Colorimetric evaluation of phenolic content and GC-MS characterization of phenolic composition of alimentary and cosmetic argan oil and press cake

The global phenolic content of argan oil and press cake samples (alimentary and cosmetic) was evaluated using the Folin-Ciocalteu colorimetric method and the phenolic composition of argan oil (alimentary and cosmetic) and press cake (alimentary) samples were analyzed by GC-MS after extraction with 80:20 (v/v) methanol:water and silylation. Identification of chromatographic peaks was made by mass selective detection. Nineteen simple phenols were detected, 16 in press cake, 6 in the alimentary oil, and 7 in the cosmetic oil, among which 15 compounds [3-hydroxypyridine (3-pyridinol), 6-methyl-3-hydroxypyridine, catechol, resorcinol, 4-hydroxybenzyl alcohol, vanillin, 4-hydroxyphenylacetic acid, vanillyl alcohol, 3,4-dihydroxybenzyl alcohol, 4-hydroxy-3-methoxyphenethyl alcohol, methyl 3,4-dihydroxybenzoate, hydroxytyrosol, protocatechuic acid, epicatechin, and catechin] were identified for the first time in such materials.     

Effect of bensulfuron-methyl (a sulfonylurea herbicide) on the soil bacterial community of a paddy soil microcosm

The effect of bensulfuron-methyl (BSM) on a soil microbial community in a model paddy microcosm was studied. Total bacterial numbers in the overlying water and surface soil were monitored for 2 months after the application of BSM at the field rate and a ten-fold field rate. Pentachlorophenol (PCP) was used for comparison. Neither chemical affected the total bacterial numbers remarkably, either in the overlying water or in the surface soil. In contrast, the nitrification potential was significantly suppressed by the BSM application. The bacterial community structure, as evaluated by the denaturing gradient gel electrophoresis (DGGE) of PCR amplification products from bacterial 16S rDNA, was unaffected by the BSM treatments over 8 weeks in the surface soil, compared with the control (no pesticide). In contrast, the surface soil exposed to PCP at a ten-fold field rate showed different patterns from the controls at 4 weeks and 8 weeks after application. The DGGE patterns of the overlying water were much more variable than those of the surface soil in any treatments. Cluster analysis showed that the BSM plots were classified within the same group as the control at 1 week after application and that the BSM and PCP plots from 2 weeks onward after application were grouped differently from the control. Of 22 clones excised from the DGGE gels, 20 clones belonged to the Proteobacteria and two belonged to the Verrucomicrobia. It was considered that the impact of BSM on the overall microbial community (total numbers, community structure of soil) was negligible, although BSM had an impact on some specific functions of the soil microbial community (nitrification) and a part of the community (overlying water).     

Antimicrobial and physicochemical properties of chitosan-HPMC-based films

To prepare composite films from biopolymers with anti-listerial activity and moisture barrier properties, the antimicrobial efficiency of chitosan-hydroxy propyl methyl cellulose (HPMC) films, chitosan-HPMC films associated with lipid, and chitosan-HPMC films chemically modified by cross-linking were evaluated. In addition, the physicochemical properties of composite films were evaluated to determine their potential for food applications. The incorporation of stearic acid into the composite chitosan-HPMC film formulation decreased water sensitivity such as initial solubility in water and water drop angle. Thus, cross-linking of composite chitosan-HPMC, using citric acid as the cross-linking agent, led to a 40% reduction in solubility in water. The water vapor transfer rate of HPMC film, approximately 270 g x m(-2) x day(-1) x atm(-1), was improved by incorporating chitosan and was further reduced 40% by the addition of stearic acid and/or cross-linking. Anti-listerial activity of films was determined on solid medium by a numeration technique. Chitosan-HPMC-based films, with and without stearic acid, inhibited the growth of Listeria monocytogenes completely. On the other hand, a loss of antimicrobial activity after chemical cross-linking modification was observed. FTIR and 13C NMR analyses were then conducted in order to study a potential chemical modification of biopolymers such as a chemical reaction with the amino group of chitosan. To complete the study, the mechanical properties of composite films were determined from tensile strength assays.     

Concentrations of metals (zinc, copper, cadmium, and mercury) in three domestic ducks in France: Pekin, Muscovy, and Mule ducks

The role of different factors such as biological material (tissues, organs) and trophic condition (overfeeding or not) in the metal accumulation was studied in three genotypes of ducks (Pekin, Muscovy, and Mule) under breeding conditions. Results showed that overfeeding decreased the concentration in Cd, Cu, and Zn through the dilution process. In contrast, mercury concentration increased with this method. A relation between lipidic metabolism of genotypes and the distribution of this metal in biological material was found. Domestic ducks were little contaminated, but a low chronic contamination in Cd was observed, probably coming from the food. Due to the low levels of contamination observed in these breeding ducks, they can be considered as a good control for further contamination studies and comparison with accumulation levels recorded in the field. The impact of feeding condition on accumulation showed the importance of taking into account the life cycle of birds before studying their contamination and the impact of pollutants.     

