Investigation of change in tangential strain on the inner bark of the stem and root ofBetula platyphylla var.japonica andAcer mono during sap season

Although it is well known that sap exudation during early spring in temperate deciduous trees occurs in response to daytime warming and nighttime cooling, the mechanisms of the process are not yet fully understood. Previous theories suggested that changes in stress in the wood caused by daytime heating and nighttime cooling might be linked with sap flow. Consequently, a study of itaya-kaede maple (Aver mono) and shirakamba birch (Betula platyphylla var.japonica) looked at tangential strains. One-hour intervals for 3 years of the tangential strains on the inner bark of stem and root were measured in itaya-kaede maple and shirakamba birch during the sap exudation season. The measurements indicated different mechanisms of sap exudation in these two trees. During the sap exudation season in late March, when the temperature fluctuated around 0°C, the tangential strain in the root of itaya-kaede maple showed expansion in the daytime and contraction at night. Conversely, in early April the tangential strain in the root of shirakamba birch exhibited contraction in the daytime and expansion at night. The changes in tangential strains in itaya-kaede maple were attributed to conditioning, a known concept used to explain the uptake mechanism of soil water in maple and its exudation during early spring. However, because the change in tangential strain in the roots of shirakamba birch was similar to that found during the rampant season, sap exudation was not attributed to conditioning but to the plentiful supply of water from the roots. The implications of these mechanisms are that different sap harvesting techniques may be appropriate for different tree species.     

Stand Density Control Diagrams for Scots pine and Austrian black pine plantations in Bulgaria

Stand Density Control Diagram (SDCD) is a stand-level mathematical model, which describes the relationships between yield, density and mortality throughout all stages of stand development. The SDCD is primarily used to derive density control schedules by management objectives. The main objectives of the present study are to define a modified model of SDCD for application to Scots pine (Pinus sylvestris L.) and Austrian black pine (Pinus nigra Arn.) plantations in Bulgaria, to examine the fitness of the model with representative experimental data sets from plantations of both species and to present a way of direct application of the SDCDs for practical purposes. The constructed SDCDs characterize the spatial-temporal dynamics of the pine plantations in a broad range of densities, forest sites and growth stages from 4 to 26 (28) m of dominant height class. The full density lines were fixed with self-thinning exponents α = 1.69 and α = 1.75 for Scots pine and Austrian black pine, respectively, and the trajectories of natural thinning for 23 initial densities (444-40000/ha) were determined. A direct way for application of the SDCDs to the plantation management was designed to estimate the optimal initial densities for the maximum attainable final yield and large-size wood production by self-thinning stands.     

Effect of the lateral growth rate on wood properties in fast-growing hardwood species

We investigated the feasibility of using several fast-growing tropical or subtropical hardwood species for timber production by measuring key wood qualities in relationship to the high rates of lateral growth. The trees tested were sampled from even-aged plantations of Acacia mangium, A. auriculiformis, hybrid Acacia (A. mangium × A. auriculiformis), Eucalyptus grandis, E. globulus, and Paraserianthes falcataria (Solomon and Java origin) that had already reached commercial harvesting age. The released strain of the surface growth stress (RS), xylem density (XD), microfibril angle (MFA), and fiber length (FL) were measured at the outermost part of the xylem at breast height in each tree. Results were then compared to the lateral growth rate (radius/age) at breast height, which provides a relative indicator of the amount of tree growth per year. Our findings indicated that RS was constant, regardless of lateral growth rate in each species. Similar results were observed for XD, MFA, and FL, with a few exceptions, suggesting that high growth rates do not intrinsically affect the wood properties of fast-growing tropical or subtropical species that have reached harvesting age. However, special attention must be paid to patterns of xylem maturation when developing plantations of such species.     

