Prediction of dry veneer stiffness using near infrared spectra from transverse section of green log

This study examined the feasibility of near infrared spectroscopy as a novel technique for log assessment on the basis of wood property. Near infrared (NIR) spectra were obtained from the transverse section of green log and multivariate regression analysis was carried out to predict the stiffness of veneer processed from the log. The stiffness of the veneer was dynamic modulus of elasticity measured using ultrasonic method. The calibrations of veneer stiffness had moderate relationships between measured and NIR-predicted values, with regression coefficients ranging from 0.84 to 0.88. The calibration equations were applied to the test set and it was found that predictions were also well fitted, with regression coefficients ranging from 0.67 to 0.89. The results indicate that the variation of wood stiffness within the logs could be assessed using the NIR spectra from the cross-section of logs. The spectra were obtained from green condition of the log and the stiffness of veneer was measured after kiln drying. Thus, the results imply that the wood stiffness in dry condition could be predicted using the spectra collected from green logs. If the models obtained in this study put into the imaging system, the two-dimensional map of the stiffness would be visualized on the cross-section of logs. The NIR spectroscopy coupled with imaging system could compensate the weak point of the traditional methods for log assessment.     

Sexing of Dog Sperm by Fluorescence In Situ Hybridization

Effective preselection of sex has been accomplished in several species of livestock and also in humans using the flow cytometric sperm sorting method. A guaranteed high sorting accuracy is a key prerequisite for the widespread use of sperm sexing. The standard validation method is flow cytometric remeasurement of the DNA content of the sexed sperm. Since this method relies on the same instrument that produced the original sperm separation, it is not truly independent. Therefore, to be able to specifically produce either male or female offspring in the dog, we developed a method of direct visualization of sex chromosomes in a single sperm using fluorescence in situ hybridization (FISH) as a validation method. Denaturation of canine spermatozoa by immersion in 1 M NaOH for 4 min yielded consistent hybridization results with over 97% hybridization efficiency and a good preservation of sperm morphology. There was no significant difference between the theoretical ratio (50:50) and the observed ratio of X- and Y-chromosome-bearing spermatozoa in any of the three dogs. In addition, the mean purities of flow-sorted sex chromosomes in spermatozoa of the three dogs were 90.8% for the X chromosome fraction and 89.6% for the Y chromosome fraction. This sorting was evaluated by using the dual color FISH protocol. Therefore, our results demonstrated that the FISH protocol worked reliably for both unsorted and sexed sperm samples.     

Production of Diabetic Offspring Using Cryopreserved Epididymal Sperm by In Vitro Fertilization and Intrafallopian Insemination Techniques in Transgenic Pigs

Somatic cell nuclear transfer (SCNT) is a useful technique for creating pig strains that model human diseases. However, production of numerous cloned disease model pigs by SCNT for large-scale experiments is impractical due to its complexity and inefficiency. In the present study, we aimed to establish an efficient procedure for proliferating the diabetes model pig carrying the mutant human hepatocyte nuclear factor-1α gene. A founder diabetes transgenic cloned pig was generated by SCNT and treated with insulin to allow for normal growth to maturity, at which point epididymal sperm could be collected for cryopreservation. In vitro fertilization and intrafallopian insemination using the cryopreserved epididymal sperm resulted in diabetes model transgenic offspring. These results suggest that artificial reproductive technology using cryopreserved epididymal sperm could be a practical option for proliferation of genetically modified disease model pigs.     

Novel method for improving the antioxidative properties of fish meat by direct injection of sodium l-ascorbate into the blood vessels of live fish

The color of the red muscle of pelagic fish is used as an indicator of freshness, and sustaining a bright red color is important for maintaining the commercial value of pelagic fish. Feeding fish with antioxidant compounds can delay metmyoglobin (metMb) formation, but the process requires long-term feeding. Live cultured Japanese horse mackerel Trachurus japonicus were used in this study. After anesthetization, 2 ml of blood was drawn from blood vessels, and a parenteral solution including an antioxidant compound was injected. Browning, metMb formation, and lipid oxidation of dark muscle during chilled storage were delayed by injecting sodium l-ascorbate as an antioxidant compound in the blood vessels of live fish.     

Anthracnose of <Emphasis Type="Italic">Polygonatum falcatum</Emphasis> caused by <Emphasis Type="Italic">Colletotrichum dematium</Emphasis>

Severe spotting, blight and drop of leaves caused by Colletotrichum dematium were found on potted plants of Polygonatum falcatum, a liliaceous ornamental, in open fields in Kagawa Prefecture, Japan, in May 2001. This new disease was named anthracnose of P. falcatum. Keisuke Tomioka, Jouji Moriwaki, Toyozo Sato contributed equally to this work. The fungal isolate and its nucleotide sequence data obtained in this study were deposited in Genebank, National Institute of Agrobiological Sciences and the DDBJ/EMBL/GenBank databases under accessions MAFF239500 and AB334523, respectively.     

