Arsenic Mining Waste in the Catchment Area of the Madrid Detrital Aquifer (Spain)

In recent years, elevated arsenic concentrations in groundwater used for drinking water supplies have been recognised in the Madrid Tertiary detrital aquifer. Although only natural causes have been suggested as the source of arsenic, this study aims to highlight that the anthropogenic contribution cannot be disregarded. During the sub-catchment??s areas sampling, we found many geographical sites where natural arsenopyrite [FeAsS] originally encapsulated in pegmatite bodies and quartz veins, was artificially outcropped and dumped out, since mining wastes were scattered and exposed to weathering. Several mineral and ground specimens were collected to analyse its mineralogical and chemical composition by X-Ray Diffraction (XRD) and X-Ray Fluorescence (XRF) spectrometry and by Environmental Scanning Electron Microscope (ESEM). Both, the abundant existence of secondary phases, such as scorodite [FeAsO₄?2H₂O] and jarosite [KFe₃(SO₄)₂(OH)₆], much more soluble than arsenopyrite, and the lixiviation experiments of arsenopyrite in acidic media to simulate acid mine drainage (AMD) conditions, usually found in old mining districts, point to a potential risk of arsenic contamination of surface water bodies, which operate as recharged waters of the aquifer in the studied area. The elemental determination of heavy metals present in ground samples by XRF analyses, reaching up to 1,173 mg kg^?C1 of copper, 347 mg kg^?C1 of lead and 113,702 mg kg^?C1 of arsenic; and the physicochemical and arsenic fractionation studies of soil samples, led us to classify the soil as Spolic Technosol (Toxic). The contamination of the area due to old mining activities could release arsenic to Madrid water supplies; accordingly, additional decontamination studies should be performed.     

Investigations of the pore-size distribution of wood in the dry and wet state by means of mercury intrusion porosimetry

This paper deals with the determination of the pore-size distribution of untreated and thermally modified twin samples of Norway spruce (Picea abies (L.) Karst.) and sycamore maple (Acer pseudoplatanus L.) by means of mercury intrusion porosimetry. The investigations considered oven-dried and at 22 °C and 95 % relative humidity-conditioned samples. A special sample holder and a novel method for evacuation were developed for the measurements. This was necessary both to ensure that samples were positioned at a defined distance and the conditioned samples did not dry in an uncontrolled manner. The results clearly show that the climatic state influences the results. Thermal modification greatly alters the pore-size distribution of spruce. This can be largely attributed to the formation of intercellular spaces in the middle lamella as a result of cell-wall compression due to thermal modification. The alteration of the pore structure of maple due to thermal modification is not as pronounced as that of spruce.     

Stand structure of an uneven-aged fir–beech forest with an irregular diameter structure: modeling the development of the Belevine forest, Croatia

This study focuses on the problem of irregular diameter structure in a silver fir–beech selection (plenter) forest with a “surplus” of large diameter trees and a lack of natural regeneration and small diameter trees. We sampled 274 plots (900 m² each) in the Belevine research site (266.24 ha) in the mountain region Gorski Kotar (Croatia), where diameter (dbh) distribution, diameter increment, and natural regeneration were analyzed in detail. A low density of natural regeneration, weak annual recruitment of small (10 cm dbh) diameter trees (only five trees per hectare), delayed diameter growth of trees, and a low annual rate of trees reaching the next dbh class were attributed to the current irregular dbh structure. The stand development prediction for the next 50 years is based on a simulation model, which considers the current diameter structure, increment, recruitment, and future cutting regime. Intensive cutting in the first of five 10-year cutting cycles (intensity higher of 25%) is needed to initiate natural regeneration and to accelerate growth of young silver fir trees. In the next 50 years, the irregular diameter structure will be gradually improved.     

