Fracture repair with transfixation pins and fiberglass cast in llamas and small ruminants

Transfixation pinning with fiberglass casting is an effective and adaptable method of longbone fracture fixation in llamas and small ruminants. Treatment of fractures in 7 limbs of 4 llamas and 2 small ruminants with this technique are described. Steinmann pins are placed transcortically proximal, and if necessary, distal to the fracture. The pin ends and limb are encased in fiberglass cast material. The cast is strong enough in animals of this size to eliminate the need for external frames or connecting bars. Severely comminuted fractures and fractures near joints are especially suited to fixation with this technique. Complications encountered in these cases included loosening of pins and one delayed union. All fractures healed to permit full use of the limb.     

The Effect of Knotting Method on the Structural Properties of Large Diameter Nonabsorbable Monofilament Sutures

OBJECTIVE: To evaluate the effect of knotting method on the mechanical properties of large diameter nonabsorbable monofilament suture materials. STUDY DESIGN: In vitro mechanical evaluation. METHODS: A conventional square knot was compared with the surgeon's knot, sliding half-hitch, and clamped square knot. Knotted suture loops were created in a uniform manner and acutely tensioned to failure (20 mm/min loading rate; n = 20 per knot type for each material). Stiffness, yield, and failure characteristics of USP #2 nylon, #2 polybutester, #2 polypropylene, 27 kg test monofilament nylon fishing line, and 27 kg nylon leader material were evaluated. RESULTS: Compared with a conventional square knot, a surgeon's knot decreased stiffness for #2 polypropylene, 27 kg fishing line, and 27 kg leader (P < .05). A sliding half-hitch weakened all materials except 27 kg leader (P < .05). Clamping the first throw of a square knot increased the stiffness of 27 kg leader loops (P < .05). CONCLUSIONS: Based on clinically relevant parameters (stiffness and yield), knotting method had no effect on #2 nylon and #2 polybutester. The surgeon's knot is not recommended for #2 polypropylene and 27 kg fishing line and leader material. A sliding half-hitch decreased the yield of leader material. Clamping the first throw of a square knot had no adverse effects on acute properties of tested materials; it increased the stiffness for leader material. CLINICAL RELEVANCE: Knotting method does influence the structural properties of suture materials and should be considered when tying knots under tension.     

人员在岗培训在实施兽药GMP现场管理中的作用

论述了对兽药生产企业进行人员在岗培训的必要性,对实施在岗培训的基本程序和应注意的事项进行了总结,旨在为兽药企业进行GMP现场管理提供参考。     

Camel Streptococcus agalactiae populations are associated with specific disease complexes and acquired the tetracycline resistance gene tetM via a Tn916-like element

Camels are the most valuable livestock species in the Horn of Africa and play a pivotal role in the nutritional sustainability for millions of people. Their health status is therefore of utmost importance for the people living in this region. Streptococcus agalactiae, a Group B Streptococcus (GBS), is an important camel pathogen. Here we present the first epidemiological study based on genetic and phenotypic data from African camel derived GBS. Ninety-two GBS were characterized using multilocus sequence typing (MLST), capsular polysaccharide typing and in vitro antimicrobial susceptibility testing. We analysed the GBS using Bayesian linkage, phylogenetic and minimum spanning tree analyses and compared them with human GBS from East Africa in order to investigate the level of genetic exchange between GBS populations in the region. Camel GBS sequence types (STs) were distinct from other STs reported so far. We mapped specific STs and capsular types to major disease complexes caused by GBS. Widespread resistance (34%) to tetracycline was associated with acquisition of the tetM gene that is carried on a Tn916-like element, and observed primarily among GBS isolated from mastitis. The presence of tetM within different MLST clades suggests acquisition on multiple occasions. Wound infections and mastitis in camels associated with GBS are widespread and should ideally be treated with antimicrobials other than tetracycline in East Africa.     

In Vitro Mechanical Comparison of 2.0 and 2.4 Limited‐Contact Dynamic Compression Plates and 2.0 Dynamic Compression Plates of Different Thicknesses

Objective: To compare the bending structural stiffness and bending strength of thick and thin 2.4 mm limited contact dynamic compression plates (2.4 LC‐DCP), 2.0 mm LC‐DCP (2.0 LC‐DCP), and 2.0 dynamic compression plates (2.0 DCP). Study Design: In vitro mechanical study. Methods: Two thicknesses of 2.4 LC‐DCP, 2.0 LC‐DCP, and 2.0 DCP stainless‐steel plates were tested in 4‐point bending. Data were collected during bending until implants plastically deformed. Bending structural stiffness and bending strength were determined from load displacement curves. Mechanical properties were compared between plates and the effects of plate type, size, and thickness on stiffness and strength were assessed using ANOVA. Results: The thick 2.4 LC‐DCP implant was the stiffest and strongest; the thin 2.0 DCP implant was most compliant and weakest. Larger sized plates, thicker plates, and limited contact design of plates enhanced stiffness and strength. For the plates studied, plate size had a larger effect than plate type or thickness on stiffness and strength. Conclusion: Increasing the size (width) and thickness of plates increases both the bending structural stiffness and strength. For the plates studied, LC‐DCP implants were stiffer and stronger than DCP implants. Clinical Relevance: Plate bending structural stiffness and strength can be most effectively enhanced by using a larger sized plate, but gains can also be achieved by using a thicker plate and/or an LC‐DCP instead of a DCP implant when possible.     

The Effect of a Chronic Stressor, Lameness, on Detailed Sexual Behaviour and Hormonal Profiles in Milk and Plasma of Dairy Cattle

The objectives of the present study were to quantify the effects of a biological chronic stressor (lameness) on the duration and frequency of different oestrous behaviours in parallel with milk hormone profiles. Dairy cows 51.8 ± 1.4 days postpartum (n = 59), including 18 non‐lame control cows, were scored for lameness and closely observed for signs of oestrus having had their follicular phases synchronized by administration of gonadotrophin‐releasing‐hormone (GnRH) followed by prostaglandin F_2α (PG) 7 days later. Lameness shortened the period when herd‐mates attempted to mount the lame cows (1.83 ± 0.69 h vs 5.20 ± 1.53 h; p = 0.042) but did not affect the overall duration of total behaviours (lame 12.3 ± 1.3 h vs non‐lame 15.2 ± 1.3 h). Lameness also lowered the intensity of oestrus [1417 ± 206 points (n = 18) vs 2260 ± 307 points (n = 15); p = 0.029]. Throughout the synchronized oestrous period, lame cows mounted the rear of herd‐mates less frequently (p = 0.020) and tended to chin rest less (p = 0.075). Around the period of maximum oestrous intensity, lameness also diminished the proportion of cows mounting the rear of another cow and chin resting (p = 0.048, p = 0.037, respectively). Furthermore, lame cows had lower progesterone values during the 6 days before oestrous (p ≤ 0.05). Fewer lame cows were observed in oestrus following PG (non‐lame 83%, lame 53%; p = 0.030); however, if prior progesterone concentrations were elevated, lame cows were just as likely to be observed in oestrus. In conclusion, following endogenous progesterone exposure, lameness shortens the period when herd‐mates attempt to mount lame cows but does not affect the incidence of oestrous. However, lame cows are mounted less frequently and express oestrus of lower intensity. This is associated with lower progesterone prior to oestrus but not with abnormal oestradiol or cortisol profiles in daily milk samples.