottom piece were exposed to workers of both species. Higher consumptions were generally obtained in water-impregnated wood pieces and bottom pieces.     

Geographical and Temporal Variations of Chemical Constituents in Winter Precipitation Collected in the Areas along the Coast of the Sea of Japan

The geographical and temporal variations of chemical constituents in winter precipitation collected in the areas along the coast of the Sea of Japan (AASJ) were discussed by analyzing the data obtained in the 1st and 2nd National Acid Deposition Survey by Japan Environmental Laboratories Association. In western Tohoku (WT) and Hokuriku (HR) areas in AASJ, in spite of large amounts of precipitation in winter, concentrations of non sea salt (nss-)SO₄ ^2? are not as low as the other areas, and nss-Ca²⁺ in these areas is lower than the other areas. As a result, H⁺ concentrations of precipitation in these areas are somewhat higher than other areas. From the temporal analysis of daily sampled data and back trajectory analysis of air mass, it was found that the concentrations of nss-SO₄ ^2?, NO₃ ^?, NH₄ ⁺ and nss-Ca²⁺ are correlatively varied when air mass come from the Asian Continent, showing higher concentrations at the western sites in AASJ and depending on the meteorological conditions such as the direction of in flow air mass.     

Low pH and aluminum tolerance of Bradyrhizobium strains isolated from acid soils in Indonesia

Sixty-seven strains of Bradyrhizobium isolated from soybean plants growing on acid soils in West Java and Sumatra, Indonesia, were examined for the effect of the pH and aluminum concentration on their growth in nutrient media, compared with 61 strains of Bradyrhizobium from soils in Japan. The results in this study indicated that the indigenous population of Bradyrhizobium in the soils of Indonesia showed a large difference in acid- and Al-tolerance from that of Japan. Eighty-five and 48% of the isolates from Japanese soils and Indonesian soils, respectively, were unable to grow in YEM broth at pH below 4.5. The acid-tolerance was correlated with AI-tolerance of the isolates on YEM agar plates at pH 4.4. Seventy-five percent of the isolates that grew in YEM broth at pH 4.5 were also resistant to 400 µM Al on the YEM plates. Acetylene reduction assay of the root nodules revealed that 3 of the acid- and Al-tolerant isolates from Indonesian soils showed a significantly high nitrogen fixation activity.     

Triterpenoids isolated from Zizyphus jujuba inhibit foam cell formation in macrophages

Because foam cell formation in macrophages is believed to play an essential role in the progression of early atherosclerotic lesions in vivo, prevention of foam cell formation is considered to be one of the major targets for the treatment of atherosclerosis. The present study examined the inhibitory effect of 50 crude plant extracts on foam cell formation. Among those crude extracts, Zizyphi Fructus (ZF) and Zizyphi Semen (ZS) extracts significantly inhibited the foam cell formation induced by acetylated LDL. Furthermore, triterpenoids such as oleanonic acid, pomolic acid, and pomonic acid were the major active compounds, and triterpenoids containing a carboxylic acid at C-28 play an important role in the inhibitory effect on foam cell formation in human macrophages. These data suggest that triterpenoids in Zizyphus jujuba , the plant source of ZF and ZS, may therefore be useful for the prevention of atherosclerosis.     

Detection and quantification of protein residues in food grade amino acids and nucleic acids using a dot-blot fluorescent staining method

Food allergies represent an important health problem in industrialized countries, such that detection and quantitative analysis of the protein considered to be the main allergen is crucial. A dot-blot fluorescent staining method for the detection and quantitative analysis of protein residues in food grade amino acids and nucleic acids is presented. This method combines fluorescence staining with dot-blotting onto PVDF membrane. Several standard proteins, such as bovine serum albumin (66 kDa), lysozyme (14 kDa), ubiquitin (8.6 kDa), bovine insulin (5.7 kDa), and oxidized insulin B chain (3.5 kDa), were detectable at 0.1 ppm using SYPRO Ruby blot stain. Twenty-five different amino acids and two different nucleic acids of food grade were analyzed using this method combined with an internal standard addition method using BSA as an internal standard. All amino acids and nucleic acids were dissolved in 3.6% aqueous HCl and dot-blotted onto PVDF membrane before a large amount of amino acids and nucleic acid were removed. Protein residues and the internal standard protein immobilized on the membrane were stained using SYPRO ruby blot stain. The internal standard in all samples was detectable at 0.1 ppm. Samples were dissolved at 120 or 70 mg/mL, according to their solubility under acidic conditions. The detection limit of protein residues per weight was 0.8-1.4 ppm in amino acids and nucleic acids; residual protein was not detected in any sample.