Chemical markers for the evaluation of raw material hygienic quality in egg products

The aim of this research was to study uracil and lactic and acetic acids as chemical markers for hygienic quality evaluation of raw material in liquid pasteurized egg products. Uracil, absent in sound whole eggs, was formed in raw and pasteurized egg products as a consequence of high microbial contamination (>10(6) cfu/g) after a sufficient lag time, remaining stable at 4 degrees C but disappearing after 7 days of storage at 25 degrees C. Both lactic and acetic acids, starting from initial values of 1-7 mg/kg dry matter, presented trends similar to that of uracil; however, acetic acid never decreased during the storage of raw egg products. With few exceptions, all three metabolites were produced by Enterobacter cloacae, Escherichia coli, Morganella morganii, Serratia liquefaciens, Aeromonas hydrophyla, Pseudomonas fluorescens, Enterococcus avium, and Enterococcus faecalis, separately inoculated in whole egg samples. Uracil seems to be the most sensible marker, with a suggested limit corresponding to the detectable level.     

Sediment transport below a small alpine reservoir desilted by controlled flushing: field assessment and one-dimensional numerical simulation

Purpose

Sediment transport and riverbed sedimentation were investigated in an alpine stream below a small hydropower reservoir desilted by a controlled sediment flushing (CSF) operation. The term “controlled” refers to the operational tasks implemented to mitigate the downstream environmental impact of the operation. The experimental dataset acquired before, during, and after the CSF was also used to carry out and calibrate a one-dimensional sediment transport model of the monitored event.

Materials and methods

The investigated reservoir is located in the central Italian Alps, and its original storage was 160,000 m³, about 30% filled by a mixture of sand and silt/clay before the CSF. Downstream sediment concentration was controlled by releasing clear water from upstream reservoirs and regulating the work of earth-moving equipment in the emptied reservoir. A 3.6-km-long reach with average slope of 0.015 was monitored: concentration and grain size of suspended sediment were measured during the CSF and the riverbed alteration was evaluated by volumetric sampling and measurements of the deposits’ thickness. Sedimentation and River Hydraulics—One Dimensional (SRH-1D) was used to simulate sediment transport during the monitored CSF. Model parameters were calibrated by comparing the computed and the observed amount of sediment deposited along the study reach.

Results and discussion

Sediment flushing was carried out in October 2010 for 3 days. Ca. 16,000 m³ of sediment were evacuated, representing approximately 30% silt/clay and 70% sand. 2.4 Mm³ of clear water was released to reduce sediment concentration and increase transport capacity downstream. About 3000 m³ of sand was deposited in the study reach after the CSF, with maximum height up to 0.2 m. Although the riverbed before the CSF was simply set as mono-granular, after calibrating the parameters, good agreement was achieved between the depositional pattern computed by SRH-1D and the one observed, both in terms of deposit thickness and grain size of deposited sediment. The sensitivity analysis revealed a major role of the parameters controlling bed mixing processes in affecting the simulated deposition after the CSF.

Conclusions

Sediment below 0.1 mm in diameter was not detected in river deposits after the flushing: the effects on river biota associated with substrate clogging by very fine sediment were therefore minimized. After proper calibration, 1-D sediment transport modeling can effectively support the planning of CSF operations: to minimize the downstream environmental effects, concurrently achieving acceptable flushing efficiency, the analyzed scenarios as well as the model outputs need to be carefully evaluated from a multidisciplinary perspective.

