Evaluation of palygorskite for remediation of Cd-polluted soil with different water conditions

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

     

Soil nitrogen availability alters rhizodeposition carbon flux into the soil microbial community

Purpose

Soil microorganisms are important in the cycling of plant nutrients. Soil microbial biomass, community structure, and activity are mainly affected by carbon substrate and nutrient availability. The objective was to test if both the overall soil microbial community structure and the community-utilizing plant-derived carbon entering the soil as rhizodeposition were affected by soil carbon (C) and nitrogen (N) availability.

Materials and methods

A ¹³C-CO₂ steady-state labeling experiment was conducted in a ryegrass system. Four soil treatments were established: control, amendment with carboxymethyl cellulose (CMC), amendment with ammonium nitrate (NF), combined CMC and NF. Soil phospholipid fatty acid (PLFA) and ¹³C labeling PLFA were extracted and detected by isotope ratio mass spectrometer.

Results and discussion

The combined CMC and NF treatment with appropriate C/N ratio (20) significantly enhanced soil microbial biomass C and N, but resulted in lower soil inorganic N concentrations. There was no significant difference in soil PLFA profile pattern between different treatments. In contrast, most of the ¹³C was distributed into PLFAs 18:2ω6,9c, 18:1ω7c, and 18:1ω9c, indicative of fungi and gram-negative bacteria. The inorganic-only treatment was distinct in ¹³C PLFA pattern from the other treatments in the first period of labeling. Factor loadings of individual PLFAs confirmed that gram-positive bacteria had relatively greater plant-derived C contents in the inorganic-only treatment, but fungi were more enriched in the other treatments.

Conclusions

Amendments with CMC can improve N transformation processes, and the ryegrass rhizodeposition carbon flux into the soil microbial community is strongly modified by soil N availability.

     

Effects of temperature on soil organic carbon fractions contents,aggregate stability and structural characteristics of humic substances in a Mollisol

Purpose

Under a global warming scenario, understanding the response of soil organic carbon fractions and aggregate stability to temperature increases is important not only for better understanding and maintaining relevant ecosystem services like soil fertility and crop productivity, but also for understanding key environmental processes intimately related with the maintenance of other regulatory ecosystem services like global climate change mitigation through carbon sequestration. An increase in temperature would accelerate the mineralization of soil organic carbon. However, the properties of organic carbon remained in soil after mineralization is not well known.

Materials and methods

Mollisol was collected at 0–20-cm depth from maize (Zea mays L.) field in Northeast China. A 180-day incubation experiment was conducted at three different temperatures (10, 30, and 50 °C) under constant soil moisture (60 % water holding capacity). Soil samples were assayed for total organic carbon (TOC), water-soluble organic carbon (WSOC), easily oxidizable organic carbon (EOC), humic fractions carbon, aggregate-associated carbon, and water stability of aggregates. Elemental analysis and solid-state ¹³C nuclear magnetic resonance spectroscopy were used to characterize humic acid and humin fractions.

Results and discussion

The contents of soil TOC, EOC, humic fractions carbon, and aggregate-associated carbon decreased with the increase in temperature. The proportion of 2–0.25-mm macroaggregate and the mean weight diameter (MWD) of aggregates also decreased. The C, H, N, S, alkyl C, and O-alkyl C contents of humic acid and humin decreased, whereas the O, aromatic C, and carbonyl C contents increased. The H/C, aliphatic C/aromatic C, and O-alkyl C/aromatic C ratios in humic acid and humin fractions decreased.

Conclusions

The increase in temperature has a negative impact on soil organic carbon content, soil aggregation, and aggregate stability. Moreover, humic acid and humin molecules become less aliphatic and more decomposed with the increase in temperature.

