Effect of simulated acid rain on mycorrhizal infection of Pinus strobus L.

Mycorrhizal infection but not growth of white pine seedlings was reduced by application of simulated rain at pH 3.5 at 3 times ambient rates to plants grown in steamed Mardin soil inoculated with Pisolithus tinctorius. In unsteamed Mardin soil, the simulated acid rain at 3 times ambient rates had no effect on mycorrhizal infection or growth of pine seedlings if the rain was applied to the plants and soil or to only the soil before planting, except that nitrate-containing acid rain increased growth, infection and N content. In limed Mardin soil, the simulated acid rain reduced mycorrhizal infection if applied to the plants and soil as the seedlings were growing but not if applied to the soil before planting. Application of pH 3.5 rain at ambient rates had no detectable influence on mycorrhizal infection in 6 of 9 soils tested, but it stimulated infestion in 3 soils if the simulated rain contained only sulfate and in 1 soil if it had both sulfate and nitrate.     

After effects of metals derived from a highly metal-polluted sludge on maize (Zea mays L.)

High Cd and Ni concentrations in sandy soils were built up in a field experiment, receiving an unusually metal-polluted sewage sludge between 1976 and 1980, at Bordeaux, France. The study evaluates the availability of metals and their after effects on maize at one point in time, the 8th year following termination of sludge application (1988). Plant parts (leaves, stalks, roots, grains) and soil samples were collected from plots which received 0 (Control), 50 (S1) and 300 Mg sludge DW ha^?1 (S2) as cumulative inputs. Dry-matter yield, plant metal concentrations, total, and extractable metals in soils were determined. Metal inputs resulted in a marked increase in total and extractable metals in soils, except for extractable Mn and Cu with either 0.1 N Ca(NO₃)₂ or 0.1 N CaCl₂. Total metal contents in the metal-loaded topsoils (0–20 cm depth) were very often lower, especially for Cd, Zn, and Ni, than the expected values. Explanation was partly given by the increases of metal contents below the plow layer, particularly for Cd at the low metal loading rate, and for Cd, Ni, and Cu at the high one (Gomez et al., 1992). In a control plot beside a highly metal- polluted plot, Cd, Zn, and Ni concentration in soil increased whereas the concentration of other metals was unchanged; lateral movement, especially with soil water, is plausible. Yield of leaves for plants from the S2 plot was reduced by 27%, but no toxicity symptoms developed on shoots. Yields of stalks for plants in both sludge-treated plots numerically were less than the controls but the decrease was not statistically significant. Cd and Ni concentrations increased in all plant parts with metal loading rate while Mn concentrations decreased. Leaf Cd concentration in plants from sludge-treated plots (i.e. 44 and 69 mg Cd kg^?1 DM for S1 and S2) was above its upper critical level (i.e. dry matter yield reduced by 10%: 25μg Cd g^?1 DM in corn leaves, Macnicol and Beckett, 1985). Yield reduction at the high metal-loading rate was probably due to 3 main factors: Mn deficiency in leaves, the accumulation of Ni especially in roots, and the increase of Cd in leaves. The amount of metal taken up by plants from the control plot ranked in the following order (mole ha^?1): Fe(22)? Mn(7)>Zn (5.6)?Cu (0.7), Ni (0.6), Cd (0.4). For sludge-treated plots, the order was (values for S1 and S2 in mole ha ^?1): Fe (16, 15)>Zn (7.9, 7.7)>Ni (4.3, 4.7)>Cd (1.9, 2.1)>Cu (1.0,1.2), Mn (1.5, 1.1). Zn and Cd had the greatest offtake percent from the soil to the above ground plant parts. Cd or Ni uptake by maize were correlated with extractable metals by unbuffered salts (i.e. 0.1 N Ca(NO₃)₂ and 0.1 N CaCl₂). It is concluded that part of the sludge-borne Cd and Ni can remain bioavailable in this sandy soil for a long period of time (e.g. 8 yr) after the termination of metal-polluted sludge application.     