Black band of Jew’s marrow caused by <Emphasis Type="Italic">Lasiodiplodia theobromae</Emphasis>

Stem rot and wilt of Jew’s marrow (nalta jute, Corchorus olitorius) were found on Is. Okinawa, Okinawa Prefecture, Japan, in March 2000. An anamorphic fungus, Lasiodiplodia theobromae was isolated repeatedly from the diseased plants and demonstrated to cause the disease. We coined the Japanese name “kurogare-byô” of Jew’s marrow for the present disease because it was new to Japan, although it had already been reported in India and Bangladesh as black band of the plant.     

Gray mold of pearl lupine caused by <Emphasis Type="Italic">Botrytis cinerea</Emphasis>

Severe blight of stems, leaves and pods caused by Botrytis cinerea was found on pearl lupine (Lupinus mutabilis), a legume crop, grown in Kagawa Prefecture, Japan, in March–June 1996–2002. This disease was named “gray mold of pearl lupine” as a new disease. One of the fungal isolates obtained in this study was deposited in Genebank, National Institute of Agrobiological Sciences as accession MAFF238557.     

Construction of a linkage map and identification of DNA markers linked to Fom-1, a gene conferring resistance to Fusarium oxysporum f.sp. melonis race 2 in melon

Resistance to Fusarium oxysporum f.sp. melonis race 2 is conferred by a single dominant gene, Fom-1 in melon. Here, we identified DNA markers tightly linked to Fom-1 that could be used for marker assisted selection in breeding programs. First, we developed 125 F₂ plants derived from the cross between melon lines P11 (fom-1fom-1) and MR-1 (Fom-1Fom-1). Using the F₂ population, we constructed a linkage map including 14 SSR markers which had not been mapped previously. Fom-1 was confirmed to be allocated to linkage group 7. Then, we identified four AFLP markers using bulked segregant analysis. The AFLP marker TAG/GCC-470 was completely linked to Fom-1 and other three markers were mapped near Fom-1. TAG/GCC-470 and TCG/GGT-400 were respectively converted to STS and CAPS markers. Usefulness of DNA markers was confirmed in the analysis with several melon cultivars and lines.     

Comparative study between full cell and passive impregnation method of wood preservation for laser incised Douglas fir lumber

In this study, the ability of passive impregnation of Douglas fir (Pseudotsuga menziesii Franco) lumber was compared with a conventional full cell method. With an incising density of 10,000 holes/m² carried out by CO₂ laser, square Douglas fir lumber was treated by both passive impregnation and full cell method for 6 h and 50 min. Different incising densities were also used in passive impregnation to examine the optimum incising density. It was observed that there was no significant difference between these two methods regarding absorption of liquid, moisture content after dipping and penetrated area both at cross and longitudinal sections. However, the value was higher in case of full cell method. Regarding different incising densities, absorption and penetration of liquid was similar for 10,000 and 7,500 holes/m² but it was low for 5,000 holes/m². Therefore, it can be concluded that an incising density of 7,500 holes/m² is the optimum for passive impregnation. The absorption of liquid and its distribution in wood indicates that this non-pressure passive impregnation method can be a good preservation method for impermeable lumber and can be an alternative to full cell method.     

Influence of heating and drying history on micropores in dry wood

To investigate the influence of heating and drying history on the microstructure of dry wood, in addition to the dynamic viscoelastic properties, CO₂ adsorption onto dry wood at ice.water temperature (273 K) was measured, and the micropore size distribution was obtained using the Horvath-Kawazoe (HK) method. Micropores smaller than 0.6 nm exist in the microstructures of dry wood, and they decreased with elevating out-gassing temperature and increased again after rewetting and drying. Dry wood subjected to higher temperatures showed larger dynamic elastic modulus (E′) and smaller loss modulus (E″). This is interpreted as the result of the modification at higher temperature of the instability caused by drying. Drying history influenced the number of micropores smaller than 0.6 nm in dry wood not subjected to high temperature, although the difference in the number of micropores resulting from the drying history decreased with increasing out-gassing temperature. A larger number of micropores smaller than 0.6 nm exist in the microstructure of dry wood in more unstable states, corresponding to smaller E′ and larger E″ than in the stable state. Consequently, unstable states are considered to result from the existence of temporary micropores in the microstructures of dry wood, probably in lignin. Part of this report was presented at the 55th Annual Meeting of the Japan Wood Research Society, Kyoto, March 2005, and at the 56th Annual Meeting of the Japan Wood Research Society, Akita, August 2006