STUDIES ON DIFFERENTIAL RESPONSE OF SPRING CANOLA CULTIVARS TO BORON TOXICITY

Although many states recommend boron (B) fertilizer for many field crops, information about B toxicity of canola is lacking. This experiment was carried out at Central Anatolia, Turkey from 2002 to 2003, to determine genotypic range in B efficiency of eight spring canola cultivars, to identify the B-inefficient cultivars and to identify specific responses. The cultivars were grown under B moderate deficiency (extractable B 0.56 mg kg^?1) and toxic B applied (15 kg B ha^?1) conditions. According to the results, seed yield varied significantly among the cultivars and B application decreased the seed yield by 31% on average. Also, toxic B application reduced protein and oil contents similar to seed yield, and increased leaf B concentration in all varieties. This study has shown that leaf B concentration has increased considerably when B is applied to Pactol and Star cultivars, but seed yield of +B and ?B has not shown significantly a change. It is possible to say that Star and Pactol—which have not been affected by the toxic B application—are genotypes that are tolerant to B toxicity and may be cultivated at B toxic lands.     

THE EFFECT OF NITROGEN SOURCES ON YIELD AND QUALITY OF SALAD ROCKET GROWN IN DIFFERENT MONTHS OF THE YEAR

The effects of months of the year and nitrogen (N) sources on salad rocket (Eruca sativa Mill.) yield, quality, and nitrate accumulation was investigated during the years 2002 and 2003. In both years, seeds were sown on the first day of April, May, June, July, August and September. Three different nitrogen sources were used: farmyard (cattle) manure (100 tonnes·ha^?1), calcium nitrate [Ca(NO₃)₂]-15.5% N (150 kg N·ha^?1) and ammonium sulfate [(NH₄)₂SO₄)]-21% N (150 kg N·ha^?1). Yield, leaf color, dry matter, vitamin C and total glucosinolate content and nitrate accumulation was assessed. Growing months affected all the assessed parameters significantly both years, with the exception of hue angle in 2003, whereas nitrogen source only influenced yield and nitrate accumulation in 2003. In both years the highest yield was obtained in April, but vitamin C and total glucosinolate contents were higher during summer months, and leaves were slightly darker colored. Chemical fertilizers increased the yield compared to farmyard manure; however, they also increased nitrate accumulation slightly, without any significant difference between them. Nitrate accumulation never exceeded 300 mg kg^?1 fresh weight (FW), which is well below the acceptable daily intake of 3.7 mg nitrate per kg^?1 bodyweight set by European Commission's Scientific Committee on Food.     

Population structure of Phytophthora infestans in Turkey reveals expansion and spread of dominant clonal lineages and virulence

Late blight, caused by the oomycete Phytophthora infestans, is considered the most important and destructive disease of potato in Turkey. In this study, characterization of 367 isolates of P. infestans obtained from the potato-growing areas of the country was carried out to evaluate the pathogen population structure over the 2017–2019 production seasons. The isolates were characterized by numerous features including mating type, in vitro mefenoxam sensitivity, simple-sequence repeat (SSR) markers, and virulence against a set of potato differential lines. Most isolates were A2 mating type (353 isolates). Also, 68% of isolates were resistant to mefenoxam; the remainder were intermediate in their sensitivity and there were no sensitive isolates. SSR-based genotypic analysis of P. infestans populations showed a low genetic diversity. The 13_A2 clonal lineage predominated with a frequency of 92.1%, followed by 34_A1 (3.3%) and 37_A2 (2.7%). Genotypes 34_A1 and 37_A2 were detected only in 2019. This is the first report of 34_A1 and 37_A2 clonal lineages causing late blight disease of potato in Turkey. The most abundant virulence type was one overcoming resistance genes R1, R2, R3, R4, R6, R7, R10, and R11. These results emphasized that the migration of individuals and the asexual generation of subclonal differences were the main factors driving the population structure of P. infestans in Turkey.     