In situ measurement of tensile elastic moduli of individual component polymers with a 3D assembly mode in wood cell walls

We attempted to measure in situ the tensile elastic moduli of individual component polymers with a three-dimensional (3D) assembly mode in the cell walls of Sugi (Cryptomeria japonica D. Don) without isolating the polymers. To prepare wood tangential slices [50 × 6 × 0.2 mm (L × T × R)] consisting of lignin with a 3D assembly mode in the cell walls, cellulose and hemicellulose were removed using the method of Terashima and Yoshida (2006) to obtain methylated periodate lignin slices. To prepare wood slices consisting of polysaccharide with a 3D assembly mode in the cell walls, lignin was removed using the method of Maekawa and Koshijima (1983) to obtain holocellulose slices. Static tensile test was applied to determine the elastic moduli of 3D lignin and 3D polysaccharide slices. The followings were revealed. The elastic modulus of the 3D lignin slices was 2.8 GPa, regardless of the microfibril angle (MFA) in the slices. The elastic moduli of the 3D polysaccharide slices with MFAs of 14°, 23°, 34°, and 42° were 18, 12, 9, and 4 GPa, respectively. The former shows that the lignin with a 3D assembly mode behaves as an isotropic substance in the cell walls, while the latter suggests that the 3D polysaccharide slice shows marked anisotropic structure in the cell wall. Despite the fact that cellulose content increased after lignin removal, values of substantial elastic modulus of the cell wall slightly decreased regardless of MFA. Following two possible reasons were pointed out for explaining this phenomenon. First, lignin removal caused an artifactual deterioration in the polysaccharide slices at the level of macromolecular aggregate. Second, rigid and fusiform-shaped cellulose crystallites are dispersed in the soft matrix of amorphous polysaccharide, and those are loosely connected to each other by the intermediary of matrix polysaccharide. Those suggest that the rigid cellulose crystallite can optimize its strong mechanical performance in the polysaccharide framework of the wood cell wall in combination with the ligninification.     

Physical and mechanical properties of wood after moisture conditioning

Some properties of wood (hinoki:Chamaecyparis obtusa) moisture-conditioned by an adsorption process from a dry state and by two desorption processes (from a water-saturated state and from a state with a moisture content slightly below the fiber saturation point) were investigated. The moisture contents of wood conditioned by the adsorption process and by the desorption process continued to approach to one another for the moisture-conditioning period of over 50 weeks. Accordingly, sorption hysteresis should be regarded as a transitional phenomenon that occurs during the process of approaching the true equilibrium, which requires a long time. The wood conditioned by the desorption process beginning from a water-saturated state showed slightly smaller dimensions than those conditioned by the adsorption process with the same moisture content; however, the wood conditioned by the desorption process from a moisture content below the fiber saturation point showed slightly larger dimensions than those conditioned by the adsorption process. The wood conditioned by the adsorption process from a dry state showed a higher modulus of elasticity and modulus of rupture than did the wood conditioned from a water-saturated state with the same moisture content. The mechanical properties of the wood also varied based on the states at which the desorption process was started. This is a notable characteristic of the relation between the drying condition and the mechanical properties of wood.     

Physiological and behavioural effects of an intracerebroventricular injection of corticotropin releasing hormone in goats

This study investigated the effects of an intracerebroventricular (ICV) injection of corticotropin releasing hormone (CRH) on physiological and behavioural responses in goats. In Experiment 1, saline (control) or saline plus 25 microg of ovine CRH was injected into the third ventricle of castrated male goats. CRH increased plasma cortisol (Cor) levels markedly within 15 min, but had little effect on plasma glucose (Glu). Compared with saline injected goats, CRH decreased the total duration of lying behaviour but increased its frequency, and suppressed rumination and self-grooming. In Experiment 2, the effects of an intravenous (IV) injection of human adrenocorticotropic hormone (ACTH) (1-24) (0.1mg) were examined and an IV injection of saline was used as control. ACTH increased plasma Cor levels markedly, but did not change any behaviour compared with controls. It was concluded that CRH mediated the response of the hypothalamus-pituitary-adrenal (HPA) axis and behaviour following stress in goats, although the CRH-induced behavioural changes were independent of the HPA axis and seemed to be the result of direct action within the central nervous system.     