     

Effect of dietary protein:energy ratio on intake, growth and metabolism of juvenile green abalone Haliotis fulgens

Juvenile green abalone Haliotis rufescens were grown under laboratory conditions at 21±1 °C and fed formulated diets consisting of different protein:energy ratios (mg protein/kcal), 62, 74, 85, 100, 108, for 60 days. The level of crude protein ranged from approximately 26% to 44% while the energy content remained constant at about 4.1 kcal g⁻¹. Growth ranged from 3.63 to 12.33 mg day⁻¹. The growth of abalone fed the 100 and 108 diets was significantly greater than that of each of the other diets. Protein efficiency ratio increased as the dietary protein content increased except for the T108 diet (44% crude protein). Abalone apparently consume food to satisfy an energy requirement. Caloric expenditure due to metabolism was estimated for abalone fed diets with protein ratios of 62, 85, 100. Energy loss due to respiration did not vary appreciably among abalone fed the different diets. The proportional distribution of dietary energy into fecal, digestible, growth, and metabolic energy was estimated for abalone fed these diets. Apparent dry matter digestibility was among the lowest for abalone fed the 100 P:E diet, but growth of abalone fed this diet was significantly higher than that of each of the other treatments except the 108 diet. Unexplained energy loss to achieve balance ranged from 7% to 28.5%, some of which is probably due to differential mucus and ammonia production. Results suggest a potential for the reduction of both dietary protein and lipid without causing any adverse effects on the growth response.     

UK deep‐sea conservation: Progress,lessons learned,and actions for the future

1. Despite a relatively long history of scientific interest fuelled by exploratory research cruises, the UK deep sea has only recently emerged as the subject of targeted and proactive conservation. Enabling legislation over the past 10 years has resulted in the designation of marine protected areas and the implementation of fisheries management areas as spatial conservation tools. This paper reflects on progress and lessons learned, recommending actions for the future.
2. Increased investment has been made to improve the evidence base for deep‐sea conservation, including collaborative research surveys and use of emerging technologies. New open data portals and developments in marine habitat classification systems have been two notable steps to furthering understanding of deep‐sea biodiversity and ecosystem functioning in support of conservation action.
3. There are still extensive gaps in fundamental knowledge of deep‐sea ecosystems and of cause and effect. Costs of new technologies and a limited ability to share data in a timely and efficient manner across sectors are barriers to furthering understanding. In addition, whilst the concepts of natural capital and ecosystem services are considered a useful tool to support the achievement of conservation goals, practical application is challenging.
4. Continued collaborative research efforts and engagement with industry to share knowledge and resources could offer cost‐effective solutions to some of these barriers. Further elaboration of the concepts of natural capital and ecosystem services will aid understanding of the costs and benefits associated with human–environment interactions and support informed decision‐making in conserving the deep sea.
5. Whilst multiple challenges arise for deep‐sea conservation, it is critical to continue ongoing conservation efforts, including exploration and collaboration, and to adopt new conservation strategies that are implemented in a systematic and holistic way and to ensure that these are adaptive to growing economic interest in this marine area.

     

Antiparasitic efficacy of dietary administration of trichlorfon (Masoten®) in the control of Neoechinorhynchus buttnerae (Neochinorhynchidae) in Colossoma macropomum (Serrasalmidae)

Aquaculture International - This study investigated the efficacy of trichlorfon against Neoechinorhynchus buttnerae, as well as its palatability, residue analysis, and the blood parameters of...     

Modified method for the analysis of free fatty acids in fish

The objective of this study was the development of a method for the quantification of free fatty acids (FFA) using less aggressive reactants against the handler and the environment than those used in the classic method of Lowry and Tinsley. The modified procedure is a variation of the Lowry and Tinsley method employing cyclohexane in place of benzene. The use of benzene is prohibited in certain work processes and laboratories, and the competent authority in each country is actively promoting research into harmless or less harmful products that could replace benzene. A comparison with the traditional AOCS titration method for oil analysis was performed. FFA content in mackerel frozen at -10 degrees C was measured according to the three methods over a 12 month period. The results showed similar values, and good correlations were obtained.     

