Risks to the aquatic ecosystem from the application of Metarhizium anisopliae for locust control in Australia

Laboratory tests of Metarhizium anisopliae var acridum Driver & Milner, at a dose of 1.3 x 10(6) conidia ml-1, had no adverse effects on nymphs of mayfly, Ulmerophlebia sp or 8-week-old fry of the rainbow fish, Melanotaenia duboulayi Castelnau. This dose was toxic to the cladoceran, Ceriodaphnia dubia Richard, causing 100% mortality in 48 h. When this test was repeated at doses of up to 6.7 x 10(3) conidia ml-1, there was only 5% mortality after 192 h. Spraying of artificial water sources with a very high dose of the fungus as an aqueous spray resulted in 80-130 conidia ml-1 at 15 cm depth in the first 24 h after spraying. The conidia rapidly settled out and were absent from the top 15 cm layer of water after about 50 h. A similar experiment using the oil formulation as used in field control resulted in a 2- to 20-fold lower level of conidia in the water. Finally, sampling actual water sources in spray areas revealed a very low level of contamination of the water, with a maximum mean level of 29 conidia ml-1 in the first 24 h after treatment. Thus the level of conidia likely to enter water during control campaigns is a small fraction of that required to kill cladocerans, the only sensitive non-target organism tested. It is concluded that the biopesticide is very unlikely to pose any hazard to aquatic organisms.     

Soybean mosaic virus Helper Component-Protease Alters Leaf Morphology and Reduces Seed Production in Transgenic Soybean Plants

ABSTRACT Transgenic soybean (Glycine max) plants expressing Soybean mosaic virus (SMV) helper component-protease (HC-Pro) showed altered vegetative and reproductive phenotypes and responses to SMV infection. When inoculated with SMV, transgenic plants expressing the lowest level of HC-Pro mRNA and those transformed with the vector alone initially showed mild SMV symptoms. Plants that accumulated the highest level of SMV HC-Pro mRNA showed very severe SMV symptoms initially, but after 2 weeks symptoms disappeared, and SMV titers were greatly reduced. Analysis of SMV RNA abundance over time with region-specific probes showed that the HC-Pro region of the SMV genome was degraded before the coat protein region. Transgenic soybean plants that expressed SMV HC-Pro showed dose-dependent alterations in unifoliate leaf morphologies and seed production where plants expressing the highest levels of HC-Pro had the most deformed leaves and the lowest seed production. Accumulation of microRNAs (miRNAs) and mRNAs putatively targeted by miRNAs was analyzed in leaves and flowers of healthy, HC-Pro-transgenic, and SMV-infected plants. Neither expression of SMV HC-Pro nor SMV infection produced greater than twofold changes in accumulation of six miRNAs. In contrast, SMV infection was associated with twofold or greater increases in the accumulation of four of seven miRNA-targeted mRNAs tested.     

Adsorption of metal and uranyl ions onto amidoximated Pinus densiflora bark

Pine (Pinus densiflora) bark was chemically modified by grafting with acrylonitrile (AN) through Fenton reaction and conversion of the cyano group to an amidoxime group by reaction with hydroxylamine. Treatments of pine bark with 160 mM H₂O₂ at 40°C yielded ~70% grafting in 6-h reaction. After alkali hydrolysis of amidoximated pine bark (AOPB), its adsorption capacity (q _e) for copper ions was largely increased from 0.5 to 1.8 mmol/g. Adsorption of the hydrolyzed AOPB (HAOPB) followed the pseudo-second-order kinetic model. Among the metal ions tested, the order of adsorption capacity (q _e) predicted by the kinetic model at equilibrium time was Hg²⁺ > UO₂ ²⁺ > Cd²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption process was pH-dependent, and the adsorption equilibrium was observed in the pH range of 6–7 for all the metal ions. Even though pine bark is a good adsorbent for Hg²⁺ and UO₂ ²⁺ ions, it had a poor affinity for the other ions tested. It was obviously found that HAOPB had very high adsorption abilities for heavy metal and uranyl ions.     

