Thermal and water regime studied in a thin soil layer of green roof systems at early stage of pedogenesis

Purpose

The potential heat load and stormwater reduction of the anthropogenic, lightweight soil systems, such as green roofs, are valuable to heat island effect mitigation and to urban water management. Benefits of extensive green roofs, as widely used vegetated roof system with very thin soil layer, could be threatened by temporal changes of the soil structure.

Materials and methods

Green roof raised beds filled with two different anthropogenic soils (artificially constructed stripped topsoil with admixed crushed bricks and a commercial mixture of a technogenic substrate) were built to investigate the benefits of such systems in a temperate climate. These two soils were chosen with the intent to compare their thermal and water regime. One soil is expected to be favorable for hydrological functioning, whereas the other one for the thermal performance. Temperature and water balance measurements complemented with meteorological observations and knowledge of physical properties of the soil substrates provide the basis for detailed analysis of a thermal and hydrological regime in green roof raised beds. Moreover, the state of pedogenesis was studied on undisturbed soil samples by means of X-ray computed tomography.

Results and discussion

The water balance of green roof raised beds was calculated for a whole vegetation season and individual rainfall events. Runoff from raised beds was 38 and 63 % of received rainfall. On the basis of a detailed analysis of individual rainfall events, rainfall-runoff dependency was found for both raised beds. The difference between measured actual evapotranspiration and calculated potential evapotranspiration was discussed on the period with contrasting conditions in terms of moisture stress. Thermal characteristics of soil substrates result in a highly contrasting diurnal variation of soil temperatures. Analysis of X-ray computed tomography-derived macroporosity profiles reveals significant temporal changes in the soil comprised of the stripped topsoil with admixed crushed bricks.

Conclusions

Both green roof systems were able to reduce heat load of roof construction when comparing with the concrete roof construction. Similarly, received rainfall was significantly reduced. The extent of rainfall reduction mainly depends on soil, vegetation status, and experienced weather patterns. Methods used for non-invasive imaging proved to be beneficial for studying of soil structure changes.

     

Latent Process Modelling of Threshold Exceedances in Hourly Rainfall Series

Two features are often observed in analyses of both daily and hourly rainfall series. One is the tendency for the strength of temporal dependence to decrease when looking at the series above increasing thresholds. The other is the empirical evidence for rainfall extremes to approach independence at high enough levels. To account for these features, Bortot and Gaetan (Scand J Stat 41:606–621, 2014) focus on rainfall exceedances above a fixed high threshold and model their dynamics through a hierarchical approach that allows for changes in the temporal dependence properties when moving further into the right tail. It is found that this modelling procedure performs generally well in analyses of daily rainfalls, but has some inherent theoretical limitations that affect its goodness of fit in the context of hourly data. In order to overcome this drawback, we develop here a modification of the Bortot and Gaetan model derived from a copula-type technique. Application of both model versions to rainfall series recorded in Camborne, England, shows that they provide similar results when studying daily data, but in the analysis of hourly data the modified version is superior.     

Genetic variation of the durum wheat landrace Haurani from different agro-ecological regions

The durum wheat landrace Haurani (Triticum durum Desf.) is grown under contrasting climatic regions of Syria from Deir Ezzor, in the North-East (230 m altitude, 150 mm mean annual rainfall), to Qunaytra, in the South-West (1060 m altitude, 825 mm mean annual rainfall). In order to assess the genetic variation between and within Haurani populations, samples from eight provinces of Syria (Daraa, Damascus, Qunaytra, Deir Ezzor, Hassakeh, Aleppo, Homs and Hama) were analysed by RFLPs and seed storage proteins of glutenin subunits as markers. The analyses showed the presence of genetic polymorphisms in all populations with the highest values in those from Homs and Hassakeh. Moreover, the results point out differences in genetic distances between populations; some populations were further apart, such as Damascus and Aleppo, whereas others were closer to each other, for instance Homs and Hama. Cluster analysis identified two distinct groups of populations, characterized by geographical proximity, with similar rainfall and altitude. It is suggested that the similarity of landraces at locations close to each other might be the result of more frequent seed exchanges between farmers or of gene flow due to 5% estimated outcross rate of Haurani.     

