The occurrence of reflexes and reactions in cattle following stunning with a captive bolt at the slaughterhouse

The difference in the frequency of the occurrence of reflexes/reactions in 355 cows (average weight 505.5 ± 7.9 kg) and 262 bulls (average weight 735.6 ± 8.4 kg) following stunning with a Matador SS 3,000 B trigger‐activated captive bolt gun (Termet) was determined. The stun shot more than 2 cm from the ideal position was found in 79.6% of animals. Vocalization, corneal reflex, rhythmic breathing, blinking, eyeball rotation and the absence of tongue protrusion occurred more frequently in bulls (p < .05). Spontaneous limb movements and nystagmus occurred more frequently in cows (p < .05). No difference between bulls and cows was determined in the occurrence of a response to painful stimuli or attempts to regain normal posture. No dependency was determined between the frequency of the occurrence of a reflex/reaction and the distance of the stun shot from the ideal point on the skull for any of the monitored signs. This study shows that the occurrence of reflexes/reactions following the stunning of cattle with a captive bolt is not only dependent on the position of the shot if placed within a 9 cm radius from the ideal point on the cattle skull.     

Observations on the muscle relaxant rocuronium bromide in the horse--a dose-response study

OBJECTIVE: To investigate the onset and duration of neuromuscular blockade of rocuronium bromide and its associated haemodynamic effects at three doses in healthy horses. STUDY DESIGN: Prospective, randomized experimental study. ANIMALS: Seven adult horses aged 3-20 (mean 10.3) years and weighing 466 +/- 44 (mean +/- SD) kg. METHODS: Horses were anaesthetized three times with at least 2 weeks between. They were pre-medicated with 0.6 mg kg(-1) xylazine and 0.01 mg kg(-1) butorphanol i.v.. Anaesthesia was induced with 2.2 mg kg(-1) ketamine and 0.1 mg kg(-1) diazepam i.v.. Following orotracheal intubation anaesthesia was maintained with isoflurane in 100% oxygen. Intermittent positive pressure ventilation was initiated and the horses were ventilated at a respiratory rate (fr) of 4-8 breaths minute(-1). Neuromuscular function was monitored with an acceleromyograph. The peroneal nerve was stimulated with train-of-four (TOF) mode at 2 Hz every 15 seconds. Each horse received, in randomly assigned order, one of the three doses of rocuronium: 0.2 mg kg(-1) (D02), 0.4 mg kg(-1) (D04) or 0.6 mg kg(-1) (D06) i.v.. Lag time, onset time, time of no response, duration of action and the TOF ratio 0.7 and 0.9 were measured. Recovery time (T1(25-75)) was calculated. Vital parameters were recorded at 5-minute intervals on a standard anaesthetic record form. RESULTS: Rocuronium produced a dose-dependent duration of action in isoflurane-anaesthetized horses. 100% block was observed in D04 and D06 but not in D02, in which the maximum decrease of the first twitch of TOF attained was 91.5 +/- 16.5%. Time to T1(25) was 13.1 +/- 5.5 minutes, 38.6 +/- 10.1 minutes and 55 +/- 9.8 minutes in D02, D04 and D06 respectively. There was a significantly shorter time for TOFR 0.9 with 0.2 mg kg(-1) compared with 0.4 and 0.6 mg kg(-1) rocuronium. T1(25-75) in D04 and D6 was not statistically significantly different. Heart rate, systolic, diastolic and mean arterial blood pressure increased slightly during the observation period. CONCLUSION: Rocuronium is an effective nondepolarizing muscle relaxant in horses under isoflurane anaesthesia. It had a dose-dependent onset and duration of action. Rocuronium did not produce significant changes in the measured cardiovascular parameters.     

The role of indigenous trees for the conservation of biocultural diversity in traditional agroforestry land use systems: The Bungoma case study: In-situ conservation of indigenous tree species

In order to precisely assess the role of agroforestry for the conservation of (agro-)biological diversity there is a need to adjust sampling methods used in plant sociology. This study is on the contribution of agroforestry land use to the in-situ conservation of indigenous trees within a typical East-African smallholder farming system in Western Kenya. A modified approach to measuring species richness and abundance is presented. The selection of tree-rich structures was done according to management patterns rather than considering syntaxonomic classifications from the vegetation science point of view. This approach, which is better suited to the strongly human-influenced vegetation of agroecosystems, employs between-management unit diversity measures to help evaluate abundance and constancy of species in particular management units. The predominant off-farm vegetation patterns are riverine forests, rocky hillsides, hedgerows, wooded grassland relicts, woodlands or colline forest relicts and tree groves whereas the noticeable tree-rich on-farm management units are homegardens, homesteads, life fences, coffee- and banana-groves and annual cropping fields. 98% out of all indigenous tree species known from Bungoma, occur in off-farm lands. 53% of the indigenous tree species occur in tree rich on-farm management units while 47% of the indigenous trees are dependent on the maintenance of off-farm lands. Hedgerows embody the most promising secondary vegetation structure that shows ample potential to accommodate a wide range of indigenous perennial species outside the natural vegetation formations. The pattern of distribution of various vegetation structures, and the mixture with diverse tree-based on-farm plots are interesting features in regard to floristic and eco-diversity on a landscape level. In this respect, three areas that show different population densities and distinct agro-historical conditions were compared. In regions of particular high population density the degree of association of various functional land use forms and woodland structures – each characterised by its own floristic make-up – is comparatively high. In contrast, in regions with less population but that were settled at a later date, one encounters fewer stands of woody plants with lower numbers of species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Forest management and carbon sequestration in wood products

