Socio-economic significance of reed forests in a rural community: A case study from the greater Sylhet Region of Bangladesh

The reed forests that are the subject of this study are scattered over five thanas of the Sunamganj and Sylhet Districts of the Sylhet Division of Bangladesh. Their total area is 23,590 ha and they have great ecological, economic, commercial and socio-economic importance due to the diversified resources they supply. However, the forests are commonly encroached on by local people who are perceived to be seriously depleting the resource. This paper deals with the socio-economic status of the people residing near these reed forests, and examines their dependency on the resources provided by the reed forests. A socio-economic survey, participatory rural appraisal and interviews were used to obtain baseline data of the reed forest resource and the local communities. The study reveals that the communities in the study region have higher income than other areas of Bangladesh. Most survey respondents have other occupations in addition to farming. The literacy rate is 28.8%. Among the illiterate, 68% engage in collecting reeds. Although the Forest Department has a management plan for sustainable use of the reed forests, encroachers receive backing from political leaders and local elites, so their eviction is difficult. In order to achieve long-term productivity and sustainability from the reed forests, this study recommends a strategy of developing an integrated joint management plan between the Forest Department and the local people.     

Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber

This study was carried out to investigate the possibility of calibrating a prediction model for the moisture content and density distribution of Scots pine (Pinus sylvestris) using microwave sensors. The material was initially of green moisture content and was thereafter dried in several steps to zero moisture content. At each step, all the pieces were weighed, scanned with a microwave sensor (Satimo 9,4GHz), and computed tomography (CT)-scanned with a medical CT scanner (Siemens Somatom AR.T.). The output variables from the microwave sensor were used as predictors, and CT images that correlated with known moisture content were used as response variables. Multivariate models to predict average moisture content and density were calibrated using the partial least squares (PLS) regression. The models for average moisture content and density were applied at the pixel level, and the distribution was visualized. The results show that it is possible to predict both moisture content distribution and density distribution with high accuracy using microwave sensors.     

<Emphasis Type="Italic">Pinus halepensis</Emphasis> somatic embryogenesis is affected by the physical and chemical conditions at the initial stages of the process

Pinus halepensis has been described as a drought-tolerant species with high plasticity to growth in different environments. Its eco-physiological characteristics could facilitate the use of this species in large afforestations in the future scenery of climate change. Somatic embryogenesis is a biotechnological tool with potential for large-scale clonal propagation. In order to establish an improved regeneration protocol for Pinus halepensis, the effects of different temperatures (18, 23, and 28 °C) and water availability conditions (2, 3, and 4 g L^?1 Gelrite^®), during initiation of embryonal masses on the rate of initiation, proliferation, maturation, and the number of embryos developed, were evaluated. It was found that environmental conditions during the initiation stage of Pinus halepensis somatic embryogenesis influence the success of initiation and proliferation. In contrast, there was no effect of these conditions on the maturation rates and the number of somatic embryos. Somatic embryos were obtained in all treatments tested, indicating that plants can be produced from extreme conditions of induction, such as high temperatures (28 °C) and low water availability conditions (4 g L^?1).     

Establishment of a high-frequency regeneration system in <Emphasis Type="Italic">Cerasus humilis</Emphasis>, an important economic shrub

Cerasus humilis is a species of small, perennial, drought-resistant and multipurpose deciduous shrub grown in arid and semi-arid conditions in northern China. In this study, an efficient protocol for the rapid micropropagation of C. humilis has been standardized using stem and/or leaf explants. Direct multiple shoot induction was observed when the stem explants were cultured on Murashige and Skoog (MS) medium supplemented with different plant growth regulators. The highest shoot induction was obtained when stem explants from adult trees were cultured on MS medium supplemented with 2.0 mg L^?1 6-benzyladenine (6-BA) and 0.9 mg L^?1 α-naphthaleneacetic acid (NAA). The leaf and stem explants cultured on MS medium with 1.0 mg L^?1 6-BA and 0.6 mg L^?1 NAA, and 0.5 mg L^?1 6-BA and 0.8 mg L^?1 NAA, respectively, produced the highest induction frequency of callus. Maximum proliferation of callus was observed on MS medium containing a combination of 0.5 mg L^?1 6-BA with 0.6 mg L^?1 2,4-dichlorophenoxyacetic acid (2,4-d). Optimal shoots differentiated from callus were obtained on MS medium supplemented with 5.0mg L^?1 6-BA and 0.9 mg L^?1 NAA. In vitro rooting was achieved on half-strength (1/2) MS medium containing 0.5 mg L^?1 NAA. Rooted plantlets were hardened under control conditions and successfully acclimatized under field conditions.     