Proximate and mineral components of Viscum album var. coloratum grown on eight different host tree species

Mistletoes are parasite plants growing on various tree species,taking nutrients from the host.Beneficial compounds of mistletoe were used in medicine and these mistletoes were commonly collected from oak species that were not well identified.We analyzed the nutritional value by measuring proximate and mineral components of Korean mistletoe(Viscum album var.coloratum)from various host trees.Carbohydrate was the most proximate component in both leaves and twigs followed crude protein,crude fiber,crude ash and crude fat.While the contents of the proximate components and minerals varied among hosts and between plant parts,leaves contained higher crude protein and ash,and more minerals except for magnesium than twigs,although no significant difference was found inmistletoe grown on Prunus mandshurica.There were significant differences of proximate and mineral contents depending on the host species.Mistletoe grown on Chaenomeles sinensis contained higher levels of carbohydrates,crude fat,crude ash,magnesium,calcium,sodium,iron,and zinc than mistletoe grown on other species.Mistletoe grown on P.mandshurica contained high mineral levels of potassium,copper and phosphorous.The nutritional value of mistletoes were greatly influenced by the host species but among the hosts,specific nutrients accumulated in leaves more than in twigs,and vice versa.Based on the analysis,Korean mistletoe contains relatively good quality of nutrients and has high potential for dietary supplements as well as for medicinal compounds.     

Prediction of internal bond strength in a medium density fiberboard process using multivariate statistical methods and variable selection

This paper presents new data mining-based multivariate calibration models for predicting internal bond strength from medium density fiberboard (MDF) process variables. It utilizes genetic algorithms (GA) based variable selection combined with several calibration methods. By adopting a proper variable selection scheme, the prediction performance can be improved because of the exclusion of non-informative variable(s). A case study using real plant data showed that the calibration models based on the process variables selected by GA produced better performance than those without variable selection, with the exception of the radial basis function (RBF) neural networks model. In particular, the calibration model based on supervised probabilistic principal component analysis (SPPCA) yielded better performance (only when using GA) than partial least squares (PLS), orthogonal-PLS (O-PLS), and radial basis function neural networks models. The SPPCA model benefits most from the use of GA-based variable selection in this case study. N. André and H.-W. Cho equally contributed to this work.     

Study on half-scale model test for light-frame shear wall

A half-scale model of a light-frame shear wall was developed to evaluate the racking performance of a fullscale shear wall (prototype). The effect of nail size on the performance of the shear wall was also investigated using models constructed with three types of nail. Materials for the model were determined through experimental methods, which included nail-head push-through, stud-to-sheathing nail connection, and static bending tests. Materials with which the model was made to be in similarity to the prototype were three-layer 4.8-mm plywood, 39.72-mm long nails, and 1 × 2 lumber cut from 2 × 4 studs. In accordance with ASTM E 72 and ASTM E 564, racking resistance tests were conducted on 20 shear walls. The results showed that the maximum load capacities of the prototype walls could be evaluated by the model without significantly different failure modes. Tests on the effect of nail size revealed that increasing the nail head diameter may improve the performance of shear walls.Parts of this paper were presented at the International Conference on Effective Utilization of Plantation Timber (ICEUPT'99), Chi-Tou, Taiwan, May 1999; and the World Conference on Timber Engineering (WCTE2000), Whistler, Canada, July–August 2000     

Tapered conduits can buffer hydraulic conductance from path-length effects

The model of West, Brown and Enquist showed that total hydraulic resistance in trees can be independent of path length, provided that vascular conduits taper sufficiently. This model assumes that the tree branch network is volume-filling, so that segment lengths increase exponentially from tree top to base. We show that partial buffering of hydraulic resistance from path-length effects can occur even for moderate tapering, and that this effect is stronger when segment lengths are fixed. Still needed are measurements of tracheary size and hydraulic resistance designed to test this model, which shows how hydraulic limitation of tree height growth may be mitigated.