Wood products are considered to contribute to the mitigation of carbon dioxide emissions. A critical gap in the life cycle of wood products is to transfer the raw timber from the forest to the processing wood industry and, thus, the primary wood products. Therefore, often rough estimates are used for this step to obtain total forestry carbon balances. The objectives of this study were (1) to examine the fate of timber harvested in Thuringian state forests (central Germany), representing a large, intensively managed forested region, and (2) to quantify carbon stocks and the lifetime of primary wood products made from this timber. The analyses were based on the amount and assortments of actually sold timber, and production parameters of the companies that bought and processed this timber. In addition, for coniferous stands of a selected Thuringian forest district, we calculated potential effects of management, as expressed by different thinning regimes on wood products and their lifetimes. Total annual timber sale of soft- and hardwoods from Thuringian state forests (195,000 ha) increased from about 136,893 t C (~0.7 t C ha⁻¹ year⁻¹) in 1996 to 280,194 t C (~1.4 t C ha⁻¹ year⁻¹) in 2005. About 47% of annual total timber harvest went into short-lived wood products with a mean residence time (MRT) < 25 years. Thirty-one per cent of the total harvest went into wood products with an MRT of 25–43 years, and only 22% was used as construction wood and glued wood, products with the longest MRT (50 years). The average MRT of carbon in harvested wood products was 20 years. Thinning from above throughout the rotation of spruce forests would lead to an average MRT in harvested wood products of about 23 years, thinning from below of about 18 years. A comparison of our calculations with estimates that resulted from the products module of the CO2FIX model (Nabuurs et al. 2001) demonstrates the influence of regional differences in forest management and wood processing industry on the lifetime of harvested wood products. To our knowledge, the present study provides for the first time real carbon inputs of a defined forest management unit to the wood product sector by linking data on raw timber production, timber sales and wood processing. With this new approach and using this data, it should be possible to substantially improve the net-carbon balance of the entire forestry sector.     

Hygienic acceptance of wood in food industry

Food is physically manipulated by other materials during production processes, and therefore, food quality and safety are vital in processes where foods are in contact with various materials. Wooden frames were used for centuries for dried egg pasta trays; however, with the development of different materials, wood was slowly abandoned and replaced by plastic. Nevertheless, there are some hygienic considerations concerning plastic frames in the dried egg pasta making industry. In this study, plastic and wooden trays were analysed by swabbing (n?=?210) and evaluated in regard to total number of aerobic counts (TAC), Enterobacteriaceae, Escherichia coli, moulds, yeasts and Staphylococcus aureus using dry medium plates. The aims of the research were to (1) evaluate the total number of microorganisms on wood and plastic material used for pasta trays and (2) make a hygienic evaluation of analysed materials for application in the pasta industry. The research was aimed to answer the question, ‘Does the tray material and/or location of the swab sample influence the colony forming unit (CFU)/20?cm²?’ Results showed a statistical difference in CFU/20?cm² for all bacterial determinations, except for E. coli which was not detected in swabs taken from wooden or plastic trays. This hygiene evaluation study supported the conclusion that the use of wood is appropriate in the food industry from a hygienic and technological point of view.     

The effect of surface fire on tree ring growth of <Emphasis Type="Italic">Pinus radiata</Emphasis> trees

Key message

Pinus radiata trees showed significantly reduced basal area increments and increased latewood/earlywood ratios, when their stem was charred by surface fires even if no needle damage occurred. An interaction of fire damage and precipitation on growth was observed.

Context

Heat from forest fires is able to penetrate beyond the bark layer and damage or completely kill a tree’s cambium. Short-term growth reductions following surface fires have been reported for some species. However, most studies have in common that they describe a compound effect of stem and foliage damage.

Aims

This study investigated the impact of surface fires on the radial growth of Pinus radiata, where only the stem of trees was charred, while no needle damage was recorded.

Methods

Tree ring measurements were performed on cores obtained at breast height. Analysis of variance and tests, based on annual basal area increment values were calculated to quantify pre- and post-fire growth differences of tree ring width and latewood/earlywood ratios.

Results

The analysis revealed significant growth reductions following a surface fire on P. radiata in the year on which the fire occurred as well as in the following year. As a consequence of the fire, basal area increment and latewood/earlywood ratios were significantly reduced. An interaction of fire damage and precipitation on growth was observed.

