Changes in micropores in dry wood with elapsed time in the environment

To investigate the changes in microstructures of wood with elapsed time in the environment, CO₂ adsorption onto dry wood was measured at ice-water temperature (273 K) for samples aged from 0.1 years to over 1000 years. The micropore size distribution was obtained using the Horvath-Kawazoe method. Micropores smaller than 0.6 nm in wood decreased in number with elapsed time in the environment, and a negative correlation was found between cumulative pore volume for pores smaller than 0.6 nm and elapsed time in the environment. Cumulative pore volume in the 1000-year sample was almost half of that in the 0.1- year sample. Micropores smaller than 0.6 nm in wood with a few decades or more of elapsed time increased in number after rewetting and drying. Consequently, microstructures of wood with longer time elapsed in the environment were considered to be more stable, because of longer-term thermal motion and possibly more repeated moisture adsorption and desorption and/or temperature variation in the environment.     

Influence of histories on dynamic viscoelastic properties and dimensions of water-swollen wood

The influences of heating history, cooling method, and cooling set on microstructures and the mechanical properties of water-swollen wood were studied by measuring viscoelastic properties and dimensional changes while elevating temperatures between 20°C and 90°C. Both the viscoelastic properties and dimensional changes of waterswollen wood in the first heating process were quite different from those in the other heating processes. The results revealed that the molecular state of green wood around room temperature was stabilized and could not return to this state if drying or heating was carried out. Cooling methods greatly affected the viscoelastic properties, while they hardly affected dimensional changes when the temperature was elevated. Localized stress in the microstructures of water-swollen wood produced by quenching affected the mechanical properties in the heating process, while external stress less than the proportional limit caused by a cooling set had no effect. This revealed that much greater localized stress linked to the instability of waterswollen wood than the external stress in relation to the cooling set occurred. Part of this report was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003     

Creep and stress relaxation behavior for natural cellulose crystal of wood cell wall under uniaxial tensile stress in the fiber direction

We investigated the temporal changes in creep and stress relaxation behavior in both microscopic crystalline cellulose and macroscopic strain of wood specimen using Japanese cypress (Chamaecyparis obtusa Endl.) to understand the viscoelastic properties of wood cell walls. Specimens 600 µm in thickness were observed by the X-ray diffraction and submitted to tensile load. The crystal lattice strain of (004) plane and macroscopic strain of specimen were continuously detected during creep and stress relaxation tests. It was found that the creep compliance based on macroscopic strain showed a gradual increase after instantaneous deformation due to loading and then the parts of creep deformation remained as permanent strain after unloading. On the other hand, crystal lattice strain showed a different behavior for macroscopic strain; it kept a constant value after instantaneous deformation due to loading and then increased gradually after a certain period of time. These differences between macroscopic and microscopic levels were never found in the stress relaxation tests in this study. Relaxation modulus at the macroscopic level only showed a decreasing trend throughout the relaxation process. However crystal lattice strain kept a constant value during the macroscopic relaxation process. In addition, the microfibril angle (MFA) of wood cell wall has a role of mechanical behavior at microscopic level; crystal lattice strains were smaller with increasing MFA at both creep and relaxation processes. Creep compliance and stress relaxation modulus at the macroscopic level decreased and increased with increasing MFA, respectively. Our results on the viscoelastic behavior at microscopic level evidenced its dependency on MFA.     

Effect of dietary kapok oil supplementation on growth performance,carcass traits,meat quality and sensory traits of pork in finishing‐pigs

Kapok seed and oil from the tropical zone are widely used as pig feed to harden porcine fat in Japan. This study evaluated the effect of dietary kapok oil supplementation on pork quality and sensory traits. Five Duroc pigs each were assigned to an experimental group supplemented with kapok oil and a control group. Dietary kapok oil supplementation had no effect on growth performance and intramuscular fat content in the Longissimus dorsi muscle (LM). Supplemental kapok oil increased saturated fatty acid contents in subcutaneous and intramuscular fat and decreased monounsaturated fatty acid levels (P < 0.05). Off‐flavor detection by a trained panel was higher in the experimental than the control group (P < 0.05), but tenderness, juiciness, texture and flavor intensity of LM chops were similar in both groups. The overall palatability of pork as judged by a consumer panel decreased with kapok oil supplementation (P < 0.01). These results indicate that while growth performance, intramuscular fat contents and carcass characteristics were unchanged, while dietary kapok oil supplementation makes firm fat to prevent inferior soft fat in pork, it can lower the palatability of pork due to a decrease in monounsaturated fatty acids.     

Factors that determine grain weight in rice under high-yielding aerobic culture: The importance of husk size

In water-saving rice culture, yield is unstable because spikelet number per unit area and grain weight fluctuate according to water availability. In this study, we investigated the factors that determine grain weight in aerobic culture. We grew four rice varieties in non-puddled, unsaturated (aerobic) soils with a soil water potential at 20-cm depth kept above −60 kPa and in continuously flooded culture in two years. We found a significant variety × water interaction in grain weight in 2009: weights under aerobic culture were 6% and 13% larger than under flooded culture in Sasanishiki and IRAT109, respectively, versus 4% and 10% smaller in Habataki and Takanari. There was no significant variety × water interaction in grain weight in 2010. Sink activity (grain sucrose synthase activity) and source capacity (biomass production and nonstructural carbohydrate content in vegetative tissue) per plant during ripening were higher under aerobic culture than under flooded culture in both years. However, an excessive increase in spikelet number per unit area in Takanari under aerobic culture in 2009 reduced the source capacity per spikelet and single husk size, decreasing grain weight. In 2010, frequent soil drying under aerobic culture during the late reproductive period (around 20 days preceding heading) reduced single husk size, thereby decreasing grain weight. We found that sink activity and source capacity per plant could be both higher under aerobic culture during the ripening period, producing larger grain weight at a soil water potential above-40 kPa at a 20-cm depth relative to those under flooded culture. In contrast, greater drying under aerobic culture during the late reproductive period reduced single husk size, thereby reducing grain weight.     