A surge-like increase in luteinizing hormone preceding musth in a captive bull African elephant (Loxodonta africana)

This study was conducted to determine the correlation between reproductive hormones and musth in a male African elephant. Changes in circulating luteinizing hormone (LH), follicle stimulating hormone (FSH), testosterone and immunoreactive (ir-) inhibin and the degree of musth were evaluated for 4 years. LH increased 4 weeks before musth began. The highest concentrations of testosterone and ir-inhibin were observed from April to October. There were positive correlations among testosterone, ir-inhibin and musth behavior. These findings suggested that the surge-like LH in the pre-musth period might stimulate secretion of testosterone and ir-inhibin and thus initiate the musth behavior. This study also suggested that the high LH level before musth might be a useful biomarker for the beginning of the musth season.     

Molecular typing of Salmonella enterica serovar Enteritidis isolates from food-producing animals in Japan by multilocus variable-number tandem repeat analysis: evidence of clonal dissemination and replacement

Background

Salmonella enterica serovar Enteritidis is a zoonotic pathogen. Human infections are associated with contaminated eggs and egg products. In Japan, since 1989, the incidence of food-borne disease caused by S. Enteritidis has increased and a pandemic has occurred; however, little is known about changes that occurred before and after this pandemic event in the dominant lineage of isolates from food-producing animals. This study aimed to determine the S. Enteritidis lineages in Japan over the last few decades by using multilocus variable-number tandem repeat analysis (MLVA).

Findings

MLVA was used to analyse 79 S. Enteritidis isolates collected from chickens (n = 63), cattle (n = 12), pigs (n = 2), and goats (n = 2) during 1975–2009. The S. Enteritidis isolates showed 14 different MLVA allele combinations, which were classified into two major clusters (A and C) and a minor cluster (B). All the 62 isolates in cluster A were isolated after 1988, whereas 13 of the 17 isolates belonging to cluster B and C were isolated before 1989.

Conclusions

The MLVA results showed that cluster C was predominant before 1989, and isolates in cluster A disseminated since 1989 and replaced the previous dominant clone, suggesting that isolates of cluster A originated from imported S. Enteritidis infection.     

Comparison of Salmonella enterica serovar Abortusequi isolates of equine origin by pulsed-field gel electrophoresis and fluorescent amplified-fragment length polymorphism fingerprinting

Equine paratyphoid is caused by Salmonella enterica serovar Abortusequi, and manifests mainly as abortion in the mare. We compared S. Abortusequi strains isolated in Japan and other countries using pulsed-field gel electrophoresis (PFGE) and fluorescent amplified-fragment length polymorphism (FAFLP) analysis. PFGE analysis of S. Abortusequi strains gave 21-27 fragments ranging in size from 33 to 602kb. Although two PFGE profiles were observed among the 20 S. Abortusequi isolates in Japan, the restriction fragments originating from the chromosome were common between the two profiles. The similarity index of the two profiles was 90.9%, while those between Japanese and five other S. Abortusequi strains were 29.8-37.5%. On the other hand, FAFLP analysis of S. Abortusequi strains generated 64-67 amplified fragments ranging in size from 100 to 400bp. One polymorphic fragment was observed among the 20 S. Abortusequi isolates in Japan. These data indicate the close relation of this agent in Japan. S. Abortusequi strains sharing a common ancestry might have been conserved in Japan.     

Negative gravitropism and growth stress in GA3-treated branches ofPrunus spachiana Kitamura f.spachiana cv.Plenarosea

One of the roles of growth stress in branch shape formation was investigated using a weeping-type Japanese cherry,Prunus spachiana. Negative released strains, caused by longitudinal tensile growth stresses, were detected in the upper side of gibberellin A₃-treated (GA₃-treated) and control branches. The mean value of the released strain in the upper side of the treated branches was –0.104%, which was larger than the value (–0.067%) observed in the control branches. Both branches formed tension wood in the upper side of the xylem, and the treated branches formed tension wood near the pith as well. This suggested that the treated branches generated larger tensile growth stress from the early growth stages. The successive generation of growth stress from the early growth stages was considered to generate forces large enough to bend the branch upward.