The Application of Multivariate Statistical Methods for the Evaluation of Soil Profiles (8 pp)

Background, Aim and Scope   Contamination of soils does not only occur on their surface over large areas, but also in depth. Therefore a characterization of soil state after pollution demands a three-dimensional soil sampling, by what a large number of samples has to be analyzed. Analytical results could be evaluated by multivariate statistical methods, which have already been used for the evaluation of data sets containing results from soil sampling of two dimensions like areas or single profiles. In this case study, multivariate statistical methods were applied to investigate structure and interactions between features in a data set containing results of three-dimensional soil sampling. The investigated soil profiles were contaminated by emissions of a former cement and phosphate fertilizer plant. The aim of this study was to determine the remaining extent of contamination and to analyze whether pollutants are mobilized and vertically transported within the profiles. Materials and Methods: Three soil profiles were sampled in the surroundings of the plant. Grain size, organic and carbonatic bonded carbon, pH value, and the total contents of Ca, Cd, Co, Cu, F, Fe, K, Mn, Mg, Na, Ni, P, Pb, and Zn were determined. The resulting data set was evaluated by cluster analysis, linear discriminant analysis, and principal components analysis. The sequential extraction procedure according to Zeien and Brümmer was applied to analyze the binding properties of Ca, Cd, Cu, Na, Pb, and Zn from selected samples. Results: Cd was identified as contaminant of the top soils. The pH values of the bottom soils were determined to be in alkaline range, which is unnaturally high. Variables were clustered according to enrichment of variables in top soils. The samples were classified regarding their pollution state and their substrate by cluster analysis, which was confirmed by linear discriminant analysis. Geogenic and anthropogenic sources of variables as well as relationships between variables like the binding of heavy metals at organic matter were detected by using principal components analysis. The binding of heavy metals at organic matter in the top soils was confirmed by the results of the applied sequential extraction. A vertically altered distribution of Na binding was determined. Discussion: According to the current soil conditions, the uptake of heavy metals had probably occurred by the over ground part of plants during the deposition. The distribution of Na should likely result from the vertical transport of Na, which would also explain the high pH values of the bottom soils by ion exchange. Altogether, the main amount of deposited Ca, F, Na, P, and heavy metals is likely nearly insoluble bound in the top soils. Conclusions: Ten years after the end of production, the pollution of top soils in the surroundings of the former plant is still high. However, regarding the ecotoxicological relevance the now explored interactions between several soil features and elements strongly indicate that there is no short-term to medium-term risk of a mobilization of the deposited elements with the exception of Na. Recommendations and Perspectives: The results of this case study prove that multivariate statistical methods are powerful tools to explore interactions of variables and relationships in a data set derived from three dimensional soil sampling. The methods applied in this work can be highly recommended for evaluations of large data sets resulting from two- or three-dimensional samplings. Multivariate statistical methods enable the characterization of soils and their pollution state in a simple and economic way.     

Molecular phylogeny of Chinese vegetable mustard (<Emphasis Type="Italic">Brassica juncea</Emphasis>) based on the internal transcribed spacers (ITS) of nuclear ribosomal DNA

Sequence variation of nuclear internal transcribed spacer regions of ribosomal DNA (ITS1, 5.8S rRNA and ITS2) from Chinese vegetable mustards (AB-genome) and its putative parents Brassica rapa (the A-genome) and Brassica nigra (the B-genome) were used to investigate the molecular phylogeny and the probable evolutional pattern of this amphidiploid species that uniquely formed in China. Totally, 16 accessions of Chinese vegetable mustard those covering nearly all the diverse variations were included in this study, and together with three accessions of B. rapa and one accession of B. nigra. The results disclosed two strongly supported clades, one containing four accessions of vegetable mustard which have closer relationship with B-genome species “B.nigra” lineage and the other containing 12 accessions of B. juncea and three A-genome accessions. This classification was in disagreement with the evidence from chloroplast DNA, mitochondrial DNA, nuclear DNA restriction fragment length polymorphism (RFLP), which suggested that B. juncea was closely related to the A-genome type. For the incongruence, we speculated that the B. juncea crops derived from Chinese have evolved through different recombined events of the diploid morphutypes and evolved unidirectional concerted evolution. The traditional phenotypic classification of B. juncea was not wholly supported by ITS results, and hence the phylogenetic relationships among these subspecies need to be reconsidered on molecular level.     

