Factors influencing stump sprouting by pondcypress (Taxodium distichum var. nutans (Ait.) Sweet)

Sprouting can be an important mechanism of regeneration in harvested cypress (Taxodium sp.) wetlands; however, limited information exists on factors influencing sprouting. We examined the influence of harvesting practices, tree size, and site conditions on stump sprouting in eight pondcypress (Taxodium distichum var. nutans (Ait.) Sweet) wetlands in Florida, USA. Stumps were cut at three heights: 20 cm below high water level, at high water, and 40 cm above high water. Half of each site was harvested using a sawhead feller and the other half using shearhead. We monitored sprouting for 2 years post-harvest. Stump height affected first year sprouting, but the effect disappeared during year 2. Felling equipment did not affect sprouting; however, the shearhead caused greater stump damage. Sprouting declined with increasing parent tree size; percentage of stumps with sprouts after 2 years was 68% for trees 10–14 cm dbh and 28% for trees 20–24 cm dbh. Stump sprouting ranged among sites from 23 to 54% after 2 years. Results indicate that sprouting may be an important, but inadequate, form of regeneration. At sites with short hydroperiods, dense understories, and/or predominance of trees greater than 20 cm dbh, reduced sprouting may occur, and planting seedlings may be beneficial.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Application of a modified rate equation to the acetylation of wood

A modified rate equation, in which the diffusion of reagent was taken into consideration, was proposed and applied to results reported previously for the acetylation of wood. The equation was fitted more successfully to the prolonged as well as the early stage of the reaction than a common first-order rate equation. Although the conclusions were virtually unchanged, the reliability was enhanced because reaction parameters such as the rate constant, ultimate extent of the reaction, and activation energy calculated for the modified equation were based on much more data than those reported previously. The equation proposed here may be applicable not only to acetylation but to other chemical modifications of cellulosic materials in heterogeneous systems.     

Leaf-litter decomposition of 15 tree species in a lowland tropical rain forest in Sarawak: dynamics of carbon,nutrients, and organic constituents

The effects of tree species on the dynamics of nutrient transformations during leaf-litter decomposition are not well understood in tropical rain forests. To examine differences in the dynamics of C, nutrients, and organic constituents during decomposition among tree species, the leaf-litter decomposition of 15 trees was assessed using a litter-bag method in a lowland tropical rain forest in Sarawak. The dynamics of C was parallel to that of weight loss. The dynamics of nutrients were grouped into three patterns. The dynamics of K was characterized by a high leaching loss in the initial stages, and that of Ca and Mg generally showed a gradual decrease over the course of decomposition. The dynamics of N and P showed highly different patterns with the weight loss, and was characterized by relatively higher remaining mass at the end of the experiment. The variations or exceptions of nutrient dynamics among tree species were considered to be related to the initial concentration of each nutrient. For the dynamics of organic constituents, water-soluble carbohydrates disappeared quickly at the initial stages, and acid-soluble carbohydrates were the second fastest decomposing fraction; the decomposition of acid-insoluble residue (AIS) was the slowest. The release of limiting nutrients (N and P) generally followed the disappearance of AIS, but was independent of the disappearance of AIS when the initial concentrations of these nutrients were very low.     

Powdery mildew resistance gene (<Emphasis Type="Italic">Pm</Emphasis>-<Emphasis Type="Italic">AN</Emphasis>) located in a segregation distortion region of melon LGV

Powdery mildew is one of the most important melon pathogens all over the world. So far, many genes conferring resistance to powdery mildew of melon have been described, but few of these have been finely mapped or cloned. Two F₂ populations derived from Ano2 × Hami413 and Ano2 × Queen were used to map the powdery mildew resistance gene by methods of Bulked Segregation Analysis (BSA), comparative genomics and Resistance Gene Analogues (RGA) mapping. It was found that the resistance to powdery mildew in Ano2 was conferred by a dominant gene, and the gene was named Pm-AN. The genetic analysis revealed that Pm-AN located between two codominant markers RPW and MRGH63B in linkage groupV. The genetic distances between Pm-AN and these two markers were 1.4–1.8 and 1.6–2 cM. No recombination was found between Pm-AN and markers ME/E1, SRAP23. Pm-AN was located in a RGA-rich region and cosegregated with the RGA marker MRGH5 and the resistance gene Vat. Synteny analysis showed that markers in this region were collinear between melon and cucumber. Segregation distortion was found in this region using both Ano2 × Hami413 and Ano2 × Queen F₂ populations, and the distortion was more distinct in Ano2 × Hami413 F₂ population. The center of segregation distortion was located in the RGA rich region harboring Pm-AN.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.     

