Transparent Polycaprolactam Electrospun Nanofibers Doped with 1,10-phenanthroline Optical Sensor for Colorimetric Determination of Iron (II) and Vitamin C

A novel optical chemical sensor based on a transparent electrospun nanofibrous scaffold, composed of polycaprolactam (PA6) and 1,10-phenanthroline (Phen), deposited on a glass slide and impregnated with polyvinyl alcohol (PVA) was coupled with UV-vis spectrophotometry and used for colorimetric determination of ferrous ion (Fe²⁺) and ascorbic acid (AA). The electrospun nanofibers were characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) techniques. The main factors affecting performance of the optical sensor (PA6-Phen/PVA@glass) including Phen dosage, pH of sample solution, electrospinning time, polymer solution flowrate, electrospinning voltage, and PVA amount were investigated and the related optimum values were obtained. The analytical merits of the sensor for quantitative determination of Fe²⁺ and ascorbic acid was evaluated. The limit of detection (LOD) and limit of quantification (LOQ) for Fe²⁺ were 1 and 3 μg mL^-1, respectively. The linear dynamic range (LDR) was 3–150 μg mL^-1 with the determination coefficient (R²) of 0.991. The relative standard deviation (RSD %, n=3) for a solution of 60 μg mL^-1 was 5.4 %. For determination of AA, LOD and LOQ were obtained equal to 0.5 and 2 μg mL^-1, respectively. The linear dynamic range was in the 2–200 μg mL^-1 range with a R2 of 0.994. The RSD % at 100 μg mL^-1, n=3) was equal to 7.0 %. The sensor was applied successfully to the detection of Fe(II) and AA in real water samples and aspirin tablets.     

Isolation of Nanocellulose from Water Hyacinth Fiber (WHF) Produced via Digester-Sonication and Its Characterization

The successful isolation and characterization of water hyacinth fiber (Eichornia crassipes) (WHF) nanocellulose is presented in this study. The novelty was in exploring a wider range of properties of highly purified samples of WHF after each stage of production in more depth. The isolation was accomplished by pulping in a digester and sonication. Morphological changes before and after treatment were demonstrated by scanning electron microscopy (SEM). The lignin and hemicellulose content decreased during chemical treatment. Transmission electron microscopy (TEM) and particle size analyzer (PSA) were used to determine the morphology of WHF after sonication for 1 h. TEM shows that the diameter and length of nanocellulose WHF were 15.61 and 147.4 nm, respectively. The crystallinity index and crystalline domain area significantly increased after chemical treatment. The highest crystallinity index was 84.87 % after an acid hydrolysis process. The increase in crystallinity leads to good thermal stability. Moisture absorption tests of WHF were carried out before and after treatment. The lowest moisture absorption was in the cellulose fiber after sonication (nanocellulose).     

Advances in Variable Rate Technology Application in Potato in The Netherlands

Precision agriculture is a farming management concept based on observing, measuring and responding to inter- and intra-field variability in crops. In this paper, we focus on responding to intra-field variability in potato crops and analyse variable rate applications (VRAs). We made an overview of potential VRAs in potato crop management in The Netherlands. We identified 13 potential VRAs in potato, ranging from soil tillage to planting to crop care to selective harvest. We ranked them on availability of ‘proof of concept’ and on-farm test results. For five VRAs, we found test results allowing to make a cost-benefit assessment. These five VRAs were as follows: planting, soil herbicide weed control, N side dress, late blight control and haulm killing. They use one of two types of spatial data: soil maps or biomass index maps. Data on costs and savings of the VRAs showed that the investments in VRAs will pay off under practical conditions in The Netherlands. Savings on pesticide use and N-fertilizer use with the VRAs were on average about 25%, which benefits the environment too. We foresee a slow but gradual adoption of VRAs in potato production. More VRAs will become available given ongoing R&D. The perspectives of VRAs in potatoes are discussed.     

High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.     

An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Polysulfonamide (PSA) has been widely used in many fields because of its excellent thermodynamic properties. In this study, PSA fibers were prepared separately via two different spinning ways, including conventional wet spinning and electrospinning. Fluid motion of wet spinning and electrostatic field of electrospinning were modeled using finite element analysis to investigate the spinning process. The properties of fabricated PSA fibers were characterized systematically by scanning electron microscope (SEM), fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermal gravity analysis (TGA) and electronic strength tester. Based on the simulation and theoretical analysis of spinning process, it was found that the extruding force of the wet spinning is larger than that of the electrospinning. The larger extruding force makes the alignment of macromolecules inside fiber relatively uniform, and a higher proportion of crystallization happens. Accordingly, the mechanical properties and thermal stability of PSA fibers could be improved due to a higher proportion of crystallization. The experimental results of mechanical strength and TG test are coincided with the simulation results. PSA fiber prepared by wet spinning has better thermal stability and mechanical properties than that fabricated by electrospinning.     

