Mesophase structure-mechanical and ionic transport correlations in extended amphiphilic dendrons

We have studied the self-assembly of amphiphilic dendrons extended with linear polyethylene oxide (PEO) chains and their ion complexes. Keeping the dendron core and linear PEO chain compatible allows for the combination of dendritic core-shell and conventional blockcopolymer characteristics for complex mesophase behavior. An unexpected sequence of crystalline lamellar, cubic micellar (Pm3n), hexagonal columnar, continuous cubic (Ia3d), and lamellar mesophases is observed. Multiple phase behavior within single compounds allows for the study of charge transport and mechanical property correlations as a function of structure. The results suggest an advanced molecular design concept for the next generation of nanostructured materials in applications involving charge transport.     

N and P losses from a paddy field plot in central Korea

Abstract

The study was carried out to investigate the water balance and runoff and infiltration losses of nutrients in a paddy field plot located in southern Korea. Field monitoring was carried out during the cropping season from May 1, 1999 to September 30, 2000. The soil of the experimental paddy field belonged to the Jisan series (SiL; fine loam, mixed, mesic Fluventic Haplaquepts) covering on area of 5,000 m² (100 m × 50 m). The measured input quantities of N and P into the paddy field were as follows: 122 and 140 kg N ha^?1 and 29 and 30 kg P₂O₅ kg ha^?1 from chemical fertilizer, 20 and 28 kg N ha^?1 and 0.35 and 0.36 kg P ha^?1 from precipitation, and 26 and 35 kg N ha^?1 and 0.57 and 0.72 kg P ha^?1 from irrigation water, respectively. The measured outputs of N and P during the study period were as follows: 48 and 52 kg N ha^?1 and 1.1 and 1.6 kg P ha^?1 from runoff water, and 9 and 12 kg N ha^?1 and 0.04 and 0.05 kg P ha^?1 from infiltration. The runoff loading was the highest in June, presumably because of the higher concentrations of chemical components associated with chemical fertilizer application. The runoff losses of nutrients were compared to the amounts of nutrients supplied by chemical fertilizers. It was found that the losses of N accounted for 34.3 and 42.6% of the chemical fertilizer applied, while those of P accounted for 3.8 and 5.3%. The ratio between nutrient losses by infiltration and the chemical fertilizer applied was 6.4 and 9.8% for N and 0.1 and 0.2% for P, respectively.     

“云粳17号/云粳20号”RILs在高原与平原生境下主要农艺性状比较

利用已构建的“云粳17号/云粳20号”重组自交系(RILs)群体为试验材料,在低纬高原中国云南和高纬平原韩国水原两地间开展了粳稻主要农艺性状的异地穿梭鉴定,并分析了粳稻RILs群体主要农艺性状在不同生长环境下表型差异及其相关性.研究表明,千粒重在两地间表型差异不显著(t值为3.24),单株穗重和结实率表型差异相对较小(t值分别为8.00和8.31),而株高、穗数、每穗总粒数表型差异极显著(t值分别为13.17、15.11和13.56);主要农艺性状间相关性分析表明,两种生境下除结实率与单株稳重相关性不一致外,其它性状间的相关性表现趋势较一致;两地熟期也较一致.以上说明可以利用高原和平原两大生境,加强对品种适应性的选择,促进有利基因的鉴定,为两国开展优异性状的QTL定位和品种选育提供理论依据.     