Determination of Energy Use Efficiency and Greenhouse Gas (GHG) Emissions of Pistachio (Pistacia vera L.) Production in Adıyaman Province

The purpose of this research is to perform the energy use efficiency and greenhouse gas (GHG) emissions of pistachio production. This research was performed for 2016 and 2017 production season in Ad?yaman province of Turkey in dry conditions in 2017. The data supplied from research were collected from 152 different farms by face to face surveys with simple random sampling method. The agricultural input energies and output energies used in pistachio production were computed to determine the energy use efficiency. According to the research findings, the energy inputs in pistachio production were computed respectively as 4561.11?MJ ha^?1 (35.50%) diesel fuel energy, 3206.24?MJ ha^?1 (24.96%) chemical fertilizers energy, 2420.93?MJ ha^?1 (18.84%) machinery energy, 1020.06?MJ ha^?1 (7.94%) human labour energy, 715.69?MJ ha^?1 (5.57%) animal labour energy, 656.95?MJ ha^?1 (5.11%) farmyard manure energy and 266.16?MJ ha^?1 (2.07%) chemicals energy. Total input energy was computed as 12,847.14?MJ ha^?1. Energy values of pistachio yield were computed as 15,008.65?MJ ha^?1. Energy use efficiency, specific energy, energy productivity and net energy computations were computed respectively as 1.17, 22.32?MJ kg^?1, 0.04?kg MJ^?1 and 2161.51?MJ ha^?1. The consumed total energy input in pistachio production can be classified as 49.01% direct, 50.99% indirect, 18.62% renewable and 81.38% non-renewable. Total GHG emission was computed as 1123.72?kg CO_2?eqha^?1 for pistachio production with the greatest portions for human labour (32.42%). The human labour followed up chemical fertilizers usage (23.21%), diesel fuel consumption (19.89%), machinery usage (15.30%), farmyard manure usage (5.65%), chemicals usage (3.25%) and animal labour usage (0.27%), respectively. Additionally, GHG ratio value was computed as 1.95 kgCO_2?eqkg^?1 in pistachio production.

     

Biological features and life table parameters of the mealy plum aphidHyalopterus pruni on different apricot cultivars

Development, survival, reproduction rate, and population growth parameters of the mealy plum aphidHyalopterus pruni (Geoffroy) (Hom.: Aphididae) were evaluated on four different apricot cultivars (Tyrinte, Sakıt, Colomer, and Bebeco) under field conditions in the Van region of Turkey. Experiments were carried out on exterior leaves of trees, 1.5–2 m above the ground. Plexiglas clip-cells (25×6 mm) with the upper side covered by muslin were used in the experiments. The mealy plum aphid performed better on Tyrinte than on the other cultivars tested. The fastest development time (first instar to adult; 9.4 days), highest daily reproduction rate (2.6 offspring/aphid/day), and highest total fecundity (48.1 offspring/aphid) were obtained on Tyrinte. The intrinsic rate of increase — a good indicator of the growth potential of a population — of individuals fed on Tyrinte was significantly greater than that of individuals fed on cvs. Colomer and Bebeco. While mean generation times (T _o ) of populations on different cultivars were close to each other, the net reproductive rate was the highest (29.45 offspring/aphid/generation) on Tyrinte and the population doubling time on Tyrinte was 18.7%, 25.2% and 26.3% faster than those of individuals on other cultivars tested. The results obtained in this study indicated that Tyrinte appeared to be the most susceptible to the mealy plum aphid among the cultivars tested. http://www.phytoparasitica.org. posting Nov. 23, 2004.     

Trace Element Emissions from some Cement Plants in Turkey

The cement industry has been one of the major sources of air pollution in the past and the Turkish Air Quality Protection Regulation has issued limits also to trace elementemissions to minimise the polluting effects of this industrialsector. In the present study, dust samples were obtained isokinetically from 18 main stacks of 10 cement plants locatedin different geographical areas of Turkey. The samples were analysed for trace elements Hg, Cd, Cr, Pb, Ni, Se, Te, TI, V, Sb, Ba, Zn, Co, Sr, Cu, Bi, Mo, Be, and As. The results are presented both as concentration in the dust samples as well as emissions per unit production, and concentration inthe stack gas. The trace element emissions of the main stacksagree to great extent with the values given in the literature. On the other hand, the trace element emissions of the plants considered are well below the limits set in the Turkish Air Quality Protection Regulation.     

