Use of culture-derived Fusarium oxysporum f. sp. cubense, race 1 filtrates for rapid and non-destructive in vitro differentiation between resistant and susceptible clones of field-grown banana

Banana and plantain are among the most important food crops in developing countries but production is threatened by increasing virulent forms of Fusarium oxysporum f. sp. cubense. Chemical control is not economically effective and,therefore, breeding programs are necessary. Traditional field studies of new genotype resistance to this disease are time-consuming and destructive. Therefore,we developed a rapid and non-destructive procedure to differentiate field-grown banana resistant from susceptible clones. This procedure implicates application of culture filtrates of Fusarium oxysporum f. sp. cubense race 1 onto banana leaves. The relationship between duration of the fungal in vitro incubation, and the fungal culture fresh mass, the culture filtrate absorbency, and the Gross Michel (susceptible cultivar)leaf lesion area (after application of the culture filtrate) were similar and at 24day-incubation the highest values of the recorded indicators were observed. A comparison between Gross Michel and FHIA-01(resistant) was also performed. The most relevant differences between cultivars were observed at 48 hours after application of the culture filtrate, and in the middle-aged leaves. The position of the culture filtrate application in the leaf limb (distal, middle, proximal) was not determinant. A wider comparison among banana cultivars confirmed previous results informed by other researchers using different systems to study this plant-fungus interaction. Such a confirmation validates the effectiveness of the procedure described here to select rapid and non-destructively banana resistance to this disease at field level. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kinetics and mechanism of acetic acid pulping of detannined Pinus pinaster bark

Summary The observed kinetics of Pinus pinaster bark with acetic acid after alkali treatment, with or without intervening acid prehydrolysis, are satisfactorily explained by a model involving both solubilization and condensation reactions.This study was subsidised by the Xunta de Galicia. J. González is grateful to DGICYT for a research grant     

Interaction of arbuscular mycorrhizal fungi and rhizobia: Effects on flax yield in spoil‐bank clay

This study focused on the application of native strains of arbuscular mycorrhizal fungi (AMF) and Sinorhizobium in effective crop production during reclamation of coal‐mine spoil banks. Two greenhouse experiments were conducted in spoil‐bank clay with a low dose of organic amendment to determine whether the microbial inoculation improves growth and utility qualities of two cultivars of Linum usitatissimum L. (oil and fiber flax). Inoculation with two native AMF isolates (Glomus mosseae, G. intraradices, and their mixture) significantly increased growth and shoot phosphorus (P) concentration of both flax cultivars. Inoculated fiber flax plants produced fivefold more fibers than the uninoculated ones. In oil flax, mycorrhizal inoculation significantly but quantitatively to a minor degree decreased the concentration of nonsaturated fatty acids in the seed oil. A mixture of five native Sinorhizobium sp. strains supported growth and P uptake of oil flax only in the absence of AMF. However, these beneficial effects of the bacteria were significantly lower as compared to AMF. No synergic action of Sinorhizobium strains and AMF was observed, and their interactions were often even antagonistic. Inoculation with AMF significantly decreased population density of Sinorhizobium in the soil. These results suggest that a careful selection of suitable bacterial strains is necessary to provide effective AMF combinations and maximize flax‐growth support.     

Nonlinear models for repeated measurement data: An overview and update

Nonlinear mixed effects models for data in the form of continuous, repeated measurements on each of a number of individuals, also known as hierarchical nonlinear models, are a popular platform for analysis when interest focuses on individual-specific characteristics. This framework first enjoyed widespread attention within the statistical research community in the late 1980s, and the 1990s saw vigorous development of new methodological and computational techniques for these models, the emergence of general-purpose software, and broad application of the models in numerous substantive fields. This article presentsan overview of the formulation, interpretation, and implementation of nonlinear mixed effects models and surveys recent advances and applications.     

A Conus regularis Conotoxin with a Novel Eight-Cysteine Framework Inhibits CaV2.2 Channels and Displays an Anti-Nociceptive Activity

A novel peptide, RsXXIVA, was isolated from the venom duct of Conus regularis, a worm-hunting species collected in the Sea of Cortez, México. Its primary structure was determined by mass spectrometry and confirmed by automated Edman degradation. This conotoxin contains 40 amino acids and exhibits a novel arrangement of eight cysteine residues (C-C-C-C-CC-CC). Surprisingly, two loops of the novel peptide are highly identical to the amino acids sequence of ω-MVIIA. The total length and disulfide pairing of both peptides are quite different, although the two most important residues for the described function of ω-MVIIA (Lys2 and Tyr13) are also present in the peptide reported here. Electrophysiological analysis using superior cervical ganglion (SCG) neurons indicates that RsXXIVA inhibits Ca_V2.2 channel current in a dose-dependent manner with an EC₅₀ of 2.8 μM, whose effect is partially reversed after washing. Furthermore, RsXXIVA was tested in hot-plate assays to measure the potential anti-nociceptive effect to an acute thermal stimulus, showing an analgesic effect in acute thermal pain at 30 and 45 min post-injection. Also, the toxin shows an anti-nociceptive effect in a formalin chronic pain test. However, the low affinity for Ca_V2.2 suggests that the primary target of the peptide could be different from that of ω-MVIIA.     