Physiological characterization of introgression lines derived from an indica rice cultivar, IR64, adapted to drought and water-saving irrigation

Water scarcity threatens sustainable rice production in many irrigated areas around the world. To cope with the scarcity, aerobic rice culture has been proposed as a promising water-saving technology. The objective was to elucidate the physiological attributes behind the performance of rice introgression lines in water-saving culture. We evaluated yield potential and physiological adaptation traits to water deficit of BC₃-derived lines with the genetic background of an elite indica cultivar, IR64, in the field and in pot experiments. One line, YTH183, had 26% higher yield than IR64 under non-stress conditions (895 vs. 712 g m⁻² on average). This was attributed to enlarged sink capacity due to large grain size, which contributed to more efficient use of assimilates and hence a higher harvest index. YTH183 also showed better dehydration avoidance under intermittent soil drying, due to the adaptive response of deep rooting to water deficiency. The grain yield of YTH183 exceeded that of IR64 by 92-102% under moderate water deficit caused by limited irrigation in aerobic rice culture (143 vs. 72 g m⁻²). Two introgressed segments on chromosomes 5 and 6 might, at least in part, confer the higher yield potential and greater dehydration avoidance in YTH183 simultaneously. Advanced backcross breeding combined with molecular genetics and physiological characterization of introgressed segments would be effective for developing new rice cultivars with high yield potential and drought adaptation traits.     

Micropores and mesopores in the cell wall of dry wood

To investigate micropores and mesopores in the cell walls of dry wood, CO₂ gas and N₂ gas adsorption onto dry wood were measured at ice-water temperature (273 K) and liquid nitrogen temperature (77 K). CO₂ gas adsorption isotherms obtained were used for determining micropore volumes smaller than 0.6 nm by the HK method (Horvath-Kawazoe method), and N₂ gas adsorption isotherms obtained were used for determining the mesopore volume between 2 nm and 50 nm by the Barrett-Joyner-Halenda (BJH) method. Micropores and mesopores existed in cell walls of dry wood, and the cumulative pore volume was much larger for micropores than for mesopores. Micropores in the cell wall of dry wood decreased with elevating heat treatment temperature, and the decreased micropore was reproducible by wetting and drying. Mesopores did not decrease so much with elevating heat treatment temperature. Micropore volumes for the softwood Hinoki and the hardwood Buna were compared. A larger amount of micropores existed in hardwood Buna than in softwood Hinoki, and this relationship was considered to correspond to the difference in thermal softening properties for lignin in water-swollen Hinoki and Buna. This result probably indicates that micropores in the cell walls of dry wood relate to the structure of lignin.     

Keratoconus in a cynomolgus monkey

In a seven-year-old male cynomolgus monkey, erythema of the upper eyelid and forehead and corneal opacity, edema and conical protrusion in the eye were observed. At necropsy, ophthalmological and serological examinations revealed binocular corneal opacity and conical protrusion and a high IgE level, respectively. Thinning of the epithelium and stroma of the cornea were noted histopathologically. At the center of the corneal epithelium, the number of epithelial cells was reduced, their cytoplasm was poorer and the basal cells were flatter than at the periphery. Bowman's membrane was folded with partial loss or breakage. Collagen fibers were compacted or disarranged, and the keratocytes were increased in the stroma, with focal pyknosis or loss of the endothelium and folding of Descemet's membrane. Electron microscopical examination revealed atrophy of the corneal epithelial basal cells. This is the first report of a case of keratoconus in a cynomolgus monkey.     

Acidulocompost,a food waste compost with thermophilic lactic acid fermentation: its effects on potato production and weed growth

Acidulocomposting recycles food wastes by means of thermophilic lactic acid fermentation. This process can decrease ammonia volatilization and odor emission during processing and produce compost with high nitrogen (N) content. To compare the yield of potatoes (Solanum tuberosum L. ‘Dansyakuimo’) and the suppression of weeds with acidulocompost (AC) and those with conventional composts and inorganic fertilizer (IF), we conducted field experiments in Miyagi Prefecture, northeastern Japan. Potatoes were cultivated in 2008 and 2009 in an Andosol field treated with AC, conventional food waste compost (FWC), poultry manure compost (PMC), cattle manure compost (CMC), IF, or no fertilizer (NF). AC, but not the other treatments, delayed the emergence of potatoes, and suppressed the emergence of weeds, but it did not inhibit potato growth during the late growth stage or yield. Potato N uptake and tuber yield with AC were significantly higher than those with NF and similar to those with FWC, PMC, and IF. The N uptake efficiencies (ratio of difference between N uptake in the treatment and the control to added N) for AC (10.4–12.7% in 2008 and 2009) were similar to those for FWC and PMC (10.2–13.1%), higher than those for CMC (–1.3 to 6.3%), but significantly lower than those for IF (30.2–42.3%). Our findings indicate that AC has an N supply capacity similar to those of FWC and PMC and additionally suppresses the emergence and growth of weeds.