Simulation of drainage water quality with DRAINMOD

The design and management of drainage systems should consider impacts on drainage water quality and receiving streams, as well as on agricultural productivity. Two simulation models that are being developed to predict these impacts are briefly described. DRAINMOD-N uses hydrologic predictions by DRAINMOD, including daily soil water fluxes, in numerical solutions to the advective-dispersive-reactive (ADR) equation to describe movement and fate of NO₃-N in shallow water table soils. DRAINMOD- CREAMS links DRAINMOD hydrology with submodels in CREAMS to predict effects of drainage treatment and controlled drainage losses of sediment and agricultural chemicals via surface runoff. The models were applied to analyze effects of drainage intensity on a Portsmouth sandy loam in eastern North Carolina. Depending on surface depressional storage, agricultural production objectives could be satisfied with drain spacings of 40 m or less. Predicted effects of drainage design and management on NO₃-N losses were substantial. Increasing drain spacing from 20 m to 40 m reduced predicted NO₃-N losses by over 45% for both good and poor surface drainage. Controlled drainage further decreases NO₃-N losses. For example, predicted average annual NO₃-N losses for a 30 m spacing were reduced 50% by controlled drainage. Splitting the application of nitrogen fertilizer, so that 100 kg/ha is applied at planting and 50 kg/ha is applied 37 days later, reduced average predicted NO₃-N losses but by only 5 to 6%. This practice was more effective in years when heavy rainfall occurred directly after planting. In contrast to effects on NO₃-N losses, reducing drainage intensity by increasing drain spacing or use of controlled drainage increased predicted losses of sediment and phosphorus (P). These losses were small for relatively flat conditions (0.2% slope), but may be large for even moderate slopes. For example, predicted sediment losses for a 2% slope exceeded 8000 kg/ha for a poorly drained condition (drain spacing of 100 m), but were reduced to 2100 kg/ha for a 20 m spacing. Agricultural production and water quality goals are sometimes in conflict. Our results indicate that simulation modeling can be used to examine the benefits of alternative designs and management strategies, from both production and environmental points-of-view. The utility of this methodology places additional emphasis on the need for field experiments to test the validity of the models over a range of soil, site and climatological conditions.     

Antimycotic Screening of 58 Malaysian Plants against Plant Pathogens

Ethanolic extracts of 58 Malaysian plants belonging to 24 different families were screened for antifungal activity against seven plant pathogens using the filter paper disc diffusion technique. Two varieties of Piper betle, showed strong activity against all the pathogens tested (Colletotrichum capsici, Fusarium pallidoroseum, Botryodiplodia theobromae, Alternaria alternata, Penicillium citrinum, Phomopsis caricae-papayae and Aspergillus niger), with inhibition diameters significantly (P<0·01) bigger than 2·5 mg ml⁻¹ prochloraz or 10 mg ml⁻¹ clotrimazole. The minimum inhibitory concentrations of the ethanolic extracts of P. betle against these plant pathogens ranged between 0·01 mg ml⁻¹ and 1 mg ml⁻¹. Thirty-four other plants (Kucing gala, Limau batik, Bertholletia excelsa, Bixa orellana, Caesalpinia pulcherrima, Cerbera odollam (fruits and leaves), Colocasia gigantea, Curcuma domestica, Curcuma manga, Derris eliptica, Elephantopus scaber, Eleusine indica, Eugenia polyantha, Euphorbia hirta, Euphorbia tirucalli, Gardenia florida, Hedyotis auricularia, Hibiscus rosa-sinensis, Juniperus chinensis (three varieties), Lawsonia inermis, Lecythis ollaria, Mentha arvensis, Mimusops elengi, Ocimum sanctum, Phyllanthus niruri, Piper nigrum, Piperomia pellucida, Pedilanthus tithymaloides, Polygonum minus, Spondias dulcis, Solanum nigrum, Tinospora tuberculata) showed selective antifungal activity, while 21 species were inactive.     

Effect of transferring lignocellulose-degrading bacteria from termite to rumen fluid of sheep on in vitro gas production,fermentation parameters,microbial populations and enzyme activity

