Impregnation of Norway spruce (Picea abies L. Karst.) wood by hydrophobic oil and dispersion patterns in different tissues

Wood from Norway spruce (Picea abies L. Karst.) is biologicallydegraded in exposed conditions. It also has anatomical featuresthat make it difficult to impregnate with preservatives by currentlyavailable industrial processes. In the study reported here,we used the new Linotech process to impregnate Norway sprucewood with hydrophobic linseed oil and then quantified its uptakeand dispersal in anatomically distinct wood tissues. We alsoinvestigated the effects of the wood moisture content on theresults of the impregnation. Samples (500 x 25 x 25 mm) weretaken from 15 trees in a coniferous forest in northern Sweden(64° 10' N, 160–320 m a.s.l.). The parameters forthe Linotech process were 2–3 h treatment time at 0.8–1.4MPa and 60–140°C. To determine the level of uptake,the linseed oil was extracted from the impregnated wood usingmethyl-tertiary-butyl-ether. The uptake was quantitatively analysedby comparing X-ray microdensitometry values obtained followingimpregnation both before and after oil removal. In earlywood,initial moisture content had an obvious effect on the impregnationresult. Six times more oil was taken up when the moisture contentwas greater than ~150 per cent than when it was less than 30per cent. Theoretical calculations, based on density levels,suggest that the water-filled porosity of the wood (water volumedivided by porosity volume) was positively correlated with thelinseed oil uptake, and more strongly correlated in earlywoodthan in latewood. There were also significant differences inuptake between different wood tissues; heartwood/mature woodand heartwood/juvenile wood showed 10–20 per cent weightincreases due to linseed oil uptake, compared with 30–50per cent in sapwood/mature wood. Examination by scanning electronmicroscopy confirmed these uptake patterns. The moisture contentafter impregnation was about 5 per cent, irrespective of theLinotech process parameters, tissue type and initial moisturecontent. In conclusion, the impregnation process used here resultsin high levels of well-dispersed linseed oil uptake and shouldfacilitate drying.     

Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression

This work was undertaken to investigate the feasibility of using near infrared spectroscopy (NIR) and partial least squares regression (PLS) as a tool to characterize the basic wood properties of Norway Spruce (Picea abies (L.) Karst.). The wood samples originated from a trial located in the province of Västerbotten in Sweden. In this trial, the effects of birch shelterwoods (Betula pendula Roth) of different densities on growth and yield in Norway spruce understorey were examined. All Norway spruce trees in each shelterwood treatment were divided into three growth rate classes based on diameter at breast height (1.3?m) over bark. Five discs were cut from each tree (i.e. from the root stem, and at 20%, 40%, 60%, and 80% of the total height). The discs from 40% tree height were used (i.e., where the largest variations in annual ring widths and wood density were found). A total of 27 discs were selected. The discs were used for measuring annual ring widths, wood density, average fiber length and the fiber length distributions. Milled wood samples prepared from the discs were used for recording NIR spectra. PLS regression was used to generate prediction models for the wood properties (Y-matrix) and NIR spectra (X-matrix) as well as between the wood properties (Y-matrix) and the fiber length distributions (X-matrix). One set of models was generated using untreated spectra and fiber length distributions. For a second set of models the structure in the X-matrix, which was orthogonal to the matrix described by the wood properties, was eliminated using a soft target rotation technique called orthogonal signal correction (OSC). The PLS model obtained using “raw” untreated NIR spectra and fiber length distributions had a poor modeling power as evidenced by the cumulative Q² values. For the PLS models based on untreated NIR spectra the cumulative Q² values ranged from a minimum of 16% (wood density) to a maximum of 46% (no. of annual rings). Orthogonal signal correction of the X-matrix (NIR spectra or fiber length distributions) gave PLS models with a modeling power corresponding to cumulative Q² values well in excess of 70%. The improvement in predictive ability accomplished by the OSC procedure was verified by placing four of the 27 observations in an external test set and comparing RMSEP values for the test set observations without OSC and with OSC.     

Effect of snow cover on the distribution of non-migratory sika deer on the top of Mt. Tanzawa,Japan

On the basis of 268 direct sika deer observations and 212 ratio locations of three individuals, the influence of snow on deer distribution was studied. During the period of snow absence or its shallow cover, the deer did not show any preferences towards slope aspect. However, when the snow coverage became deeper, the deer used westerly exposures (having shallower snow cover) more intensively. Later on, when the snow started to melt on the easterly slope aspects deer mostly used those exposures due to relatively abundant food resources.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Effects of different soil treatments on growth and net nitrogen uptake of newly planted Picea abies (L.) Karst. seedlings

Five soil treatments in a 4-year-old clearcut in southern Sweden affected biomass increase and net nitrogen uptake by planted Norway spruce (Picea abies (L.) Karst.) seedlings through their on net mineralisation and root growth. The patch soil treatments studied were: (i) soil inversion in an old clearcut; (ii) mineral soil from the clearcut remaining, (iii) mineral soil from the clearcut with fertiliser application during the first season; (iv) mineral soil from a nearby uncut forest replacing the clearcut mineral soil; and (v) an untreated control. Growth increased in seedlings in treatments (i) and (iii), but growth in soil treatments with humus removal was not better than that of seedlings in untreated soil. High N uptake early in the first growing season resulted in increased growth during this season in contrast to late N uptake that resulted in a high N concentration in the seedlings after the first growing season. This in turn led to a high growth rate during the next growing season. Generally, both root growth and net N mineralisation were positively correlated to N uptake in the soil treatments. Therefore, a combination of low net N mineralisation and poor root growth as a result of high soil density appears to explain the low N uptake in seedlings in undisturbed soil. The importance of competition with field vegetation for N and water was not clear. Net mineralisation was larger in soil treatments where the humus layer was retained than where it was removed. Net N mineralisation in soil from old clearcuts was the same as in soil from fresh clearcuts.     