Estimating the production losses due to cystic echinococcosis in water buffaloes (Bubalus bubalis) in Turkey

Veterinary Research Communications - The current study aimed at estimating the direct (condemned offal) and indirect (meat, milk, and fecundity losses) production losses due to cystic...     

Demographic dynamics and off-take of cattle herds in southern Mali

The herds of 95 families were monitored for 1 year in eight villages in the cotton-growing region of southern Mali. In 2006–2007, reproduction performances were average, with 0.54 calvings/year per cow, and mortality was low. Herd numerical productivity is not very high, less than 0.13/year, because of the high proportion of males kept for animal draught. Depending on the herd size, the behaviour of the families differs, in terms of off-take and in-take of animals. Families that only have one or two draught animals seek to increase their animal draught capacity, with a negative net off-take (−0.13/year). Families with two to three cows have a very low net off-take (0.02/year), with culling of adult animals compensated by purchase. They therefore capitalised this year, with an annual herd growth of 8%. Families with a very large herd (20 to 50 cows) take off more of their stock, with a net off-take of 0.08/year (very few animal purchases) and make a stock growth of 5%. And finally, families with an average-sized herd (6 to 19 cows) take off the whole of the year’s production, with a net off-take of 0.11/year and a nil stock growth rate. The use of a demographic model made it possible to measure the sensitivity of the productivity rate to the different demographic parameters.     

Preparation and properties of antibacterial Poly(vinyl alcohol) nanofibers by nanoparticles

Poly(vinyl alcohol) (PVA)/Ag-zeolite nanofiber webs were prepared with different concentrations of Ag-zeolite nanoparticles by the electrospinning technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Instron, and antibacterial activities analysis were utilized to characterize the morphology and properties of the PVA/Ag-zeolite nanofiber webs. The study results showed that the polymer concentration, applied voltages and tip-to-collector distances were the main factors influencing the morphology of the electrospun nanofiber webs. The introduction of Ag-zeolite nanoparticles improved the mechanical properties and thermal stability of the PVA nanofiber webs. TEM data demonstrated that the Ag-zeolite nanoparticles were well distributed within the nanofiber. FTIR revealed a possible interaction between the PVA matrix and the Ag-zeolite nanoparticles. These fibers showed an antibacterial efficacy of 99.8 % and over against Staphylococcus aureus and Klebsiella pneumoniae at Ag-zeolite concentrations of 1 % and over, because of the presence of the silver nanoparticles in the zeolite.     

Preparation and properties of solid polymer electrolyte based on imidazolium-based ionic liquids for structural capacitors

We prepared solid polymer electrolytes (SPEs) composed of poly(ethylene glycol) monomethyl ether acrylate (1A9OMe) and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIm][OTF]) and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl) imide ([EMIm][TFSI]) as the ionic liquid. The SPEs formed by appropriately adding ionic liquids in the 1A9OMe prior to thermal cure. The ratio of 1A9OMe and ionic liquid was 1:9, 3:7, and 5:5, respectively. The characterization of solid polymer electrolytes were investigated using Fourier transform infrared spectroscopy in the attenuated total reflectance mode (FTIR-ATR), Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and glavanostatic charge-discharge test. The highest ionic conductivity of SPEs was found to be 4.90×10^?4 S/cm in a 1A9OMe/[EMIm][OTF] of 3:7. As IL contents were increased, the specific capacitance of supercapacitor was increased. The specific capacitance of supercapacitor for ionic liquid with large ion size was lower than that for ionic liquid with smaller ion size.     

Synthesis of hydrophobic anthraquinoid magenta dyes having linear alkyl substituents

A new series of magenta dyes having different length of alkyl substituents was synthesized to dye unmodified polypropylene (PP) and ultra-high molecular weight polyethylene (UHMWPE) fiber. It could be concluded that the affinity of the dyes onto unmodified PP and UHMWPE fibers was increased with the increase of the length of alkyl substituents. The optimum length of alkyl group was determined as the longest dodecyl-substituted dye in this study. Their absorption spectra appeared almost the same at visible range, which meant that the length of alkyl substituents did not affect the color appearance of the dyes. The color fastness properties of the dyeings to washing, rubbing and light were good enough for commercialization.