Impact of a treatment with phospholipase A2 on the physicochemical properties of hen egg yolk

Changes in physicochemical properties of egg yolk were investigated after a treatment with phospholipase A 2 (PLA 2), where phospholipids are converted in lyso-phospholipids. Protein solubility and protein denaturation before and after modification by PLA 2 was monitored as well as the functionality of egg yolk by means of interfacial tension. Enzymatic treatment showed a significant impact on the properties of egg yolk with regard to protein solubility and denaturation behavior. To gain a closer insight, egg yolk was separated in its water-soluble fraction called plasma and the insoluble granules. Both fractions were separately modified by PLA 2. The granule fraction shows a higher protein solubility, and the plasma proteins show very high heat stability after modification by PLA 2. Hypotheses regarding related changes in the low-density lipoprotein (LDL) particles are discussed. Results suggest that significant differences in the functional properties of untreated and PLA 2-modified egg yolk do not primarily result from the existence of lyso-phospholipids but from structural changes in egg yolk granules and LDL particles.     

冬播麦区Glu-1和Glu-3位点变异及1B/1R易位与小麦加工品质性状的关系

 贮藏蛋白组成是决定小麦加工品质的重要因素。本文调查了我国冬播麦区251份主栽品种和高代品系的高分子量麦谷蛋白亚基（HMW-GS）、低分子量麦谷蛋白亚基（LMW-GS）和1B/1R易位的分布状况，研究了它们与加工品质性状的关系。结果表明，品质较差的HMW-GS N、7+9、2+12和LMW-GS Glu-A3a与Glu-B3j（1B/1R易位）在冬播麦区分布较广，频率分别为39.4%、45.0%、59.8%、37.1%和44.6%。HMW-GS和LMW-GS等位变异对籽粒蛋白质含量影响较小，对SDS沉降值、和面时间与耐揉性的加性和互作效应达1%的显著水平。按位点对加工品质性状的贡献大小，Glu-D1>Glu-B3>Glu-B1>Glu-A3>Glu-A1；就单个亚基而言，Glu-A1位点，1>2*>N；Glu-B1位点，7+8>14+15>7+9；Glu-D1位点，5+10>4+12>2+12；Glu-A3位点，Glu-A3d>Glu-A3a>Glu-A3c>Glu-A3e，Glu-B3位点； Glu-B3d>Glu-B3b>Glu-B3f >Glu-B3j。1B/1R易位对SDS沉降值、和面时间和耐揉性等加工品质性状有显著负面效应。通过选择优质高低分子量麦谷蛋白亚基和淘汰1B/1R易位系，将有助于提高我国小麦的面筋质量。     

Correction to: Coupling landscape graph modeling and biological data: a review

Landscape Ecology - In the original publication of the article, the sixth author name has been misspelt. The correct name is given in this Correction. The original article has been corrected.     

大豆抗菌核病的全基因组关联研究

找到大豆与抗菌核病强关联的候选位点或候选基因,为抗病基因克隆和抗病分子标记开发提供借鉴,服务大豆抗菌核病育种。对126个加拿大大豆品种的基因组DNA用ApekⅠ酶消化后Illumina Hiseq2000平台测序进行基因分型,供试的126个材料用棉垫接种核盘菌菌丝体进行表型鉴定。采用Structure 2.3.4、SPSS 20.0、TASSEL 5.0和PLINKv 1.07软件分别模拟群体遗传结构、二元主成分分析、邻接法聚类,进行SNP-phenotype和Haplotype-phenotype的关联分析(只考虑加性效应)。最小等位基因频率0.01过滤,得到30 125个SNPs。主成分及群体结构聚类结果中度一致,将126个供试材料划分为2个组群,Kappa聚类一致度检验K=0.44。邻接法(The neighbor-joining algorithm,NJ)聚为3个组群。α≤0.05时,在单个SNP-phenotype的关联研究中,最强关联在3号染色体物理位置34387780、34387823和34387841处(P值都为8.669E-7),可分别解释表型变异的17.80%,其次在20,1,4,17号染色体上。Haplotype-phenotype的关联分析中,最强关联在17号染色体物理位置5575883/5647814/5648648/5734897处(P值为1.038E-6),可解释表型变异的17.56%。200 kb范围内,3号染色体上的候选基因有Glma.03g129100、Glma.03g129200、Glma.03g129300、Glma.03g129500、Glma.03g129800、Glma.03g129900。17号染色体上为Glma.17g071300、Glma.17g072200、Glma.17g073300。     

中国沙塘鳢属鱼类的整理和一新种的叙述

本文应用沙塘鳢属鱼类的外形特征、头部感觉管孔的有无及感觉乳突之排列方式作为分类依据，对采自中国各河川800余尾沙塘鳢属鱼类进行较全面．系统的研究，还对比产于日本和韩国的种类，解决了中国沙塘鳢属长期混淆不清的分类问题．中国沙塘鳢属鱼类有4种(其中有一新种)，即河川沙塘鳢O．optamophila(Gǖnther)，海丰沙塘鳢O．haifengensis Chen.，鸭绿沙塘鳢(新种)O．yaluensis Wu，Wu et Xie sp．nov．和暗色沙塘鳢0．obseura(Temm.et Schl.)