The digestive tract of termite(Microcerotermes diversus) contains a variety of lignocellulose-degrading bacteria with exocellulases enzyme activity, not found in the rumen, which could potentially improve fiber degradation in the rumen. The objectives of the current study were to determine the effect of inoculation of rumen fluid(RF) with three species of bacteria isolated from termite digestive tract, Bacillus licheniformis, Ochrobactrum intermedium, and Microbacterium paludicola, on in vitro gas production(IVGP), fermentation parameters, nutrient disappearance, microbial populations, and hydrolytic enzyme activities with fibrous wheat straw(WS) and date leaf(DL) as incubation substrate. Inoculation of RF with either of three termite bacteria increased(P0.05) ammonia-N concentration compared with the control group(free of termite gut bacteria). Termite bacteria inoculation had no effect(P0.05) on gas production characteristics, dry matter, organic matter and neutral detergent fiber disappearance, pH, and concentration and composition of volatile fatty acids. Population of proteolytic bacteria and protozoa, but not cellulolytic bacteria, were increased(P0.05) when RF was inoculated with termite bacteria with both WS and DL substrates. Inoculation of RF with termite bacteria increased protease activity, while activities of carboxymethyl-cellulase, microcrystalline-cellulase, α-amylase and filter paper degrading activity remained unchanged(P0.05). Overall, the results of this study indicated that transferring lignocellulose-degrading bacteria, isolated from digestive tract of termite, to rumen liquid increased protozoa and proteolytic bacteria population and consequently increased protease activity and ammonia-N concentration in vitro, however, no effect on fermentation and fiber degradation parameters were detected. These results suggest that the termite bacteria might be rapidly lysed by the rumen microbes before beneficial effects on the rumen fermentation process could occur.     

Ecological and Industrial Implications of Dynamic Seaweed-Associated Microbiota Interactions

Seaweeds are broadly distributed and represent an important source of secondary metabolites (e.g., halogenated compounds, polyphenols) eliciting various pharmacological activities and playing a relevant ecological role in the anti-epibiosis. Importantly, host (as known as basibiont such as algae)–microbe (as known as epibiont such as bacteria) interaction (as known as halobiont) is a driving force for coevolution in the marine environment. Nevertheless, halobionts may be fundamental (harmless) or detrimental (harmful) to the functioning of the host. In addition to biotic factors, abiotic factors (e.g., pH, salinity, temperature, nutrients) regulate halobionts. Spatiotemporal and functional exploration of such dynamic interactions appear crucial. Indeed, environmental stress in a constantly changing ocean may disturb complex mutualistic relations, through mechanisms involving host chemical defense strategies (e.g., secretion of secondary metabolites and antifouling chemicals by quorum sensing). It is worth mentioning that many of bioactive compounds, such as terpenoids, previously attributed to macroalgae are in fact produced or metabolized by their associated microorganisms (e.g., bacteria, fungi, viruses, parasites). Eventually, recent metagenomics analyses suggest that microbes may have acquired seaweed associated genes because of increased seaweed in diets. This article retrospectively reviews pertinent studies on the spatiotemporal and functional seaweed-associated microbiota interactions which can lead to the production of bioactive compounds with high antifouling, theranostic, and biotechnological potential.     

Marine-Derived Chitosan Nanoparticles Improved the Intestinal Histo-Morphometrical Features in Association with the Health and Immune Response of Grey Mullet (Liza ramada)

Marine-derived substances are known for their beneficial influences on aquatic animals’ performances and are recommended to improve intestinal health, immunity, and anti-oxidative status. The present study investigates the role of chitosan nanoparticles on the intestinal histo-morphometrical features in association with the health and immune response of Grey Mullet (Liza ramada). Chitosan nanoparticles are included in the diets at 0, 0.5, 1, and 2 g/kg and introduced to fish in a successive feeding trial for eight weeks. The final body weight (FBW), weight gain (WG), and specific growth rate (SGR) parameters are significantly increased while feed conversion ratio (FCR) decreases by chitosan nanoparticles compared to the control (p < 0.05). The morphometric analysis of the intestines reveals a significant improvement in villus height, villus width, and the number of goblet cells in chitosan-treated groups in a dose-dependent manner. Additionally, there is a positive correlation between the thickness of the enterocyte brush border and the chitosan dose, referring to an increasing absorptive activity. Histologically, the intestinal wall of Grey Mullet consists of four layers; mucosa, sub-mucosa, tunica muscularis (muscular layers), and serosa. The histological examination of the L. ramada intestine shows a normal histo-morphology. The epithelial layer of intestinal mucosa is thrown into elongated finger-like projections, the intestinal villi. The values of hemoglobin, hematocrit, red blood cells (RBCs), total protein (TP), albumin, and globulin are significantly increased in fish fed 1, and 2 g/kg of chitosan nanoparticles compared to fish fed 0 and 0.5 g/kg (p < 0.05). The highest levels of TP and albumin are observed in fish fed 1 g/kg diet (p < 0.05). The lysozyme activity and phagocytic index are significantly enhanced by feeding chitosan nanoparticles at 0.5, 1, and 2 g/kg, whereas the phagocytic activity is improved in fish fed 1 and 2 g/kg (p < 0.05). The highest lysozyme activity and phagocytic index are observed in fish fed 1 g/kg. SOD is significantly activated by feeding chitosan nanoparticles at 1 g/kg. Simultaneously, glutathione peroxidase (GPx) and catalase (CAT) activities also are enhanced by feeding chitosan at 1 and 2 g/kg, compared to fish fed 0 and 0.5 g/kg (p < 0.05). The highest GPx and CAT activities are observed in fish fed 1 g/kg (p < 0.05). Conversely, the malondialdehyde (MDA) levels are decreased by feeding chitosan at 1 and 2 g/kg, with the lowest being in fish fed 1 g/kg (p < 0.05). To summarize, the results elucidate that L. ramada fed dietary chitosan nanoparticles have a marked growth rate, immune response, and anti-oxidative response. These improvements are attributed to the potential role of chitosan nanoparticles in enhancing intestinal histo-morphometry and intestinal health. These results soundly support the possibility of using chitosan nanoparticles at 1–2 g/kg as a feasible functional supplement for aquatic animals.     