Changes in Cd,Cu, Ni,Pb and Zn Fractionation and Liberation Due to Mussel Shell Amendment on a Mine Soil

Mining activities are related to relevant environmental pollution issues that should be controlled. We used sequential extractions to fractionate Cd, Cu, Ni, Pb and Zn retained on unamended or mussel shell‐amended mine soil samples, all of them treated with a mixture of the five heavy metals (total metal concentration of 1·57 mmol L⁻¹), after 1, 7 and 30 days of incubation. In addition, we used the stirred flow chamber technique to study the release of each of the five heavy metals from these different unamended and shell‐amended soil samples. The results indicate that the shell amendment caused a decrease in the most soluble fraction, while increasing the most recalcitrant (least mobile) fraction. With equivalent implications, the stirred flow chamber experiments showed that mussel shell amendment was associated to a decrease in heavy metal release and increased retention. The highest mussel shell dose and incubation time caused the most relevant changes in pH values and thus in metal retention, also indicating the importance of pH modifications in the mechanism of retention acting in the amended samples. In view of these results, the use of mussel shell amendment can be encouraged to increase heavy metal retention in acid mine soils, in order to minimise risks of environmental pollution. Copyright © 2016 John Wiley & Sons, Ltd.     

Microbial Communities in Long-Term Heavy Metal Contaminated Ombrotrophic Peats

High concentrations of heavy metals are known to be toxic to many soil organisms. The effects of long-term exposure to lower levels of metals on the soil microbial community are, however, less well understood. The southern Pennines of the U.K. are characterised by expanses of ombrotrophic peat soils that have experienced deposition of high levels of heavy metals since the mid to late 1800s. Concentrations of metals in the peat remain high but the effect of the contamination on the in-situ microbial communities is unknown. Geochemical and molecular polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and sequencing techniques were used to derive new information on the metal chemistry and microbial populations in peat soils from six locations in the southern Pennines. All sites were highly acidic (pH 3.00–3.14) with high concentrations of potentially toxic heavy metals, particularly porewater Zn and particulate-associated Pb. The results also reveal a split in site characteristics between the most polluted sites with the highest levels of bioavailable metals (Bleaklow, FeatherBed Moss and White Hill) and those with much lower bioavailable metals (Cowms Moor, Holme Moss and Round Hill). There was no difference in the number of dominant bacterial species between the sites but there were significant differences in the species composition. At the three sites with the highest levels of bioavailable metals, bacterial species with a high similarity to acidophilic sulphur- and iron-oxidizing bacteria and those from high metal environments were detected. The transformations carried out by these metal mobilising and acid producing bacteria may make heavy metals more bioavailable and therefore more toxic to higher organisms. Bacteria with similarity to those typically found in forest and grassland soils were documented at the three sites with the lowest levels of bioavailable metals. The data highlight the need for further studies to elucidate the species diversity and functionality of bacteria in heavy metal contaminated peats in order to assess implications for moorland restoration.     

Larval traits of the Caribbean amphidromous goby Sicydium punctatum (Gobioidei: Sicydiinae) in Guadeloupe

Amphidromous fish are the biggest contributor to the diversity of fish communities in river systems of Caribbean islands. Among them, Sicydium punctatum Perugia, 1896, which is endemic to the West Indies, represents the vast majority of fish in these rivers. The otolith microstructure and the biometry of S. punctatum postlarvae from Guadeloupe were investigated to explore the dispersal modalities of this species through an appreciation of the growth pattern, the pelagic larval duration (PLD) and the size‐at‐recruitment. The study was made on one cohort of 83 recruited postlarvae, fished at the Capesterre River's mouth on 2 November 2011. The mean (±SD) size‐at‐recruitment of the postlarvae was 24.6 ± 1.3 mm (range of 20.5–28.1 mm, n = 83). We found a mean (±SD) PLD of 72.2 ± 10.5 days (range of 54–101.5 days, n = 67). The growth rate estimated from the otolith increments showed a globally decreasing pattern during the marine larval phase. Growth rates at the beginning of the larval stage were significantly different between hatching periods, suggesting a relation between the hatching period and the growth rate in S. punctatum. This study adds on to the general understanding of the life cycle of S. punctatum in Guadeloupe that will help implement strategies to manage amphidromous fish populations in the Caribbean region.