The mechanical properties of polyurethane foam wound dressing hybridized with alginate hydrogel and jute fiber

The purpose of this study is to fabricate a smart wound dressing by hybridizing hydrophilic polyurethane foam (PUF) and alginate hydrogel. Hydrophilic PUF is used to maintain damaged tissue in a moist environment. Despite its many strong points as a wound dressing, hydrophilic PUF cannot be loaded with ingredients such as growth factors and cytokines that would enhance wound healing. Therefore, we introduce a pH-sensitive alginate hydrogel with the ability to selectively release drugs within the pH range of wounded skin. Due to the small pore size of PUF and the high viscosity of the alginate solution, the two are not easily penetrable. As such, a vacuum method is used to insert alginate hydrogel into the PUF. The optimum conditions for the vacuum method chosen are to be proposed. However, the mechanical strength of PUF decreased after containing alginate hydrogel. Therefore, Na-alginate powder for PUF, various types of crosslinking agents and jute fiber for alginate hydrogel were introduced to improve the mechanical properties of hydrogel/PUF hybrid wound dressing. Three different types of crosslinking agents are used for the gel formation. The most suitable crosslinking agent and its concentration for alginate hydrogel is also determined by the experiments. The experimental results are discussed with proper schemes and reasonable explanations.     

Polyester-based thermoplastic elastomer/MWNT composites: Rheological, thermal, and electrical properties

Polyester-based thermoplastic elastomer (Hytrel®) was melt-compounded with multi-walled nanotubes (MWNTs) using an internal mixer and the changes in the thermal, electrical and rheological properties were investigated using a range of nanotube contents (from 0.1 to 7 wt%). Even at nanotube concentrations as low as 0.1 wt%, the crystallization temperature was remarkably elevated by 15 °C and it increased further up to 22 °C with a 5 wt% loading. On the contrary, the melting temperature increased by 2 °C with 0.1 wt% MWNTs and it was slightly decreased by further additions of MWNTs. Electrical conductivity measured by the four probe method was detected from the 1 wt% MWNTs, indicative of electrical percolation. In addition, MWNTs starting from 4 wt% and above had no significant effect on the electrical conductivity, while it rapidly increased with nanotube contents below 4 wt%. Dynamic rheological properties were measured using a strain controlled rotational rheometer. The complex viscosity increased with MWNT contents giving an abrupt increase between 0.5 and 1 wt% loadings. In addition, the storage and loss modulus increased in a different manner depending on the range of the nanotube concentration. In the Cole-Cole plot, the slope of the nanocomposites decreased from 1.63 to 0.74 with increasing nanotube contents. In the Casson plot, the addition of MWNTs up to 0.5 wt% did not show any yield behavior giving an extremely low value for the yield stress, but further additions of nanotubes increased it notably. The presence of nanotubes in the elastomer increased the relaxation time with nanotube contents and their effect became weak as the frequency increased.     

Fabrication and surface modification of melt-electrospun poly(D,L-lactic-co-glycolic acid) microfibers

In this study, biodegradable poly(D,L-lactic-co-glycolic acid) (PLGA) fibers were prepared by a melt-electrospinning and treated with plasma in the presence of either oxygen or ammonia gas to modify the surface of the fibers. The effects of processing parameters on the melt-electrospinning of PLGA were examined in terms of fiber morphology and diameter. Among the processing parameters, the spinning temperature and mass flow rate had a significant effect on the average fiber diameter and its distribution. The water contact angle of melt-electrospun PLGA fibers decreased significantly from 123 ° to 55 ° (oxygen plasma treatment) or to 0 ° (ammonia plasma treatment) by plasma treatment for 180 sec, while their water content increased significantly from 2.4 % to 123 % (oxygen plasma treatment) or to 189 % (ammonia plasma treatment). Ammonia gas-plasma enhanced the surface hydrophilicity of PLGA fibers more effectively compared to oxygen gas-plasma. X-ray photoelectron spectroscopy analysis supported that the number of polar groups, such as hydroxyl and amino groups, on the surface of PLGA fibers increased after plasma treatment. Overall, the microfibrous PLGA scaffolds with appropriate surface hydrophilicity and fiber diameter could be fabricated by melt electrospinning and subsequent plasma treatment, without a significant deterioration of fiber structure and dimensional stability. This approach of controlling the surface properties and structures of fibers could be useful in the design and tailoring of novel scaffolds for tissue engineering.