Development and testing of a surface roughness measurement device based on aerial ultrasonic reflections

Paddy and Water Environment - Repairs of concrete irrigation channels in Japan are guided to a large extent by the degree to which their walls have degraded over decades of use. Current methods of...     

SnToxA,SnTox1, and SnTox3 originated in Parastagonospora nodorum in the Fertile Crescent

The centre of origin of the globally distributed wheat pathogen Parastagonospora nodorum has remained uncertain because only a small number of isolates from the Fertile Crescent were included in earlier population genetic and phylogeographic studies. We isolated and genetically analysed 193 P. nodorum strains from three naturally infected wheat fields distributed across Iran using 11 neutral microsatellite loci. Compared to previous studies that included populations from North America, Europe, Africa, Australia, and China, the populations from Iran had the highest genetic diversity globally and also exhibited greater population structure over smaller spatial scales, patterns typically associated with the centre of origin of a species. Genes encoding the necrotrophic effectors SnToxA, SnTox1, and SnTox3 were found at a high frequency in the Iranian population. By sequencing 96 randomly chosen Iranian strains, we detected new alleles for all three effector genes. Analysis of allele diversity showed that all three effector genes had higher diversity in Iran than in any population included in previous studies, with Iran acting as a hub for the effector diversity that was found in other global populations. Taken together, these findings support the hypothesis that P. nodorum originated either within or nearby the Fertile Crescent with a genome that already encoded all three necrotrophic effectors during its emergence as a pathogen on wheat. Our findings also suggest that P. nodorum was the original source of the ToxA genes discovered in the wheat pathogens Phaeosphaeria avenaria f. sp. tritici 1, Pyrenophora tritici-repentis, and Bipolaris sorokiniana.     

Response of industrial hemp to Salsola kali subsp. tragus densities under organic and conventional fertilisation

A 2-year field study was conducted to determine the effects of different nutrition systems and Salsola kali subsp. tragus densities on industrial hemp yield and its components. Experiments were conducted as a split plot in a randomised complete block design with three replicates. Factors were fertilisation (poultry manure, vermicompost and nitrogen fertiliser) as the main plot and weed density (0, 5, 10, 15 and 20 plants/m²) as the subplot. Results indicated that the maximum number of racemes per plant, seeds per raceme, 1000-seed weight, biomass, grain yield and harvest index (HI) of industrial hemp were obtained using vermicompost and were reduced with nitrogen fertiliser application. All measured properties in hemp plants decreased due to increasing S. kali subsp. tragus density, especially at 15 and 20 plants/m². The most significant reduction in hemp grain yield and its components was observed by increasing weed density with the application of nitrogen fertiliser. The application of vermicompost at high weed densities resulted in greater hemp grain yield and its components compared with nitrogen fertiliser. It is recommended to apply organic fertilisers, especially vermicompost at high S. kali subsp. tragus densities.     

Retracted: Study of testis histology and sperm morphology in the Bunnei,Barbus sharpeyi (Gunther, 1874) induced by luteinizing hormone‐releasing hormone analogue and carp pituitary extract

This study was conducted to determine the effects of hormone treatment on testis structure in Barbus sharpeyi, as well as the morphology of sperm examined by scanning electronic microscopy (SEM). Male B. sharpeyi were divided into three groups (three fish per group) and injected with luteinizing hormone – releasing hormone analogue (LHRH–A₂) or carp pituitary extract (CPE). The first and second groups were treated with 10 μg kg^?1 LHRH–A₂ and metoclopramide (MET), and their testis were sampled pre‐ and Poststripping respectively. The third group received 2 mg kg^?1 CPE and were killed pre‐stripping. Based on the histological results obtained, the testicular connective tissue of the lumen was thicker, and seminal vesicles were of a lower volume, in fish injected with CPE in comparison to the other groups. After treatment with LHRH–A₂ and MET, not all spermatozoa within the testis were ejaculated, and only a small amount of sperm was obtained by abdominal stripping. The highest and lowest diameters of connective tissue within lobules were observed in fish receiving CPE and LHRH–A₂ treatments respectively. There was a significant difference (P < 0.05) in lobule space between the fish injected with the CPE and the fish injected with the LHRH–A₂ and MET. The SEM results revealed that the spermatozoa of B. sharpeyi were composed of a spherical to elliptical head, a cylindrical midpiece, and a lengthy flagellum. In conclusion, it was found that injection with LHRH–A₂ and MET improved the spermatogenic process in comparison to injection with CPE.