The Effect of Knotting Method on the Structural Properties of Large Diameter Nonabsorbable Monofilament Sutures

OBJECTIVE: To evaluate the effect of knotting method on the mechanical properties of large diameter nonabsorbable monofilament suture materials. STUDY DESIGN: In vitro mechanical evaluation. METHODS: A conventional square knot was compared with the surgeon's knot, sliding half-hitch, and clamped square knot. Knotted suture loops were created in a uniform manner and acutely tensioned to failure (20 mm/min loading rate; n = 20 per knot type for each material). Stiffness, yield, and failure characteristics of USP #2 nylon, #2 polybutester, #2 polypropylene, 27 kg test monofilament nylon fishing line, and 27 kg nylon leader material were evaluated. RESULTS: Compared with a conventional square knot, a surgeon's knot decreased stiffness for #2 polypropylene, 27 kg fishing line, and 27 kg leader (P < .05). A sliding half-hitch weakened all materials except 27 kg leader (P < .05). Clamping the first throw of a square knot increased the stiffness of 27 kg leader loops (P < .05). CONCLUSIONS: Based on clinically relevant parameters (stiffness and yield), knotting method had no effect on #2 nylon and #2 polybutester. The surgeon's knot is not recommended for #2 polypropylene and 27 kg fishing line and leader material. A sliding half-hitch decreased the yield of leader material. Clamping the first throw of a square knot had no adverse effects on acute properties of tested materials; it increased the stiffness for leader material. CLINICAL RELEVANCE: Knotting method does influence the structural properties of suture materials and should be considered when tying knots under tension.     

Comparison of autogenous cancellous bone grafts obtained from the sternum and proximal portion of the tibia of llamas.

OBJECTIVE: To describe the anatomy of the sternum in llamas, define the surgical approach to the sternum for collection of cancellous bone graft tissue, and compare the histologic appearance of graft tissue obtained from the sternum with that obtained from the proximal portion of the tibia. DESIGN: Prospective study. ANIMALS: 12 llamas, 3 to 19 years old, that had been submitted for necropsy. PROCEDURE: Radiographs were taken of the sternum and left tibia of the llamas. Measurements of the sternum were determined from the radiographs and adjusted for magnification. Sternebrae volumes were estimated from these measurements. Anatomic dissections to the center of the fourth sternebra and the proximal portion of the tibia were made, and a surgical approach to the sternum was developed. Cancellous graft tissue was obtained from each site and submitted for histologic evaluation. RESULTS: Sternebrae 3, 4, and 5 were significantly larger in volume than the other sternebrae. The ventral aspect of the fourth sternebra was readily accessed for removal of graft tissue by making a 6-cm-long ventral midline incision centered 17 cm craniad to the xipnoid. Mean soft tissue thickness overlying the ventral aspect of the fourth sternebra was 3.1 cm. More tissue was obtained from the sternal (mean, 9.11 g) than from the tibial (mean, 5.16 g) sites. Sternal graft tissue consisted of trabecular bone spicules with predominantly hematopoietic marrow, whereas tibial tissue consisted of trabecular bone spicules with only fatty marrow. CONCLUSIONS AND CLINICAL RELEVANCE: The fourth sternebra in llamas is readily accessible for obtaining autogenous cancellous bone graft tissue that consists of predominantly hematopoietic marrow.     

Application of the polymerase chain reaction to detect fowl adenoviruses.

The possibility of using the polymerase chain reaction (PCR) for the detection of fowl adenoviruses (FAdV) was tested. The optimal reaction parameters were evaluated and defined for purified genomic DNA of type 8 fowl adenovirus (FAdV-8), and then the same conditions were applied for nucleic acid extracted from infected cells. One hundred picograms of purified viral DNA, or 250 FAdV-8-infected cells, were detected by ethidium bromide staining of the PCR products in agarose gels. The sensitivity was increased to 10 pg purified viral DNA, or 25 infected cells, when the PCR products were hybridized with a specific labeled probe. Several field isolates of FAdV and the CELO virus (FAdV serotype 1) could be amplified by the same primers and conditions, but the size of the amplicons was smaller than that for the FAdV-8 PCR product. Other avian viruses and uninfected cell cultures tested negative.     

