In Situ Avoidance Response Of Adult Atlantic Salmon To Waste From The Wood Pulp Industry

An accidental release of non-toxic waste from decommissioned wood pulp industry in the River Numedalslågen, Southern Norway, occurred in the upper part of the accessible stretches for anadromous fish during a study of migration behaviour of radio tagged Atlantic salmon (Salmo salar, n=32, body length 51–99 cm). The fish had completed the migration phase and initiated the resident phase characterised by little movement until spawning. When the wooden fibres and pulp were released, 16 of 32 (50%) salmon showed an immediate avoidance response. Six (19%) salmon moved upstream and 10 (31%) salmon moved downstream. Of the salmon moving downstream, eight (25%) moved all the way to sea (average 14.8 km). Four re-entered the River Numedalslågen, two entered a neighbouring river and two were not recorded later. Fish moving downstream but without moving to the sea, moved on average 5.3 km during the episode, whereas those moving upstream moved on average 6.7 km. All fish recorded after the episode (n=30) survived until the spawning season. The study demonstrates that fish in nature may show an evident avoidance response, even to non-toxic contaminants. For Atlantic salmon, the size of the spawning population may be reduced by fish leaving the river (13% left the river and never came back). Moreover, the dispersal of salmon to other rivers may increase, and the distribution of the spawning population within the contaminated river may shift.     

Effects of accelerators on mobility of 14C-2,4-dichlorophenoxy butyric acid in plant cuticles depends on type and concentration of accelerator

Effects of diethyl suberate (DESU), diethyl sebacate (DES), dibutyl suberate (DBSU), dibutyl sebacate (DBS), and tributyl phosphate (TBP) on diffusion of 14C-2,4-dichlorophenoxy butyric acid (2,4-DB) across cuticular membranes (CM) was studied. Astomatous CM were isolated enzymatically from Stephanotis floribunda Brongn. leaves, and diffusion was measured at 20 degrees C. The alkyl-substituted dicarboxylic acids constitute a homologous series with carbon numbers increasing from C12 to C18. Molecular weights increased only moderately from 230.0 (DESU) to 314.5 (DBS), while partition coefficients varied over orders of magnitude from 92 (DESU), to 1213 (DES), to 15,988 (DBSU), to 210,762 (DBS). All the above compounds turned out to be accelerators as they increased 2,4-DB mobility by up to 40-fold with accelerator concentrations in the CM ranging from only 9.2 to 105 g kg(-1). Efficacy (2,4-DB mobility in the presence/mobility in the absence of accelerators) increased with increasing concentrations of accelerators in CM or in reconstituted cuticular waxes. Plotting efficacy vs accelerator concentration in the CM resulted in straight lines, and their slopes increased in the order DBS (0.14), DBSU (0.31), DES (0.51), and DESU (0.85). Hence, DESU was the most powerful accelerator in this series as it increased 2,4-DB mobility in the CM about 6 times more than DBSU. Waxes constitute the major barrier in plant cuticles, and plots of efficacy vs accelerator concentration in Stephanotis wax were also linear, but compared to CM slopes were steeper by factors of 3.20 (DBS), 2.97 (DBSU), 2.70 (DES), and 1.62 (DESU). TBP was similarly effective as DESU, but plots of efficacy vs concentration were not linear, and curves approached a plateau at 60-80 g kg(-1). These data are discussed with regard to suitability of these accelerators for formulating systemic pesticides.     

Geographical variation of solanidane aglycone glycoalkaloids in the wild potato species Solanum chacoense Bitter

The Colorado Potato Beetle is a serious pest of the cultivated potato. Natural resistance has been found in a few wild species, including Solanum chacoense Bitter, in which the resistance is attributed to the presence of leptine glycoalkaloids. Production and accumulation of these compounds within S. chacoense varies widely and appears to be inherited in a quantitative fashion, but high leptine-producing clones occur rarely. In the present study, 15 different accessions from various locations and altitudes of origin within central to northern Argentina and Paraguay were analyzed for foliar glycoalkaloid (leptine, leptinine, solanine, chaconine) content. The objective was to infer the frequency of leptine production in ecogeographically distinct S. chacoense accessions, and to ascertain any possible association between leptine levels/concentrations and ecogeographical location. Leptines were detected in 8 of the 15 accessions, and the amounts within each accession varied widely. Most of the leptine-containing accessions originated from western Argentina except two in province Córdoba in central Argentina. There was no relationship between elevational level and leptine, but there was a negative trend with total glycoalkaloids (TGA) and elevation, due to solanine and chaconine levels which decreased with increasing elevation. In addition, nine unidentified, putative glycoalkaloids were detected, in very high proportions in some individuals and accessions. This study raises interesting questions about glycoalkaloid distribution, helps provide direction for new avenues of leptine and glycoalkaloid research, and proposes a systematic, ecogeographically based method for bioprospecting genes controlling rare plant secondary compounds.     