Compressive and tensile properties of a butt-jointed lamination model

A study was undertaken to evaluate the effect of glue application and placement of butt-joints on the compressive and tensile properties in a butt-jointed lamination. The aim was to provide background information for producing butt-jointed, glued, laminated timber. Three butt-jointed lamination models were prepared from spruce-pine-fir (S-P-F) dimension lumber with glued and nonglued butt joints, with different placements of the butt joints in the models. The axial stiffness and strength properties were assessed using both compressive and tensile tests. The results of the study indicated that for the compressive lamination model the application of glue at the butt joint gave more stiffness than the nonglued butt joint. Neither glue application nor placement of the joint had a statistically significant effect on the compressive strength. There were no significant differences between the glued and nonglued butt joint for either tensile strength or stiffness.     

Thermal diffusion in Masson pine wood

In order to analyze the effects of the temperature gradient on moisture movement during the highly intensive microwave-vacuum drying, thermal diffusion of Masson pine wood was studied. Internal distribution of temperature and moisture in Masson pine samples sealed by epoxy resin and aluminum foil was measured, the magnitude of thermal diffusion was calculated and the influencing factors of thermal diffusion were discussed. Results showed that with the transfer of moisture toward the low temperature in wood, opposite temperature and moisture gradient occurred. The initial moisture content （MC）, temperature and time are important factors affecting this process; the thermal diffusion is in proportion to wood temperature, its initial moisture and time. The temperature and distance from hot surface is strongly linearly correlated, and the relationship between MCs at different locations and distance from the hot end surface changes from logarithmically form to exponentially form with the increase in experimental time.     

Estimating “autotrophic” belowground respiration in spruce and beech forests: decreases following girdling

Seasonal fluxes of CO₂ from soil and the contribution of autotrophic (root + mycorrhizal) to total soil respiration (SR) were estimated for a mixed stand of European beech (Fagus sylvatica) and Norway spruce (Picea abies) in Central Europe. Mature trees of each species were girdled in August 2002 to eliminate carbohydrate allocation to roots. SR was measured at distances of 0.5, 1.0, and 1.5/2.0 m from the bole of each tree at 1–2 weeks intervals throughout the fall of 2002 and monthly during the spring and summer of 2003. The contribution of roots and mycorrhizae to total SR was estimated by the decrease in SR compared to ungirdled control trees to account for seasonal patterns evident in controls. SR decreased with soil temperature in the fall 2002 and increased again in 2003 as soil warmed. During most of the study period, SR was strongly related to soil temperature. During the dry summer of 2003, however, SR appeared to be uncoupled from temperature and was strongly related to soil water content (SWC). Mean rates of SR in beech and spruce control plots as well as root densities did not show a clear pattern with distance from the bole. SR decreased to levels below controls in beech within a few days after girdling, whereas spruce did not show a significant decrease until October 2002, 6 weeks after girdling. In both beech and spruce, decreased SR in response to girdling was greatest closest to the bole, possibly reflecting increased mycorrhizal activity close to the bole. Autotrophic respiration was estimated in beech to be as much as 50% of the total SR in the stand. The contribution of autotrophic respiration was less certain for spruce, although close to the bole, the autotrophic fraction may contribute to total SR as much as in beech. The large fraction of autotrophic respiration in total SR requires better understanding of tree level stresses that affect carbon allocation below ground.     

Effect of coupling media on velocity and attenuation of ultrasonic waves in Brazilian wood

Coupling media are necessary to ensure that transducers bond to wood specimens to minimize coupling losses and improve the accuracy of ultrasonic measurements. There are several types of coupling media available, and the optimal choice is not known. In this work, we analyzed the results of ultrasonic wave attenuation for 0.1-MHz longitudinal and transverse transducers with six different materials as coupling media in nine species of Brazilian wood with densities in the range 700–1170 kg/m³. Tests were performed using constant pressure on the transducer and with wave propagation in the longitudinal direction. For transverse transducers, the polarization was in the radial and tangential directions. The results were analyzed statistically and showed that, for attenuation in both longitudinal and transverse waves, the material used for coupling had significant effects, whereas the wood species had no effect. For longitudinal waves, the statistical evaluation showed that the coupling material performance was strongly dependent on the species of wood, but it was not possible to observe any tendency of behavior associated with specific anatomical properties.