How Long can Rogued Potato Plants Left in the Field Be a Source of <Emphasis Type="Italic">Potato Virus Y</Emphasis> for Aphids?

Removal of diseased plants (roguing) is commonly practiced in seed potato production. Diseased plants left to desiccate in fields could possibly serve as sources of Potato virus Y (PVY). PVY acquisition by three aphid species (Myzus persicae, Rhopalosiphum padi, Aphis fabae) was evaluated with leaflets from rogued plants for seven days. Results showed greater PVY acquisition rates in non-colonizing aphids species compared to colonizing ones. The proportion of aphids leaving leaflets increased with time (i.e. days after plants were uprooted) and some aphids were carrying PVY in their stylets on each of the seven days of the experiment, suggesting that aphids were able to probe and acquire PVY even when plants wilted. These results confirmed that diseased plants left in fields can serve as a source of PVY for aphids even after they wilted and emphasises that proper actions must be taken to efficiently remove diseased plants from fields.     

Effectiveness of Combined Use of Mineral Oil and Insecticide Spray in Reducing <Emphasis Type="Italic">Potato Virus Y</Emphasis> (PVY) Spread under Field Conditions in New Brunswick,Canada

In the 2014 and 2015 crop seasons, the efficacies of different types, rates and combinations of mineral oil and insecticide foliar sprays for reducing Potato virus Y (PVY) spread were tested in controlled field trials in New Brunswick (NB), Canada. Experimental plots were planted with certified PVY-free Goldrush, supplemented with known virus-infected seed to raise PVY inoculum to 2.3% and 3% at the beginning of the 2014 and 2015 seasons, respectively. Treatments consisted of mineral oil-only sprays at different application rates, insecticide-only sprays of differing numbers, and several combined mineral oil and insecticide spray regimes, all compared to a no-spray control treatment. PVY spread to 18% (2014) and 22% (2015) of initially virus-free plants in no-spray control plots, with significant reductions observed in PVY spread in several treatments. Greatest PVY reductions, as low as 4% (2014) and 12% (2015), were in combined mineral oil and insecticide spray treatments, followed by oil-only sprays; while insecticide-only sprays did not significantly reduce PVY spread. As well as measuring PVY spread to marked test plants and randomly collected post-harvest tuber sample from the plots, exhibited similar treatment pattern for PVY incidence. Multiple logistic regression modeling confirmed the relative efficacy of combined oil and insecticide sprays for reducing PVY spread, while accounting for variable inoculum and aphid factors. Modeling also highlighted the importance of planting low-PVY seed initially, and of early application of foliar sprays. Local best management practice recommendations for reduction of in-field PVY spread were discussed.     

Allocating the costs of multi-purpose water resource development: a case study of Chi-Chi Weir in Taiwan

Most multi-purpose water resources have been planned and constructed by governments in Taiwan to meet the water demands of different users. However, economic and solvency differences among parties using water create conflicts regarding the reasonable and equitable allocation of investment and operational costs. The Chi-Chi Weir in Nantou County, which was completed in 2002, meets the high water demand of residents and the needs of industrial growth in central Taiwan. Thus, multi-purpose water reservoirs are designed to serve agriculture, the public and industry. Three analytical methods, the quantity-based method, marginal cost method, and separable cost remaining benefit method (SCRB), are employed to compare the cost allocation for different parties using water. The quantity-based method indicates that proportional costs allocated to agriculture, the public, industry and new irrigated areas are 88.02, 3.63, 7.86, and 0.49%, respectively. Via the marginal cost method, the proportional costs allocated to agriculture, the public, hydropower, industry and new irrigated areas are 68.44, 2.51, 28.71, and 0.34%, respectively. The marginal cost price of water is NT$ 2.97 ton⁻¹; industrial use has the highest price. Based on the SCRB method, the proportional costs allocated to agriculture, the public, hydropower, and new irrigated areas are 18.2, 22.2, 51.8, 4.8, and 2.9%, respectively.     

Gamma-linolenic Acid from Fifty-seven Ribes Species and Cultivars

Plant Foods for Human Nutrition - γ-linolenic acid (GLA, 18:3n-6) is a bioactive fatty acid (FA) that exerts several healthy actions; however, its occurrence is restricted to a few oils. The...