Post-fire production of mushrooms in Pinus pinaster forests using classificatory models

This study was aimed at describing post-fire mushroom production in a Mediterranean ecosystem dominated by Pinus pinaster Ait. in the northwest of Spain and assessing the results by classificatory models. During the autumn periods of 2003–2006, fruit bodies from 115 fungal taxa were collected in burned and unburned areas and were further grouped into the following categories: saprotrophic/mycorrhizal; and edible/non-edible. After wildfires, a significant reduction in the number of fungal species and fruit body biomass production was observed. Based on this relevant information, the first simple classificatory model for this aim is provided. Nine alternative models based on classifications according to combinations of edibility and functional groups were fitted, and four fruiting body biomass production classes were defined as possible responses. As explanatory factors, time after fire and climatic variables significantly related to fruit body production were included. The best predictive results were obtained for edible and edible-mycorrhizal models, for which the correct classification rate of production classes was between 92 and 85 %. Moreover, the models obtained were applied to analyse the effect of time after fire on fungal production. Mycorrhizal and edible fungal production after fire was classified into the lowest class, whereas saprotrophic and non-edible species followed a contrary trend. The classificatory models can be useful to optimise management and harvest of these increasingly appreciated non-timber forest resources.     

The North American long-term soil productivity experiment: Findings from the first decade of research

First decade findings on the impacts of organic matter removal and soil compaction are reported for the 26 oldest installations in the nation-wide network of long-term soil productivity sites. Complete removal of surface organic matter led to declines in soil C concentration to 20 cm depth and to reduced nutrient availability. The effect is attributed mainly to the loss of the forest floor. Soil C storage seemed undiminished, but could be explained by bulk density changes following disturbance and to decomposition inputs of organic C from roots remaining from the harvested forest. Biomass removal during harvesting had no influence on forest growth through 10 years. Soil compaction effects depended upon initial bulk density. Soils with densities greater than 1.4 Mg m⁻³ resisted compaction. Density recovery was slow, particularly on soils with frigid temperature regimes. Forest productivity response to soil compaction depended both on soil texture and the degree of understory competition. Production declined on compacted clay soils, increased on sands, and generally was unaffected if an understory was absent.     

Development of a stand density management diagram for even-aged pedunculate oak stands and its use in designing thinning schedules

Density management is the usual method used by silviculturiststo achieve a desired future stand condition, and one of themost effective methods of design, display and evaluation ofalternative density management regimes in even-aged stands isthe use of stand density management diagrams. In the presentstudy, we describe a method for developing thinning schedulesfor even-aged pedunculate oak (Quercus robur L.) stands in Galicia(north-western Spain), using a density management diagram. Thediagram integrates the relationships among stand density, dominantheight, quadratic mean diameter and stand volume in a singlegraph. The data used in its construction were obtained from172 sample plots located throughout Galicia. The diagram isbasically composed of two equations: the first relates the quadraticmean diameter to the stand density and dominant height; thesecond relates the stand volume to the quadratic mean diameter,stand density and dominant height. These equations were fittedsimultaneously using full information maximum likelihood. Therelative spacing index is used to characterize the growing stockand the diagram provides isolines for dominant height, numberof trees per hectare, quadratic mean diameter and stand volume.Dominant height isolines together with the site index curvesallow specification of the timing of thinnings while intermediateand final harvest volumes are calculated using the stand volumesisolines.     

Analysis of tree interactions in a mixed Mediterranean pine stand using competition indices

Studying species interactions in mixed forests allows us to assess their potential benefits and adapt current silvicultural tools developed in monospecific stands to multi-specific stands. We analyzed tree interactions in a Pinus halepensis Mill. and Pinus pinea L. mixed plantation using individual tree neighborhood models and competition indices that accounted for symmetric and asymmetric competition, to analyze whether the growth of each species was better explained by symmetric or asymmetric competition. We also split the competition indices into their intra- and interspecific forms, to test for competition effects on growth change based on competitor identity. Finally, we analyzed whether P. halepensis and P. pinea trees had different growth responses to competition. When calculating competition indices, we explored how spatial information and size of competitor trees contributed to the quantification of the process. Competition measurements were optimized to more precisely describe interactions. Results showed that the inclusion of competition indices generated important improvements in growth models. The main mode of competition was symmetric, which could be related to water restrictions typical of the Mediterranean climate. Considering competitor identity did not improve the growth models, while measurement without discriminating competitors by species generated more parsimonious models. P. halepensis and P. pinea trees had similar growth responses to competition, indicating that the two species cope with competition in similar ways. However, P. pinea showed lower average growth than P. halepensis in the period analyzed. Results suggest that preventing the onset of intense interspecific competition processes could help slow down the long-term replacement of P. pinea by P. halepensis and could have benefits for silvicultural management in systems with two species that share ecological niches but are capable of generating different goods and services.