Triploid Induction in the Yellowtail Tetra,Astyanax altiparanae,Using Temperature Shock: Tools for Conservation and Aquaculture

Triploidization is an interesting tool to produce sterile fish. In the yellowtail tetra, Astyanax altiparanae, this can be applied for aquaculture and surrogate technologies. In this study, we compared the efficacy of cold (2 C) or heat shock (38 C, 40 C, and 42 C) on triploid induction in the yellowtail tetra. The eggs were treated with cold or heat shock, 2 min postfertilization (30 min in cold shock or 2 min in heat shock). Intact embryos served as the control group. Ploidy status was confirmed by karyotyping, flow cytometry, and nuclear diameter of erythrocytes. The hatching rate decreased after cold shock (12.69 ± 15.76%) and heat shock at 42 C (0.35 ± 0.69%) in comparison with the control group (63.19 ± 16.82%). At 38 C and 40 C, hatching rates (61.29 ± 17.73% and 61.75 ± 22.1%, respectively) were not decreased. Only one triploid arose at 38 C (1/80). At 40 C, a high number of triploids arose (72/78). At 42 C, very few embryos developed into the hatching stage. A large number of haploid individuals arose after cold shock (61/75), with only one triploid. Our results indicate that heat shocking of embryos at 40 C is optimum for triploid production in the yellowtail tetra.     

Modified plant architecture to enhance crop disease control: genetic control and possible value of upright fruit position in cucumber

Plant architectural features can facilitate disease control by creating unfavourable environments for pathogen growth or limiting pathogen contact with the host. In the case of Phytophthora capsici infection of cucumber (Cucumis sativus), the susceptible fruit typically lie in contact with soil under warm, moist conditions of a full canopy, an ideal location for exposure to inoculum and disease development. We have shown that increased row spacing, trellising and architectural variants that allow for more open canopies, such as shorter vines, reduced branching, or smaller leaves, can modify microclimate as assessed by temperature at the location of developing fruits. However, only trellising reduced infection rates (<3 % infection vs. 22 % for control). A cucumber accession PI308916, with extremely short internodes and resulting upright position of young fruit, also exhibited reduced disease. Fruit of PI308916 were susceptible when inoculated with P. capsici, indicating that reduced infection likely resulted from decreased soil contact. The compact trait is inherited as a single recessive gene, cp. Like many architectural traits, cp may be pleiotropic; PI308916-derived breeding lines were reported to have poor seedling emergence. PI308916 exhibited inconsistent apical hook formation that co-segregated with short internodes in F₂ and backcross generations, and disorganized internodal cortical cell arrangement. The combined phenotypes suggest either pleiotropy or very tight linkage of genes affecting hormone balance or cell division. The narrow chromosome region recently defined by QTL analysis includes candidate gene homologs of meristem related genes modulating cell division or spacing of lateral shoot organs and genes associated with brassinosteroid signaling or cytokinin content.     

Occurrence in Italy and characteristics of lettuce downy mildew (Bremia lactucae) resistant to phenylamide fungicides

Control of lettuce downy mildew (Bremia lactucae) with phenylamide fungicides has failed in some intensive lettuce-producing areas in Northern Italy since Spring 1993. Before then, these chemicals and particularly metalaxyl, provided the best disease control. The sensitivity of Bremia lactucae isolates collected in such areas to metalaxyl was evaluated in the laboratory. These strains grew and sporulated profusely on lettuce seedlings treated with 100 and 200 ppm of metalaxyl, whereas sensitive control strains were completely inhibited when treated with fungicide concentrations ranging from 0.5–1 ppm. Thus in Italy occurrence of resistance to phenylamide fungicides in Bremia lactucae has also been demonstrated, as in almost all the countries where these chemicals were previously authorised. Subsequently, a demonstration of occurrence of resistance was made and the virulence pattern of several strains (resistant and sensitive to metalaxyl) was characterised using differential NL series containing the 13 DM resistant genes or R factors. The results suggest the occurrence of a new pathotype in Italy different from all the 16 NL Bremia lactucae races studied.     

Farmers' knowledge and perceptions of termites as pests of yam (Dioscorea spp.) in Central Benin

Destruction of yam (Dioscorea spp.) tubers by termites is a major constraint to yam production in Central Benin. To obtain the basic information for the development of appropriate strategies of termites management in yam, a structured questionnaire was used to interview 142 farmers about their knowledge of termite species of yam, susceptibility of yam landraces, and management practices in 14 villages through the study area. A total of 45 vernaculars names of termites were recorded corresponding to 10 species. All the names given to termite species had a signification, mainly related to morphological aspects, type of damage, and termite caste. Eleven features were used by farmers to identify yam termites. The infestation of yam fields mostly occurred from October to April with Amitermes evuncifer and Trinevitermes oeconomus being the most damaging termite species. Overall, eight factors were identified by farmers as favouring the proliferation of termites in yam fields with drought being the most frequently reported factor. Farmers identified 11 yam landraces that were highly susceptible to termites attack, while 12 yam landraces were listed as resistant. Application of chemicals was the most commonly reported control method, followed by destruction of termite nest, and application of botanical extracts. According to farmers, the high multiplication rate of termites is the most important constraint in managing the issue of termites in yam.     