Conclusion

The obtained results show how fires without crown damage can affect growth and tree ring structure of P. radiata trees and indicate that stem char could be associated with a significant decrease in ring width and latewood/earlywood ratio.

     

Induction of photosynthesis and importance of limitations during the induction phase in sun and shade leaves of five ecologically contrasting tree species from the temperate zone

We examined the principal differences in photosynthetic characteristics between sun and shade foliage and determined the relative importance of biochemical and stomatal limitations during photosynthetic induction. Temperate-zone broadleaf and conifer tree species, ranging widely in shade tolerance, were investigated from one locality in the Czech Republic. The study species included strongly shade-tolerant Abies alba Mill. and Tilia cordata Mill., less shade-tolerant Fagus sylvatica L. and Acer pseudoplatanus L. and sun-demanding Picea abies (L.) Karst. In the fully activated photosynthetic state, sun foliage of all species had significantly higher maximum CO(2) assimilation rates, maximum stomatal conductance and maximum rates of carboxylation than shade foliage. Compared with shade leaves, sun leaves had significantly higher nocturnal stomatal conductances. In all species, shade foliage tended to have higher induction states 60 s after leaf illumination than sun foliage. Sun and shade foliage did not differ in the rate of disappearance of the transient biochemical limitation during the induction phase. Longer time periods were required to reach 90% photosynthetic induction and 90% stomatal induction in sun foliage than in shade foliage of the less shade-tolerant F. sylvatica and A. pseudoplatanus and in sun-demanding P. abies; however, in sun foliage of the strongly shade-tolerant species T. cordata and A. alba, the time needed for photosynthetic induction was similar to, or less than, that for shade foliage. Shade but not sun needles of P. abies and A. alba had significantly slower induction kinetics than the broadleaf tree species. Among species, the sun-demanding P. abies exhibited the shortest stomatal induction times in both sun and shade leaves. Independently of shade tolerance ranking, the transient stomatal and total limitations that characterize photosynthetic induction were relieved significantly earlier in shade foliage than in sun foliage. Sun foliage generally exhibited a hyperbolic photosynthetic induction response, whereas a sigmoidal induction response was more frequent in shade foliage. The different relative proportions of transient biochemical and stomatal limitations during photosynthetic induction in sun and shade foliage indicate an essential role of stomata in photosynthetic limitation during induction, mainly in shade foliage, with a consequent influence on the shape of the photosynthetic induction curve.     

Effects of drought and rewatering on growth and transpiration in European beech seedlings late in the growing season

Drought stress is one of the most important environmental factors affecting plant growth and survival. To date, most studies aim at understanding of post-stress physiological and anatomical adaptation to drought stress; however only few studies focus on plant recovery. In the present study, transpiration, shoot water potential, and anatomical and morphological measurements were performed on 4-year-old European beech seedlings with fully developed leaves. The seedlings were exposed to three levels of soil water potential (well-watered, moderate drought stress and severe drought stress) and followed by rewatering under greenhouse conditions. Reduced transpiration rates were observed in the stressed seedlings as a response to drought stress, whereas anatomical and morphological variables remained unchanged. Three days after rewatering, transpiration rates in both moderately and severely stressed seedlings recovered to the levels of those of well-watered seedlings. Drought stress promoted leaf budding, resulting in higher shoot dry mass of stressed seedlings. Our findings indicate that anatomical and morphological adaptations of European beech seedlings to drought stress are visibly limited during late-season growth stages. These results will help us to further understand factors involved in drought adaptation potential of European beech seedlings faced with expected climate-related environmental changes. To complete our findings, further experiments on plant recovery from drought stress should be focused on different periods of growing season.     

To Join Small-Scale Forest Owners’ Associations or Not? Motivations and Opinions of Small-Scale Forest Owners in Three Selected Regions of the Czech Republic

This article analyses motivations and attitudes of small-scale forest owners in the Czech Republic towards joining associations. The research is a follow-up to a field investigation performed within the National Forest Programme II for 2007–2013 in the Vyso?ina region in 2010. The present research was carried out in the Pilsen region in 2012 and the Central Bohemia region in 2015, applying the same method of investigation as in 2010—a questionnaire survey. The findings are based on the results of all three surveys and supported by the analysis of legal and forestry-related documents concerning financial subsidies for forest owners’ associations. The study has revealed reluctance of small-scale owners to join associations. Their lack of motivation is caused by insufficient funding from the government supporting the administration and management of associations. The reluctance also results from the request for associations to be legal entities, which most applicants do not meet as they are either not registered or are registered under unsuitable legal forms. Between 2011 and 2013, no contributions were paid by the government to associations, and no new small-scale forest owners’ associations were formed. To increase associations, we propose that the government should provide sufficient funding not only for the administration and management of associations but also for the process of establishing associations and initial investments. It is also necessary to make major innovations in legislature regarding the transition of ownerships to more convenient legal forms.