Chemical composition,antioxidant and antibacterial activities of extracts from <Emphasis Type="Italic">Schinus molle</Emphasis> wood branch growing in Egypt

In the present work, for the first time, the chemical components of essential oils (EOs) and extracts from wood branch (WB) resulted from the tree pruning wastes of Schinus molle L. grown in Egypt were evaluated for their antioxidant and antibacterial activities. EOs, methanol (ME), dichloromethane (DCME) and water (WE) extracts as antioxidant and antibacterial activities were measured. Total phenolic and flavonoid contents as well as analysis of extracts by gas chromatography–mass spectrometry (GC–MS) were reported. The major components in EOs were α-elemol, β-pinene, and α-phellandrene, in ME were 6-(4-chlorophenyl)-3-cyano-4-(N-benzylpiperazino)-2H-pyran-2-one, and 2-naphthalene methanol, decahydro-α,α,4a-trimethyl-8-methylene, in DCME were 12-methyl-E,E-3,13-octadecadien-1-ol, and 1,2-benzenedicarboxylic acid, dioctyl ester, and in WE were β-eudesmol, and (Z,Z,Z)-9,12,15-octadecatrienoic acid, 2,3-dihydroxypropyl ester. The highest total antioxidant activity was found with EOs (90 ± 1.23 %) and WE (86.30 ± 1.40 %). The lowest IC₅₀ values of 13.11 ± 3.00, and 12.66 ± 2.15 μg/mL were found with WE and EOs, respectively. EOs and WE were observed to have good antibacterial activity against Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Escherichia coli, Sarcina lutea, Pseudomonas aeruginosa, and Micrococcus luteus. In conclusion, the Schinus molle L. WB EOs and extracts might, indeed, be used as a potential source for pharmaceutical or food industries.     

Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.     

Criterion for estimating humidity control capacity of materials in a room

As a measure of estimating humidity control capacity of materials in an airtight room under sinusoidal temperature variation, we used the Cb value, which is the ratio of the range of variation in relative humidity in a steel box lined with the material of interest to the range in an empty steel box. In order to clarify the factors that affect the Cb value, we focused on both the temperature variation rate and the area that is lined in the box. It was found that changing the rate of temperature variation over one period strongly affected the Cb value, although the amplitude of temperature variation did not. We further noticed that the difference between the time when peak temperature was reached and the time when peak absolute humidity was reached (peak time difference), was found to be useful for estimating the humidity control capacity of materials. Knowing the difference between the phase when peak temperature was reached and the phase when peak absolute humidity was reached (phase angle difference) was also useful. Because the Cb value was affected by both the variation period and the lined area in the box, we can draw a contour diagram of the period and the lined area for materials to give an overview of the humidity control capacity of a material. The materials of primary interest in this study were Japanese cedar and porous ceramics.     

Effects of different ecological and silvicultural factors on beetle catches in the Turkish fir (<Emphasis Type="Italic">Abies bornmülleriana</Emphasis> Mattf.) ecosystems

To study the bark beetle attacks on Turkish fir stands and to determine the principle site and stand factors influencing beetle attacks, trap log method was used in the Western Black Sea Region of Turkey. The study was carried out in ten different locations prior to flying time in February 2003. On each experimental plot, three healthy fir trees with 30–50 cm diameter and 200 m apart were cut down with a chainsaw. From each sampling tree, needles were sub-sampled for determination of specific leaf-area and macro-nutrient concentrations. In addition, on each experimental plot, crown closure, basal-area, and stand density were measured. To determine the bulk density and nutrient concentrations of the soil, samples were taken around trees on each plot. The relationship between measured stand variables, the number of beetle species and beetle populations were evaluated using correlation and stepwise multiple regression procedure. Eight different species belonging to four different families from Coleoptera were identified in examining the trap logs. Six of these eight species (Pissodes piceae Illig., Pissodes notatus Fabr., Cryphalus piceae Ratz., Pityophthorus pityographus Ratz., Xyloterus lineatus Oliv., Pityokteines curvidens Germ.) were identified as harmful beetles (HB). The other two (Thanasimus formicarius L. and Rhizophagus dispar Payk.) were identified as predator species. The analysis showed that the total number of HB increased as the site’s slope and needle specific leaf area increased. However, as needle N concentrations increased, HB population decreased. Increased Ca concentration in fir needle reduced total insect attack.