Second-harmonic generation from magnetic metamaterials

We observe second-harmonic generation from metamaterials composed of split-ring resonators excited at 1.5-micrometer wavelength. Much larger signals are detected when magnetic-dipole resonances are excited, as compared with purely electric-dipole resonances. The experiments are consistent with calculations based on the magnetic component of the Lorentz force exerted on metal electrons-an intrinsic second-harmonic generation mechanism that plays no role in natural materials. This unusual mechanism becomes relevant in our work as a result of the enhancement and the orientation of the local magnetic fields associated with the magnetic-dipole resonances of the split-ring resonators.     

Characteristic site disturbance due to harvesting and extraction machinery traffic on sensitive forest sites with peat soils

The effects of wood harvesting and extraction machinery traffic on sensitive forest sites with peat soils were characterised with the objective of quantifying the threshold levels beyond which significant site impacts (compaction and rutting) would occur. The treatments involved running the machines in selected extraction racks (i.e., 3 m wide machine routes) while conducting normal wood thinning and extraction operations comprising one and two passes by the harvester and the forwarder with full payload, respectively. Soil disturbance thresholds were established by testing the level of significance of the difference in induced soil damage and compaction before and after machine traffic treatments. For volumetric soil water content lying between 10.0 and 14.9%, threshold cone penetration resistance levels for two 600/55–30.5 tyres were found to range from 594 to 640 kPa for deep-raised peat soil with initial strength lying between 524 and 581 kPa. In general, the proportion of the total rut depth data in each rack that exceeded the threshold level of 21.5 cm was about 5%. The threshold value corresponds to sinkage equivalent to 15% of the overall wheel diameter of the harvester, above which machine mobility would be hampered considerably. In addition, after harvester traffic the mean rut depth per unit rack length was 10.2×10⁻² cm/m, and it ranged from 0.7 to 24.7×10⁻² cm/m.     

Development of the polysaccharidic matrix in biocrusts induced by a cyanobacterium inoculated in sand microcosms

Soil inoculation with cyanobacteria (cyanobacterization) is a biotechnological method widely studied to improve soil quality and productivity. During their growth on soil, cyanobacteria excrete exopolysaccharides (EPSs) which glue trichomes to soil particles, in a three-dimensional extracellular polymeric matrix. EPS productivity is an important screening parameter to select proficient inoculants and is affected by growth conditions and abiotic stresses. In this study, we evaluated the capability of the cyanobacterium Schizothrix cf. delicatissima AMPL0116 to form biocrusts when inoculated in sand microcosms under stressing conditions, and the characteristics of the synthesized polymeric matrix. In parallel, we evaluated the characteristics of exopolysaccharidic exudates of the strain when grown in liquid culture, under optimal growth setting. Our results pointed out at significant differences of the exopolymers produced in the two conditions in terms of monosaccharidic composition and molecular weight distribution, and proved the capability of S. cf. delicatissima AMPL0116 to form stable bioaggregates on sandy soils.     

Field effectiveness and biodegradation of cyclic imides in lettuce field soils

When 42 field trials, carried out from 1975 to 1989 in the Perpignan region (France) for control of lettuce drop caused by Sclerotinia minor, were compared, a decrease in the field effectiveness of cyclic imides was perceptible, beginning approximately in 1985. Moreover, in 15 out of 46 commercial lettuce fields surveyed in 1988 and 1989, the effectiveness of iprodione was less than 80%, the level of acceptability for the growers. In these fields, fungicide degradation, estimated by 3,5-dichloroaniline formation, was faster than in soils in which S. minor was adequately controlled. Statistical analyses showed that the iprodione degradation index was strongly linked to the history of fungicide treatment and was weakly correlated to soil pH or clay content. All the fields characterized by low iprodione effectiveness were associated with high levels of fungicide treatment and high degradation index. Moreover, we observed that soil from a field which had received iprodione for more than ten years did not degrade vinclozolin quickly, while soil from another part of the same field which had been treated with vinclozolin for eight years degraded vinclozolin faster than iprodione.     

