Negative charge — pH dependence of organic matter of forest soil under influence of liming as determined from titration curves

The dependences between negative charge and pH for organic matter of limed and unlimed profiles of sandy acidic forest soils were determined on the base of ion exchange and titration curves measurements. Subtracting the titration curves of the supernatant from the titration curves of the respective suspensions the quantities of base consumed by solid phases were determined. They were interpreted in terms of negative charge after corrections with the quantities of initial exchangeable basic cations and exchangeable hydrogen. For investigated organic material the charge increased slowly in acidic pH region and much faster in alkaline pH region. The zones of the fast increase of charge occured at higher pH's for deeper horizons, enriched with fulvic acids. The observed changes of organic matter charge due to liming were related to the increase of fulvic to humic acids ratio. The negative charges of organic matter in limed and unlimed profiles estimated for high pH were better correlated with fulvic to humic acids ratio than when estimated for lower pH levels.     

UN ECE ICP Materials: Dose-Response Functions on Dry and Wet Acid Deposition Effects After 8 Years of Exposure

The main results of the International Co-operative Programme on Effects on Materials, including Historic and Cultural Monuments (ICP Materials) within the United Nations Economic Commission for Europe (UN ECE) are summarised. The 8-year field exposure programme involves 39 test sites in 12 European countries and in the United States and Canada. Dose-response functions (DRF) expressing the effect of dry and wet deposition as individual terms have been obtained for a wide range of materials including bronze, copper, weathering steel, zinc, aluminium, nickel, tin, stone materials, paint coatings and glass materials. The DRF's includes parameters that are easily available on different geographical scales and can be used for mapping areas of increased corrosion rates and for calculation of costs.     

High-resolution nuclear magnetic resonance spectroscopy and multivariate analysis for the characterization of beer

Beer contains a very complex mixture of nutrients, which in this work are identified to some extent by high-field high-resolution nuclear magnetic resonance (NMR) one- and two-dimensional methods. The (1)H NMR spectrum of beer shows a predominance of strongly overlapped peaks arising from several carbohydrates. Minor components are clearly observed both in the aliphatic and in the aromatic regions of the spectrum. With the aid of two-dimensional methods, spectral assignment was carried out, enabling the identification of approximately 30 compounds and identifying about the same number of spin systems for further assignment. The variability of the spectral profile of beers differing in type and label was studied by principal component analysis (PCA), and it was found that, although some distinction is achieved on the basis of the aliphatic and sugar compositions, clearer separation between ales and lagers is obtained by PCA of the aromatic profiles alone. The potential of this technique as a rapid and informative quality control tool is discussed.     

Untersuchungen zur ökologischen situation ostdeutscher landwirtschaftsbetriebe

Repräsentative ostdeutsche Landwirtschaftsbetriebe sind hinsichtlich ihrer Umweltverträglichkeit bewertet worden. Dazu diente eine Methode, die für ca. 30 relevante Umwelt‐Gefährdungspotentiale aus den Bereichen Düngung, Bodenschutz, Pflanzenschutzmitteleinsatz, Agrarraumgestaltung, Artendiversität, Energiebilanz und Tierbesatz kritische Umweltbelastungen formuliert und damit aktuelle Betriebsdaten wertend vergleicht.

Die Ergebnisse zeigen eine sehr differenzierte Situation. Während Stoffbelastungen mit Konsequenzen für die Nahrungsqualität weitgehend unkritisch sind, bestehen Defizite vor allem als “Altlasten”; in den Bereichen Bodenschutz und Agrarraumgestaltung.

Beziehungen zwischen Intensität und Umweltverträglichkeitsbewertung werden diskutiert.     

Comparison of critical limits for crop plant growth based on different indicators for the state of soil compaction

Soil compaction affects physical soil condition, in particular aeration, soil strength, and water availability and has adverse effects on plant growth. Bulk density is the most frequently used indicator to describe the state of compaction of a soil. However, this parameter lacks a direct functional relationship with plant growth. Various indicators have been proposed to simultaneously characterize the state of compaction of agricultural soil and its suitability for plant growth. This paper examines and compares the critical limits for crop plant growth based on three of these indicators: packing density, least limiting water range, and S parameter (the latter is the slope of the soil water‐retention curve in the inflexion point). In a first step, we reviewed the literature for published optimum and limiting values of bulk density and found that these values were highly dependent on clay and silt content. Converting them into corresponding values of packing density (composite index of bulk density and clay content), a value of 1.70 was found to effectively distinguish between optimum and limiting soil conditions for plant growth. In a second step, the packing density of 59 soil horizons sampled in N Switzerland was compared with the least limiting water range and the S parameter of these soil horizons (both determined by means of pedotransfer functions taken from the literature). A linear relationship between the three parameters was found, which allowed for a comparison of the published critical limits for plant growth based on these parameters. The critical limits of the three indicators, which had been postulated independently of each other in the literature, were found to agree well with each other. This means that all of them could equally be used to describe the compaction state of a soil and its physical suitability for plant growth. However, the proposed critical limits of packing density, least limiting water range, and S parameter still need further validation by field studies relating plant growth to soil compaction.     