     

Effects of ambient gaseous pollutants on photosynthesis,growth, yield and grain quality of selected crops grown at different sites varying in pollution levels

In recent decades, ambient gaseous pollution has increased due to anthropogenic activities worldwide. The studies to evaluate the adverse effects of ambient pollutants on commonly grown food crops are still limited, especially in Asian countries like Pakistan. The present study was conducted to measure the ambient pollutants in different sites of Faisalabad and their impact on growth and yield of wheat, mung bean and peas. Plants were grown in pots and placed at three sites named as control (Wire house of Government College University, Faisalabad), low pollution (LP) (Farm Area of Ayub Agricultural Research Institute) and high pollution (HP) (GT Chowk, Faisalabad) sites. Results showed that ambient ozone (O₃) concentration was highest at HP site followed by LP site and was below AOT40 in control site. Ambient pollutants caused foliar injury in crops and decreased plant height, leaf area, biomass and grain yield. Pollutants caused a reduction in photosynthetic pigments, stomatal conductance and net photosynthetic rate and grain protein contents in all three crops. In conclusion, the ambient O₃ level was highest at HP site, this current O₃ level and other pollutants decreased the growth and yield of important food crops.     

Atmospheric Mercury Fluxes in a Southern Boreal Forest and Wetland

Total gaseous mercury (TGM) fluxes from the forest floor and a boreal wetland were measured by a flux chamber technique coupled with an automatic mercury vapour analyser. The fluxes were measured at three sampling sites in southern Finland, 61°14′ N, 25°04′ E in summer 2007, with additionally in situ TGM concentrations in the air at one of the sites and mercury bulk deposition at another. Most of the flux data were collected during the daytime. At one of the sites, diurnal flux behaviour was studied, and a clear cycle with an afternoon maximum and a night minimum was observed. The highest emissions (up to 3.5 ng m⁻² h⁻¹) were observed at the forest floor site having a moss and grass cover. At the wetland and litter-rich forest floor sites, the emissions were below 1 ng m⁻² h⁻¹ and sometimes negative (down to −1.0 ng m⁻² h⁻¹), indicating mercury uptake. The measured average fluxes in August were 0.9 ± 1.1 and 0.2 ± 0.3 ng m⁻² h⁻¹ for the forest floor sites and wetland sites, respectively. The flux data were compared with the mercury bulk deposition, which proved to be of the same magnitude, but opposite in sign. At the mossy forest floor site, the extrapolated TGM emissions were 130% of the Hg deposition in August 2007. Comparison with other studies showed that the fluxes in background areas are relatively uniform, regardless of measurement site location and method used. Airborne TGM remained at the background level during the study, with an average value of 1.3 ± 0.2 ng m⁻³; it frequently showed a diurnal cycle pattern.     

Interactive effects of Cd and PAHs on contaminants removal from co-contaminated soil planted with hyperaccumulator plant <Emphasis Type="Italic">Sedum alfredii</Emphasis>

Purpose  

Soil contamination by multiple organic and inorganic contaminants is common but its remediation by hyperaccumulator plants is rarely reported. The growth of a cadmium (Cd) hyperaccumulator Sedum alfredii and removal of contaminants from Cd and polycyclic aromatic hydrocarbons (PAHs) co-contaminated soil were reported in this study.     

Performance and Kinetic Study on Bioremediation of Diazo Dye (Reactive Black 5) in Wastewater Using Spent GAC–Biofilm Sequencing Batch Reactor

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k ₂) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.     

Zinc exposure has differential effects on uptake and metabolism of sulfur and nitrogen in Chinese cabbage