Factors associated with the clinical diagnosis of foot and mouth disease during the 2001 epidemic in the UK

The purpose of this investigation was to identify factors associated with the clinical diagnosis of foot and mouth disease during the 2001 epidemic in the United Kingdom. Using logistic regression, we compared: (1) reports of suspect disease that resulted in the declaration of FMD to reports that did not, and (2) laboratory-positive cases to laboratory-negative cases. From 6,801 reports of suspect disease, 2,026 cases of FMD were identified. Suspect cases were more likely to become clinical cases if: (1) the report originated from the disease control authorities ('active surveillance') rather than the public, usually farmers ('passive surveillance'); (2) cattle were the species suspected of disease, as opposed to sheep; (3) the report was filed during the peak of the epidemic; (4) the reporting premises was within 3 km of an FMD case detected within the previous 2 weeks; or (5) the report originated from certain local disease control centres. There were significant two-way interactions between: type of surveillance and species suspected of disease, type of surveillance and proximity of other infected premises, species suspected and time in the epidemic, and time in the epidemic and proximity of other infected premises. Clinical cases were more likely to be laboratory positive if: (1) they were found by passive versus active surveillance, (2) cattle were suspected of disease (versus sheep), (3) oldest lesions were less than 3 days, (4) the report was filed at any time other than the peak of the epidemic, or (5) the report originated from certain local disease control centres. Significant two-way interactions were found between: type of surveillance and species suspected of disease, and type of surveillance and time in the epidemic.     

Angiographic Anatomy of External Iliac Arteries in the Sheep

External iliac artery atherosclerotic disease and aneurism occur in man. For treatment, imaging is required to facilitate minimally invasive introduction and advancement of stents within the intended vessels. Sheep are commonly used to test and improve stents. However, little information is published regarding the angiographic anatomy of the iliac arteries in the ovine species. The objective of this study was to describe the angiographic anatomy of the iliac arteries in the sheep. Computed tomography (CT) angiography and gross anatomical dissection were performed in, respectively, 10 and 43 adult ewes. Diameters and lengths of the arteries were measured. In comparison with man, salient anatomical differences were identified in the sheep: (1) the absence of common iliac arteries, (2) the common trunk at the origin of internal iliac arteries and (3) the location of the bifurcation of the external iliac arteries into femoral arteries in the pelvis (not in the limb). External iliac arteries in this series of sheep were 86 mm long in average and had a mean diameter of 7.5 mm. Lengths of arteries are only slightly different between man and sheep, while diameters are rather similar. Therefore, the sheep model appears to be sufficiently similar to man to test stent properties. This study provides useful reference images and measures of lengths and diameters of relevant arteries that could be applied to research with ovine models.     

Oxidative degradation of lipids during mashing

Although hardly any polyunsaturated fatty acids (PUFAs) are present in the endproduct, the ingredients used for the production of beer contain a high concentration of PUFAs, such as linolic and linolenic acid. These compounds are readily oxidized, resulting in the formation of lipid-derived products that reduce the taste and quality of beer enormously. During mashing relatively high amounts of PUFAs are exposed to atmospheric oxygen at a relatively high temperature. This makes mashing a critical step in the brewing process with regard to the formation of lipid-derived off-taste products. F1 phytoprostane (PPF1) changes in antioxidant capacity and monohydroxy fatty acids (OH-FAs) were used as markers for the detection of oxidative damage to fatty acids during mashing. The pattern of OH-FA formation indicates that enzymatic oxidation of PUFAs is more important than nonenzymatic oxidation during the mashing process. Nevertheless, substantial nonenzymatic radical formation is evident from the increase of specific OH-FAs and PPF1s. It was found that a low oxygen tension reduces oxidative damage and gives a high antioxidant capacity of the mashing mixture. This indicates that mashing should be done under low oxygen pressure.