Improving quality of composted biowaste to enhance disease suppressiveness of compost-amended, peat-based potting mixes

Biowaste can be converted into compost by composting or by a combination of anaerobic digestion and composting. Currently, waste management systems are primarily focused on the increase of the turnover rate of waste streams whereas optimisation of product quality receives less attention. This results in low quality composts that can only be sold on bulk markets at low prices. A new market for quality compost could be potting mixes for horticultural container-grown crops to partially replace non-renewable peat and increase the disease suppressiveness of potting mixes. We report here on the effect of wetsieving biowaste prior to composting on compost quality and on disease suppressiveness against the plant pathogen Pythium ultimum of peat mixes amended with this compost. The increased organic matter and decreased salt content of the compost allow for significantly higher substitution rates of peat by compost. In this study up to 60% v/v compost peat replacement did not affect cucumber growth. However, disease suppressiveness of the potting mixes strongly increased from 31 to 94% when the compost amendment rate was increased from 20 to 60%. It was shown that general disease suppression for P. ultimum can only be effective when the basal respiration rate is sufficiently high to support microbial activity. In addition, organic matter of the compost should reach a sufficient stability level to turn from disease conducive to disease suppressive. Increasing the compost addition from 20 to 60% did not significantly affect plant yield, yield variation were due to differences in nutrient levels. It can be concluded that compost from wetsieved biowaste has high potential to replace peat in growing media for the professional market.     

Effects of draught load exercise and training on calcium homeostasis in horses

This study was conducted to investigate the effects of draught load exercise on calcium (Ca) homeostasis in young horses. Five 2-year-old untrained Standardbred horses were studied in a 4-month training programme. All exercise workouts were performed on a treadmill at a 6% incline and with a constant draught load of 40 kg (0.44 kN). The training programme started with a standardized exercise test (SET 1; six incremental steps of 5 min duration each, first step 1.38 m/s, stepwise increase by 0.56 m/s). A training programme was then initiated which consisted of low-speed exercise sessions (LSE; constant velocity at 1.67 m/s for 60 min, 48 training sessions in total). After the 16th and 48th LSE sessions, SETs (SET 2: middle of training period, SET 3: finishing training period) were performed again under the identical test protocol of SET 1. Blood samples for blood lactate, plasma total Ca, blood ionized calcium (Ca(2+)), blood pH, plasma inorganic phosphorus (P(i)) and plasma intact parathyroid hormone (PTH) were collected before, during and after SETs, and before and after the first, 16th, 32nd and 48th LSE sessions. During SETs there was a decrease in ionized Ca(2+) and a rise in lactate, P(i) and intact PTH. The LSEs resulted in an increase in pH and P(i), whereas lactate, ionized Ca(2+), total Ca and intact PTH were not affected. No changes in Ca metabolism were detected in the course of training. Results of this study suggest that the type of exercise influences Ca homeostasis and intact PTH response, but that these effects are not influenced in the course of the training period.     

Early pathogen detection under different water status and the assessment of spray application in vineyards through the use of thermal imagery

Remote detection using thermal imagery has potential for use in the pre-symptomatic diagnosis of abiotic stress or of early disease detection. The latter is an issue of great importance since late detection of fungus attacks or poor spray coverage are major factors contributing to weak disease control affecting fruit quality or reducing yield in grapes. In greenhouse experiments the effects on spatial and temporal variability of leaf temperature of grapevine (Vitis vinifera L. cv. Riesling) leaves inoculated with a fungal pathogen (Plasmopara viticola (Berk. & Curt. Ex de Bary) were studied in either well-irrigated or non-irrigated potted plants. Due to the high sensitivity of leaf temperature to the amount of water transpired, infra-red thermography can be used to monitor irregularities in temperature at an early stage of pathogen development. Evidence for characteristic thermal responses in grapevines was apparent well before visible symptoms appeared. Contrasting thermal effects due to the pathogen attack were found between measurements on well-irrigated and water-stressed plants. Furthermore, from a technical point of view, thermal imagery has the potential to assess the evenness of spray coverage within a canopy, hence optimizing pesticide application efficiency.     

Soil physical characteristics of peat soils

Drainage and intensive use of fens lead to alterations in the physical characteristics of peat soils. This was demonstrated using parameters of water balance (available water capacity) and the evaluated unsaturated hydraulic conductivity. Deriving the distribution of the pore size from the water retention curve was flawed because of shrinkage due to drainage, especially at high soil water potentials. These errors became greater as the peat was less influenced by soil‐genetic processes. The water retention curves (desorption) evaluated in the field and the laboratory satisfactorily corresponded. However, the wetting‐ and drainage‐curves obtained in the field differed up to 30 vol.‐% water content at same soil water potentials. These differences were largely due to a wetting inhibition.