Zinc (Zn) is a plant nutrient; however, at elevated levels it rapidly becomes phytotoxic. In order to obtain insight into the physiological background of its toxicity, the impact of elevated Zn²⁺ concentrations (1 to 10 μM) in the root environment on physiological functioning of Chinese cabbage was studied. Exposure of Chinese cabbage (Brassica pekinensis) to elevated Zn²⁺ concentrations (≥ 5 μM) in the root environment resulted in leaf chlorosis and decreased biomass production. The Zn concentrations of the root and shoot increased with the Zn²⁺ concentration up to 68‐fold and 14‐fold, respectively, at 10 μM compared to the control. The concentrations of the other mineral nutrients of the shoot were hardly affected by elevated Zn²⁺ exposure, although in the root both the Cu and Fe concentrations were increased at ≥ 5 µM, whereas the Mn concentration was decreased and the Ca concentration strongly decreased at 10 µM Zn²⁺. The uptake and metabolism of sulfur and nitrogen were differentially affected at ≥ 5 µM Zn²⁺. Zn²⁺ exposure resulted in an increase of sulfate uptake and the activity of the sulfate transporters in the root, and in enhanced total sulfur concentration of the shoot, which could be ascribed partially to an accumulation of sulfate. Moreover, Zn²⁺ exposure resulted in an up to 6.5‐fold increase in water‐soluble non‐protein thiol (and cysteine) concentration of the root. However, nitrate uptake by the root and the nitrate and total nitrogen concentrations of the shoot were decreased upon Zn²⁺ exposure, demonstrating the absence of a mutual regulation of the uptake and metabolism of sulfur and nitrogen at toxic Zn levels. Evidently, elevated Zn²⁺ concentrations in the root environment did not only disturb the uptake, distribution and assimilation of sulfate, it also affected the uptake and metabolism of nitrate in Chinese cabbage.     

Maintaining Genetic Resources of Peach Palm (<Emphasis Type="Italic">Bactris gasipaes</Emphasis> Kunth): The Role of Seed Migration and Swidden-fallow Management in Northeastern Peru

Knowledge of the effects of farmer practices on population genetic parameters of peach palm (Bactris gasipaes Kunth) is relevant to the improvement and conservation of the palm’s genetic resources. Microsatellite markers were used to assess genetic diversity and population structure of peach palm in swidden-fallow agroforestry systems in northeastern Peru. The study covered eight communities, comprising two study areas 160 km apart – one occupied by indigenous Amerindians and the other by mixed race campesinos. Simultaneous analysis of an ex situ peach palm germplasm collection provided a means to compare population genetic parameters. Farmers who were surveyed on seed selection practices for peach palm reported that an average of only four palms (4.3 for campesino and 1.5 for indigenous populations) were used to provide seed for the establishment of the forest gardens sampled. As expected, inbreeding coefficients observed within communities were relatively high (f = 0.105 − 0.210), however, observed heterozygosities within communities were also high (0.625–0.741). A metapopulation approach was used to describe migration within and among regions, implying a hierarchical structure of gene flow which maintains relatively high levels of genetic diversity. Seed migration was found to occur over longer distances (≤600 km) and at a higher frequency (46% of palms sampled) in the indigenous study area, and a proportionally greater number of alleles was found (49 vs. 43 over three loci) with twice as many private alleles occurring only in the indigenous populations. The farmers’ practice of preserving remnant palms through successive swidden generations may have contributed to the maintenance of alleles by reducing the severity of founder effects. Although the campesino study area exhibited a significant (20% of the variation; p < 0.01) isolation-by-distance relationship across 35 km distance, in general, both study populations had relatively limited genetic structure (θ = 0.012–0.03), which is believed to have resulted from the exchange of seeds over long distances and periods of time.     

Measurement of genetic dissimilarity in fieldpea (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.) genotypes using RAPD markers

The present investigation was carried out on fifteen germplasm lines of Pisum sativum L. were used for characterization using Randomly Amplified Polymorphic DNA (RAPD) markers. While 12 random primers were taken, out of them 11 primers gave amplification. These primers gave a total of 133 bands out of which 106 were polymorphic. Genetic similarities of the RAPD profiles were estimated by using Jaccard’s coefficient with NTSYSpc 2.0 software. The similarity index values ranged from 0.263 to 0.793 indicating the presence of enormous genetic diversity at molecular level. A dendrogram generated by cluster analysis divided fifteen fieldpea genotypes into two Groups A and B. Major Group A have five genotypes and major Group B have nine genotypes.