HPLC analysis of rosmarinic acid in feed enriched with aerial parts of Prunella vulgaris and its metabolites in pig plasma using dual-channel coulometric detection

This paper describes a sensitive isocratic HPLC/ECD method developed for the determination of rosmarinic acid (RA) in plant material, animal feed, and pig plasma. The plasma sample preparation only includes protein precipitation and adjustment of the pH. The applicability of the method was tested on plasma samples of pigs that were exposed to a 91-day oral intake of RA via feed enriched by aerial parts of Prunella vulgaris. The plasma was directly analyzed using the method described as well as after enzymatic hydrolysis. When no hydrolysis step was included, RA and caffeic acid (CA) were quantified in the plasma. In hydrolyzed plasma samples, several other metabolites were determined, including dihydrocaffeic, ferulic, and dihydroferulic acid. The dual-channel coulometric detection employed, as an alternative to mass spectrometry, offers good selectivity and sensitivity owing to the electrochemical properties of the phenolic constituents.     

Effect of thinning on anatomical adaptations of Norway spruce needles

Conifers and other trees are constantly adapting to changes in light conditions, water/nutrient supply and temperatures by physiological and morphological modifications of their foliage. However, the relationship between physiological processes and anatomical characteristics of foliage has been little explored in trees. In this study we evaluated needle structure and function in Norway spruce families exposed to different light conditions and transpiration regimes. We compared needle characteristics of sun-exposed and shaded current-year needles in a control plot and a thinned plot with 50% reduction in stand density. Whole-tree transpiration rates remained similar across plots, but increased transpiration of lower branches after thinning implies that sun-exposed needles in the thinned plot were subjected to higher water stress than sun-exposed needles in the control plot. In general, morphological and anatomical needle parameters increased with increasing tree height and light intensity. Needle width, needle cross-section area, needle stele area and needle flatness (the ratio of needle thickness to needle width) differed most between the upper and lower canopy. The parameters that were most sensitive to the altered needle water status of the upper canopy after thinning were needle thickness, needle flatness and percentage of stele area in needle area. These results show that studies comparing needle structure or function between tree species should consider not only tree height and light gradients, but also needle water status. Unaccounted for differences in needle water status may have contributed to the variable relationship between needle structure and irradiance that has been observed among conifers.     

城市居民食物氮消费变化特征与趋势预测——以重庆市为例

城市作为全球氮热点区域,其中城市居民食物氮消费对全球氮循环的影响越来越显著,研究其变化特征及趋势,对推动城市低氮生活具有重要意义.以重庆市为例,分析1992年-2012年期间全市城市居民食物氮消费的动态变化,并结合灰色系统GM(1,1)模型,预测未来10年重庆市城市居民食物氮消费总量.研究结果表明:重庆市城市居民食物氮消费从1992年-2012年由22 130.348t增加到60 196.306t,各类食物氮消费结构中粮食消费呈不断下降趋势,蔬菜、乳制品、禽肉类的食物氮消费则呈现上升趋势.模型GM(1,1)预测显示,重庆市城市居民氮消费2022年可能超过90 000t,将进一步威胁城市环境安全,并且人均可支配收入、人均GDP以及高等学历人数比重对其具有较显著的影响.     

Soil variability through spatial scales in a permanently disturbed natural spruce-fir-beech forest

Soil variability was assessed in a 74.2-ha area within the Žofínsky prales natural forest. Parameters evaluated for 1765 soil profiles inside 353 graticule plots were as follows: (1) thickness of organic horizons, (2) thickness and form of mineral horizons, (3) humus form (HF), (4) soil taxonomic unit (STU) and (5) anomalies. In addition, soil reaction (pH_KCl) and oxidizable carbon content (C_ox) were measured in the laboratory for 734 samples from the upper mineral (A) and lower mineral (B) horizons. The most frequently occurring humus form was mor followed by moder, hydromor and peaty T-horizon. Entic Podzols, Dystric Cambisols, Haplic Cambisols, Albic Podzols, Histic (or Haplic) Gleysols, Endogleyic Stagnosols, Fibric or Hemic or Sapric Histosols and Stagnic Gleysols were all present at the site despite its homogeneous geological bedrock. Overall coefficient of variance (CV) was lower in terrestrial soils compared with (semi-)hydromorphic soils. Overall variance decreased in both soil groups with increasing depth, as did CV differences between the fine (up to 10 m) and the locality scales. The lowest CV values occurred for C_ox and pH_KCl. The CV values differed between STUs as well. Compared to lower horizons, variograms of upper horizons showed greater autocorrelation at the intermediate spatial scale (10–320 m)—ranging from 50 to 150 m. Semivariance values, however, reached 70–80% of sill already at a distance of 10 m. The most significant factor of variability at all studied spatial scales is presumably the soil disturbance regime, followed by terrain micro-topography and the effect of tree species.