Effects of harvesting date and storage on the amounts of polyacetylenes in carrots, Daucus carota

The amounts of three main polyacetylenes in carrots; falcarinol, falcarindiol, and falcarindiol-3-acetate, were determined by HPLC, during three seasons, in carrots harvested several times per season and at different locations in Sweden. The amounts of falcarindiol first decreased from a relatively high level and then increased later in the harvest season. The amounts of falcarindiol-3-acetate showed similar variations, whereas the amounts of falcarinol did not exhibit any significant variation during the harvest season. During storage the amount of polyacetylenes leveled off, increasing in samples initially low and decreasing in samples initially high in polyacetylenes. The amounts of all polyacetylenes varied significantly due to external factors and between stored and fresh samples. This variation opens up possibilities to achieve a chemical composition of polyacetylenes at harvest that minimizes the risk of bitter off-taste and maximizes the positive health effects reported in connection with polyacetylenes in carrots.     

Comparison of Iodide and Iodate Accumulation and Volatilization by Filamentous Fungi during Static Cultivation

Five common fungal strains, Cladosporium cladosporioides, Aspergillus clavatus, Penicillium citrinum, Fusarium oxysporum, and Alternaria alternata, were cultivated in presence of iodide and iodate to evaluate their efficiency in iodine biovolatilization and bioaccumulation. Our results suggest that iodide and iodate bioaccumulation by microscopic filamentous fungi is similar although the biological transformation into volatile iodine compounds is driven by various pathways resulting in higher volatilization efficiency of iodate. Thus, the mobilization of iodate by filamentous fungi is superior to iodide mobilization. Our paper is also the first to compare the iodide and iodate volatilization efficiency by microorganisms. Our results highlight the significant role of filamentous fungi in biogeochemistry of iodine, especially in formation of environmentally reactive volatile forms that may contribute to ozone layer destruction.     

Management of human health risk in the context of kitchen gardens polluted by lead and cadmium near a lead recycling company

Purpose

At the global scale, gardening activities are often performed in urban areas with a historical background of pollution. In this study, a participatory program was developed with citizens concerned by gardening activities near a 50-year-old regulated lead recycling company, with the aim of co-constructing the tools for the assessment and management of potential sanitary risks induced by historic pollution with persistent (eco) toxic metals: lead and cadmium.

Materials and methods

Soils and vegetables (lettuce, leek, celery, carrot, chard, pumpkin, and celeriac) samples were collected from four kitchen gardens neighboring a 50-year-old secondary lead smelter. Both total and in vitro human bioaccessible metal concentrations in the cultivated plants were measured in relation to soil characteristics.

Results and discussion

The results showed that the soils of these gardens were slightly contaminated by metals (Pb, 77 to 236 mg kg^?1; and Cd, 0.5 to 1 mg kg^?1) in comparison with the natural geologic background. However, significant pollution of vegetables can occur especially with lead (Pb up to 9.8 mg kg^?1 in lettuce) and certainly as a result of direct foliar transfer. The washing of plants before consumption is therefore recommended in the context of atmospheric fallout of ultrafine particles enriched with metals.

Conclusions

Metal bioaccessibility measure integrates the influence of metal type, plant type, and soil physico-chemical properties. Based on the results, it is proposed that human bioaccessible fraction of metals may also be currently taken into account as well as total metal quantities and bioaccumulation factors in risk assessment studies performed in gardens. Overall, this study has led to reflections and functional recommendations aimed at reducing human exposure and to finally developing sustainable gardening practices.

     

Injury Symptoms and Releasing Rates of Inorganic Ions from Pine Needles as Indicators of Atmospheric Pollution in the Canary Islands Forests

Pinus canariensis Chr, Sm. ex DC. samples showing severe damage produced by atmospheric pollution were taken from three locations under the possible influence of the emissions of a fuel-fired power plant in Tenerife. Other samples were taken at four control locations in Tenerife, La Palma and El Hierro (Canary Islands, Spain), distant from local sources of pollution. Injury symptoms were evaluated by visual examination of the needles, and the data were correlated with the releasing rates of inorganic anions and cations from the needles when sonicated under water. For this purpose, the samples were sonicated 4-times during 10 min successive periods while renewing the water layer in between, and the leachates were analyzed by capillary zone electrophoresis. Measurable amounts of K⁺, Na⁺, Ca²⁺, Mg²⁺, Cl^- and SO₄ ^2- were detected. Potassium ions were released in approximately constant or increasing amounts along the sonication series in the control samples, whereas the samples damaged by pollution released larger amounts during the first sonication treatment, and much lower amounts afterwards. Indices which estimated the initial releasing rate of the cations were examinated as possible indicators to evaluate atmospheric pollution. Only the K⁺ index showed a large positive correlation with the brown-reddish decoloration and tip necrosis of the needles. The correlation of the K⁺ index with flecking and steepling of the needles was much lower. After principal component analysis of the autoscaled data, the sampling sites and the variables were projected on the plane of the first and second eigenvectors. Using the visual examination parameters as variables, both without and with addition of the cation indices, the sampling sites appeared in the order of increasing damage along the first eigenvector. Evidence of the effects of long-range transported pollutants was obtained, and no relationship was demonstrated between damage of pine needles and emissions from the power plant.     