New invasion of <Emphasis Type="Italic">Bemisia tabaci</Emphasis> Mediterranean species in Brazil associated to ornamental plants

In Brazil, the first major invasion event of Bemisia tabaci was that of Middle East–Asia Minor 1 (MEAM1) species, formerly termed as B biotype, which commenced in the 1990s mainly by ornamental plants in São Paulo State. More than two decades after this invasion, the presence of the Mediterranean (MED) species of B. tabaci, formerly Q biotype, was reported in Rio Grande do Sul, the southernmost State of Brazil, and now in São Paulo and Paraná States, in southeastern Brazil. Specimens of whiteflies collected from commercial begonia, hydrangea, petunia and poinsettia greenhouses in São Paulo, and also from begonias and poinsettias collected in flower shops in Paraná, were all identified as belonging to MED species. Furthermore, the secondary endosymbionts Arsenophonus, Hamiltonella and Rickettsia of MED from São Paulo and Paraná were detected by PCR and their presence confirmed by sequencing and FISH analysis, and those results differed from MED detected in Rio Grande do Sul that harbored only Hamiltonella and Cardinium. Our results suggest a new MED invasion into Brazil and is associated with ornamental plants. The two MED populations are genetically different and suggest that they are separate invasions.     

Characterization of Acidovorax citrulli strains isolated from solanaceous plants

Acidovorax citrulli is the causal agent of bacterial fruit blotch disease of cucurbits. Strains of this pathogen are distributed into two major groups: Group I strains have been mainly isolated from melon and other non-watermelon cucurbits, while Group II strains have been mainly recovered from watermelon. Here we report the characterization of strains T1 and EP isolated from diseased tomato and eggplant plants, respectively, and further confirmed to belong to A. citrulli species. Based on PCR, PFGE, and rep-PCR, these strains showed high similarity to the Group II strain 7a1. Sequencing and comparative analyses revealed that the genomes of T1 and EP aligned with that of the Group II model strain AAC00-1, over 97.88% and 99.22%, respectively. The virulence of T1, EP, and 7a1 determined on tomato, eggplant, and watermelon was similar and significantly higher than that of Group I strain M6. In contrast, M6 was more virulent on melon. Expression levels of seven virulence genes measured 24 hr after inoculation of tomato, eggplant, watermelon, and melon showed that the expression pattern was generally similar in strains 7a1, T1, and EP, whereas for M6 the expression was high only on melon. Overall, our results indicate that the solanaceous strains belong to Group II. To the best of our knowledge, this is the first study that reports characterization of A. citrulli strains isolated from solanaceous species. The fact that A. citrulli is able to naturally colonize and cause disease in non-cucurbit crops poses additional challenges for management of this important pathogen.     

FDI in Space Revisited: The Role of Spillovers on Foreign Direct Investment within the European Union

We estimate a spatial econometric interaction model for bilateral aggregate FDI stock data between 25 European Union member countries in 2010. We find evidence for spatial spillovers of foreign direct investment for three different types of spatial dependence. Our results document FDI spillovers between neighboring countries of FDI origin countries, neighboring countries of FDI destination countries as well as between neighboring countries of both FDI origin and destination countries. Relying on recently developed methods, we provide the first model‐consistent interpretation of marginal effects of market size (measured by GDP) as well as GDP per capita on bilateral FDI activity. Our research highlights the importance of taking into account spatial lags when estimating bilateral FDI gravity models.     

Mechanical behavior of composites reinforced with fibers caroa

Composites were prepared with 13, 23 30 and 40 % fiber and evaluated the mechanical performance in tensile, flexural and impact. The mechanical properties of these composites were also evaluated function of time at 110 °C thermal exposure. Caroa fibers were characterized by techniques such as thermal gravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the best mechanical properties were achieved for composites containing 23 to 30 % fiber. The incorporation of 23 % fiber caroa increased both the modulus of elasticity in the tensile test as the flexural strength and impact, the composite with 30 % fiber caroa showed higher tensile strength. The results show that the tensile and flexural strength of the composite decreased with time of thermal exposure. The thermal aging at 110 °C caused a decrease in tensile properties of the composites.     

Chemical markers for the evaluation of raw material hygienic quality in egg products

The aim of this research was to study uracil and lactic and acetic acids as chemical markers for hygienic quality evaluation of raw material in liquid pasteurized egg products. Uracil, absent in sound whole eggs, was formed in raw and pasteurized egg products as a consequence of high microbial contamination (>10(6) cfu/g) after a sufficient lag time, remaining stable at 4 degrees C but disappearing after 7 days of storage at 25 degrees C. Both lactic and acetic acids, starting from initial values of 1-7 mg/kg dry matter, presented trends similar to that of uracil; however, acetic acid never decreased during the storage of raw egg products. With few exceptions, all three metabolites were produced by Enterobacter cloacae, Escherichia coli, Morganella morganii, Serratia liquefaciens, Aeromonas hydrophyla, Pseudomonas fluorescens, Enterococcus avium, and Enterococcus faecalis, separately inoculated in whole egg samples. Uracil seems to be the most sensible marker, with a suggested limit corresponding to the detectable level.