Studien zur Bekämpfung von Phytophthora ramorum an Rhododendron im Rahmen der Entwicklung eines Behandlungskonzeptes für Park- und Gartenanlagen

In this study dealing with the development of management strategies for P. ramorum in Rhododendron stands several plant protection and fertilizer products were tested for their suitability to control this pathogen on Rhododendron. Tests were conducted on young potted plants and abscised leaves, using the following products: phosphite (Nutri-Phite^® PK), copper hydroxide (Cuprozin^® liquid), Bacillus subtilis (Serenade^®), a mycorrhizal preparation, and a product based on ‘effective microorganisms’ (EMa). Although transmission of the pathogen from infected to healthy plants was successfully inhibited by phosphite, Cu hydroxide and B. subtilis, subsequent tests showed that only phosphite and Cu hydroxide had a significant effect on disease development. All other preparations based on antagonistic or growth promoting microorganisms had no preventive or curative effect. While B. subtilis tended to increase disease symptoms, the remaining products caused a slight reduction of disease severity only. In contrast, phosphite and Cu hydroxide almost completely inhibited infection by P. ramorum. Therefore, in field situations, the use of the ecologically safe, systemic phosphite against P. ramorum in Rhododendron stands appears to be reasonable and advisable. Along with other supporting measures within the framework of a management strategy, this will allow to prevent or slow down further spread of the disease.     

In Vitro Mechanical Comparison of 2.0 and 2.4 Limited‐Contact Dynamic Compression Plates and 2.0 Dynamic Compression Plates of Different Thicknesses

Objective: To compare the bending structural stiffness and bending strength of thick and thin 2.4 mm limited contact dynamic compression plates (2.4 LC‐DCP), 2.0 mm LC‐DCP (2.0 LC‐DCP), and 2.0 dynamic compression plates (2.0 DCP). Study Design: In vitro mechanical study. Methods: Two thicknesses of 2.4 LC‐DCP, 2.0 LC‐DCP, and 2.0 DCP stainless‐steel plates were tested in 4‐point bending. Data were collected during bending until implants plastically deformed. Bending structural stiffness and bending strength were determined from load displacement curves. Mechanical properties were compared between plates and the effects of plate type, size, and thickness on stiffness and strength were assessed using ANOVA. Results: The thick 2.4 LC‐DCP implant was the stiffest and strongest; the thin 2.0 DCP implant was most compliant and weakest. Larger sized plates, thicker plates, and limited contact design of plates enhanced stiffness and strength. For the plates studied, plate size had a larger effect than plate type or thickness on stiffness and strength. Conclusion: Increasing the size (width) and thickness of plates increases both the bending structural stiffness and strength. For the plates studied, LC‐DCP implants were stiffer and stronger than DCP implants. Clinical Relevance: Plate bending structural stiffness and strength can be most effectively enhanced by using a larger sized plate, but gains can also be achieved by using a thicker plate and/or an LC‐DCP instead of a DCP implant when possible.     

Spatial scale effects on conservation network design: trade-offs and omissions in regional versus local scale planning

Ecological patterns and processes operate at a variety of spatial scales. Those which are regional in nature may not be effectively captured through the combination of conservation plans derived at the local level, where land use planning frequently takes place. Conversely, regional conservation plans may not identify resources important for conservation of intraregional ecological variation. We compare modeled conservation networks derived at regional and local scales from the same area in order to analyze the impact of scale effects on conservation planning. Using the MARXAN reserve selection algorithm and least cost corridor analysis we identified a potential regional conservation network for the Central Valley ecoregion of California, USA, from which we extracted those portions found within five individual counties. We then conducted the same analysis for each of the five counties. An overlay of the results from the two scales shows a general pattern of large differences in the identified networks. Especially noteworthy are the trade-offs and omissions evident at both scales of analysis and the disparateness of the identified corridors that connect core reserves. The results suggest that planning efforts limited to one scale will neglect biodiversity patterns and ecological processes that are important at other scales. An intersection of results from the two scales can potentially be used to prioritize areas for conservation found to be important at several spatial scales.     

Critical Loads of Acidity to Protect and Restore Acid-Sensitive Streams in Virginia and West Virginia

The purpose of the research described here is to apply a new approach for generating aquatic critical load (CL) and exceedance calculations for an important acid-sensitive region of the eastern USA. A widespread problem in regional aquatic acidification CL modeling for US ecosystems has been the lack of site-specific weathering data needed to derive accurate model CL estimates. A modified version of the steady-state water chemistry CL model was applied here to estimate CL and exceedances for streams throughout acid-sensitive portions of Virginia and West Virginia. A novel approach for estimating weathering across the regional landscape was applied, based on weathering estimates extracted from a well-tested, process-based watershed model of drainage water acid?Cbase chemistry and features of the landscape that are available as regional spatial data coverages. This process allowed extrapolation of site-specific weathering data from 92 stream watersheds to the regional context in three ecoregions for supporting CL calculations. Calculated CL values were frequently low, especially in the Blue Ridge ecoregion where one-third of the stream length had CL?<?50?meq/m²/year to maintain stream ANC at 50???eq/L under steady-state conditions. About half or more of the stream length in the study region was in exceedance of the CL for long-term aquatic resource protection under assumed nitrogen saturation at steady state. Land managers and air quality policy makers will need this information to better understand responses to air pollution emissions reductions and to develop ecoregion-specific air pollution targets.