Mikrobielle prozesse im asche‐klärschlamm‐kompost bei der rekultivierung von hochhalden in abhängigkeit von der dauer seiner aufbringung

Zur Abdeckung einer Hochhalde im Industriegebiet der Leuna‐Werke zum Schutz der Umwelt vor Staub‐und Schadstoffemmission wurde ein Asche‐Klärschlamm‐Kompost eingesetzt. Er wurde in Abhängigkeit von der Dauer der Aufbringung und der Lage auf den Halden hinsichtlich seiner mikrobiellen Aktivität untersucht (Mikrobielle Biomasse, Enzymaktivitäten, Mineralisierbarkeit in der Langzeitinkubation, N‐Nachlieferungsver‐mögen, Keimgehalt an Bakterien, Actinomyceten und Pilzen, Bakterien‐ Pilz‐Verhältnis, ökophysiologische Parameter wie metabolischer Quotient und C_mik/C_org‐Verhältnis).

Die Ergebnisse haben gezeigt, daß die eingesetzten Substrate über einen längeren Zeitraum mikrobiell sehr aktiv sind und einer starken Mineralisierung unterliegen. Sie ist im Jahr der Aufbringung am stärksten. Die Besiedlung der Substrate trotz eines hohen C_org‐Gehaltes ist gering (C_mik in C_org‐Verhältnis von rd. 0,3%). Das Pilz‐Bakterien‐Verhältnis hat sich während des Versuchszeitraumes von 4 Jahren nur unwesentlich verändert. Die mikrobielle Aktivität nimmt in der Bodentiefe im Vergleich zu Ackerböden langsam ab.

Bis in eine Tiefe von 100 cm lagen mehr als 50% des mineralischen Stickstoffs als Ammonium vor, ab 150 cm war nur noch Nitrat nachzuweisen. Eine Belastung des Grundwassers mit Stickstoff konnte bisher ausgeschlossen werden.

Die eingesetzten Substrate bieten günstige Voraussetzungen für das Pflanzenwachstum. Durch die Begrünung der Halden wird die Staubbelastung in Wohnsiedlungen stark vermindert.     

Quantitation of odor-active compounds in rye flour and rye sourdough using stable isotope dilution assays

Application of the aroma extract dilution analysis on a flavor distillate prepared from freshly ground rye flour (type 1150) revealed 1-octen-3-one (mushroom-like), methional (cooked potato), and (E)-2-nonenal (fatty, green) with the highest flavor dilution (FD) factors among the 26 odor-active volatiles identified. Quantitative measurements performed by stable isotope dilution assays and a comparison to the odor thresholds of selected odorants in starch suggested methional, (E)-2-nonenal, and hexanal as contributors to the flour aroma, because their concentrations exceeded their odor thresholds by factors >100. Application of the same approach on a rye sourdough prepared from the same batch of flour revealed 3-methylbutanal, vanillin, 3-methylbutanoic acid, methional, (E,E)-2,4-decadienal, 2,3-butanedione, and acetic acid as important odorants; their concentrations exceeded their odor thresholds in water and starch by factors >100. A comparison of the concentrations of 20 odorants in rye flour and the sourdough made therefrom indicated that flour, besides the fermentation process, is an important source of aroma compounds in dough. However, 3-methylbutanol, acetic acid, and 2,3-butanedione were much increased during fermentation, whereas (E,E)-2,4-decadienal and 2-methylbutanal were decreased. Similar results were obtained for five different flours and sourdoughs, respectively, although the amounts of some odorants in the flour and the sourdough differed significantly within batches.     

Evaluating agroforestry interventions in extension projects

Because of the relative dearth of scientific information in agroforestry, monitoring and evaluation of agroforestry technologies in development projects plays an important role in the development and improvement of technical extension recommendations. To identify appropriate methodologies, ICRAF conducted in 1988–89 a review of agroforestry technology monitoring and evaluation in 166 projects worldwide, of which 108 responded. Almost 80% of these were involved in technology evaluation. Many extension projects were conducting research to test technologies on-farm or on research plots. Technology evaluation by projects focused on the biological of trees, often with inadequate consideration of the technology context. Few projects seemed to use farmer assessment in evaluation. Recommendations are made for an effective evaluation process and selection of appropriate methods and variables to be assessed by projects. Methods should be selected according to the availability of resources and should favour collaborative or collegial interaction between farmers and project staff.