Markers of Borna disease virus infection in cats with staggering disease

Borna disease virus (BDV) is a RNA-virus causing neurological disorders in a wide range of mammals. In cats, BDV infection may cause staggering disease. Presently, staggering disease is a tentative clinical diagnosis, only confirmed at necropsy. In this study, cats with staggering disease were investigated to study markers of BDV infection aiming for improvement of current diagnostics. Nineteen cats fulfilled the inclusion criteria based on neurological signs and pathological findings. In 17/19 cats, BDV infection markers (BDV-specific antibodies and/or BDV-RNA) were found, and antibodies in serum (13/16, 81%) were the most common marker. BDV-RNA was found in 11/19 cats (58%). In a reference population without neurological signs, 4/25 cats were seropositive (16%). The clinical history and neurological signs in combination with presence of BDV infection markers, where serology and rRT-PCR on blood can be helpful tools, improve the diagnostic accuracy in the living cat.     

Staling Effects When Adding Low Amounts of Normal and Heat‐Treated Barley Flour to a Wheat Bread

The properties of a white wheat bread could be changed by adding normal or heat‐treated barley flour in small amounts (2 and 4%) to a white wheat bread recipe. Differences regarding gelatinization as well as retrogradation properties were found when analyzing the two flours in model systems. The heat‐treated flour was fully gelatinized due to prior time, temperature, and pressure treatment and could therefore absorb larger amounts of water than the other flours. In gelatinized model systems with 40% flour (dwb), the heat‐treated barley flour contained less retrograded amylopectin as compared with normal barley flour after storage for up to 14 days, whereas no differences were found with 20% flour (dwb). However, stored breads showed an increased retrogradation of amylopectin (as measured by differential scanning calorimetry [DSC]) when 2% pretreated barley flour was added as compared with addition of 2% normal barley flour. On the other hand, there were no significant differences at the 4% level. Addition of either of the barley flours resulted in less firm breads during storage as compared with the control breads. Increased water absorption in barley flour and thus increased water content in the breads or different water‐binding capacities of the flour blends could explain these results. The present study indicated that water had a stronger influence on bread firmness than the retrogradation of amylopectin. This conclusion was based on breads with pretreated barley flour being less firm than breads with normal barley flour, although the retrogradation, as determined by DSC, was higher.     

Body condition scoring (BCS) in corn snakes (Pantherophis guttatus) and comparison to pre-existing body condition index (BCI) for snakes

In the veterinary profession, the body condition score (BCS) plays an important role in the assessment of patients. It is a subjective, tactile method of evaluating body fat and muscle mass and is used in numerous species. Recognizing obesity (or the contrary, emaciation) is important for veterinarians treating reptiles and could be facilitated by a BCS. An existing form of body condition assessment already used is the body condition index (BCI), where the residuals from a regression of body mass on body length are calculated. Therefore, the goal of this study was to provide practitioners with a BCS system for corn snakes (Pantherophis guttatus) and to test it against the BCI. A total of 22 corn snakes (Pantherophis guttatus), stationed at the “Auffangstation für Reptilien” in Munich (reptile rescue centre, RRC), were subject of this study. Each had the following measurements taken: body weight (BW), snout–tail tip length (STL), snout–vent length (SVL) and circumference in the middle (C). Manual palpation of spine, area between vertebral spinous and transverse process, ribs and neck of each snake was performed by three veterinarians and assigned to specific scores by each examiner. A BCS (mean of examiners’ scores) was given to each snake according to manual palpation. The BCS system was chosen to be out of 5 in 0.5-point steps with 2.5 considered as ideal BCS. In the studied snakes, the BCS ranged from 1.5 to 3.5, with a median of 2.5. The median BW was 309 g (75–967 g), the median STL was 123 cm (79–153 cm), the median SVL was 104 cm (73–133 cm) and the median C was 7.5 cm (4.3–11 cm). BCS and BCI were positively correlated. A BCS includes a manual palpation of the animal and thus gives the examiner additional information to the objectively measured/calculated index.