Direct analysis of pesticide residues in olive oil by on-line reversed phase liquid chromatography-gas chromatography using an automated through oven transfer adsorption desorption (TOTAD) interface

A fully automated on-line reversed phase liquid chromatography-gas chromatography system is described. The system uses a prototype of the automated through oven transfer adsorption desorption interface. The system is demonstrated by presenting a new rapid method for the determination of pesticide residue in olive oil, which is injected directly with no sample pretreatment step other than filtration. Methanol:water is used as the eluent in the LC preseparation step, while the LC fraction containing the pesticide is automatically transferred to the gas chromatograph. Detection limits of pesticides varied from 0.18 to 0.44 mg/L when a flame ionization detector was used. As an example, relative standard deviation and linear calibration are presented for terbutryne.     

Increase of Russian wheat aphid, Diuraphis noxia (Kurdj.) in hot and dry weather (2000) (Hom., Aphididae)

Two hot and dry weather periods during mid-spring and early summer caused severe drought-stress to barley groves in many districts of the Czech Republic in 2000. Although not generally taken into consideration as an injury-increasing factor, the Russian wheat aphid (=RWA), Diuraphis noxia (Kurdj.), was discovered to contribute significantly to injury in the ripening stage of spring barley as well as to the substantial decrease of yield (up to 30–40% of the calculated mean, in some districts). RWA increased considerably not only in the lowland banker areas but also in the higher altitudes, values in the latter case then manifesting those found in the lowland banker areas in the previous years.     

Agreement between direct, oscillometric and Doppler ultrasound blood pressures using three different cuff positions in anesthetized dogs

ObjectiveTo evaluate the agreement between invasive blood pressure (IBP) and Doppler ultrasound blood pressure (DUBP) using three cuff positions and oscillometric blood pressure (OBP) in anesthetized dogs.Study designProspective study.AnimalsNine adult dogs weighing 14.5–29.5 kg.MethodsThe cuff was placed above and below the tarsus, and above the carpus with the DUBP and above the carpus with the OBP monitor. Based on IBP recorded via a dorsal pedal artery catheter, conditions of low, normal, and high systolic arterial pressures [SAP (mmHg) <90, between 90 and 140, and >140, respectively] were induced by changes in isoflurane concentrations and/or dopamine administration. Mean biases ± 2 SD (limits of agreement) were determined.ResultsAt high blood pressures, regardless of cuff position, SAP determinations with the DUBP underestimated invasive SAP values by more than 20 mmHg in most instances. With the DUBP, cuff placement above the tarsus yielded better agreement with invasive SAP during low blood pressures (0.2 ± 16 mmHg). The OBP underestimated SAP during high blood pressures (?42 ± 42 mmHg) and yielded better agreement with IBP for mean (MAP) and diastolic (DAP) arterial pressure measurements [overall bias: 2 ± 15 mmHg (MAP) and 0.2 ± 16 mmHg (DAP)].ConclusionsAgreement of SAP determinations with the DUBP is poor at SAP > 140 mmHg, regardless of cuff placement. Measurement error of the DUBP with the cuff placed above the tarsus is clinically acceptable during low blood pressures. Agreement of MAP and DAP measurements with this OBP monitor compared with IBP was clinically acceptable over a wide pressure range.Clinical relevanceWith the DUBP device, placing the cuff above the tarsus allows reasonable agreement with IBP obtained via dorsal pedal artery catheterization. Only MAP and DAP provide reasonable estimates of direct blood pressure with the OBP monitor evaluated.     

Thinning increases cone production of stone pine (Pinus pinea L.) stands in the Northern Plateau (Spain)

Context

Edible stone pine (Pinus pinea L.) nut is a forest product which provides the highest incomes to the owners of stone pine forests.

Aim

The objective of this work is to evaluate the effect of first thinning on growth and cone production in an artificially regenerated stand in order to determine optimum intensity.

Methods

A thinning trial was installed in 2004 to compare two thinning regimes (heavy and moderate) and a control treatment. From 2004 to 2012, six inventories of forest attributes were carried out, and the cone crop was harvested annually. We evaluated the effect of thinnings on growth using repeated measures analysis of variance with a mixed model approach. With regards to cone production, we first estimated the probability of finding cones in a tree by applying a generalized mixed model and then estimated cone production by using a mixed model, including climatic variables.

Results

We found that thinning had a positive influence on tree diameter increment. Thinning increased the probability of finding cones and cone production. However, significant differences between heavy and moderate thinnings were not found.

Conclusion

We recommend early silvicultural treatments in stone pine stands to favor the development of trees and larger edible pine nut production.