Age and growth of alfonsino Beryx splendens from the Kanto District, central Japan, based on growth increments on otoliths

ABSTRACT:   Age and growth of alfonsino Beryx splendens (Lowe) were studied using counts of presumed daily incremental growth rings on the transverse section of otoliths of fish collected from the Kanto District, central Japan. Microstructural growth increments were observed from the core to the outermost margin of the broadest of approximately 50 branches formed on the surface of an otolith. Of 98 otoliths examined, 46 were readable. The number of increments and fish lengths ranged from 448 (218 mm fork length [FL]) to 3701 (411 mm FL). The ages of these fish were estimated to be 1 year, 2 months and 10 years, 2 months, respectively, assuming that an increment was formed daily. The von Bertalanffy growth equation combined for males and females was expressed as follows: L _t  = 542 {1 −  exp  [−0.133( t  + 2.00)]}, where L _t is fork length (mm) at yearly age t . The results of the present study were compared with those of other researchers who had studied alfonsino from central Japan.     

Antigens and antibodies in the ascitic fluid of mice infected with Fasciola gigantica

Fluke antigens were detected in the ascitic fluid of mice infected with Fasciola gigantica. The precipitating antibodies reactive against the antigens from metacercariae were detected as early as 2 weeks after the infection, and those against the adult and immature worms appeared 3 and 4 weeks later.     

Biosynthesis of a syringyl 8-O-4′ neolignan in Eucommia ulmoides: formation of syringylglycerol-8-O-4′-(sinapyl alcohol) ether from sinapyl alcohol

To investigate the biosynthesis and stereochemistry of syringylglycerol-8-O-4′-(sinapyl alcohol) ether (SGSE), a syringyl 8-O-4′ neolignan, feeding experiments and enzyme assays using Eucommia ulmoides were carried out. Diastereoselective formation of erythro-SGSE was found. When [8-¹⁴C]sinapyl alcohol was administered to excised shoots of E. ulmoides, ¹⁴C was incorporated into free SGSE and SGSE glucosides. In stems, incorporation into (+)-erythro-[¹⁴C]SGSE (0.037%) with 9.1% enantiomeric excess (% e.e.) was found; incorporation into the threo isomer was not detectable. Erythro-[¹⁴C]SGSE glucosides (0.047%) dominated over threo forms (0.007%) with 74.0% diastereomeric excess (% d.e.); both diastereomers were levorotatory with 32.0% e.e. and 18.3% e.e., respectively. In leaves, higher incorporation into (−)-erythro-[¹⁴C]SGSE (0.500%, 15.9% e.e.) than into the threo isomer (0.206%, 7.4% e.e.) was observed (41.6% d.e.). (−)-Erythro-[¹⁴C]SGSE glucosides (1.692%, 25.0% e.e.) were produced at higher rates than threo isomers (0.177%, 16.4% e.e.) with 81.0% d.e. In incubations of a mixture of [8-¹⁴C]sinapyl and [8-¹⁴C]coniferyl alcohols with an insoluble enzyme preparation from stems of E. ulmoides, erythro-SGSE was preferentially produced. The highest % d.e. (82.8) was observed at 60 min with the (+)-erythro isomer (21.4% e.e.) and the (−)-threo form (4.3% e.e.).Part of this report was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002, and the 47th Lignin Symposium, Fukuoka, October 2002     

Assessing raindrop impact energy at the forest floor in a mature Japanese cypress plantation using continuous raindrop-sizing instruments

The raindrop size distribution of throughfall and open rainfall was monitored continuously during a rainfall event using laser raindrop-sizing instruments (LD gauges), in order to calculate the raindrop impact energy in a plantation of mature Japanese cypress (Chamaecyparis obtusa), where surface erosion at the forest floor had been a problem. Data from two rainfall events were analyzed. The LD gauges recorded qualitative raindrop size distribution, and the capture rate during each rainfall event was used to manipulate raindrop data quantitatively. Throughfall and open rainfall comparisons revealed several important differences. First, throughfall raindrops were fewer in number and larger in size than open rainfall drops. In one rainfall event, for example, throughfall raindrops were less than one-fifth as frequent as open rainfall raindrops; in addition, the maximum throughfall raindrop diameter was 6.35mm compared to 3.31mm for open rainfall raindrops. Second, throughfall raindrops that were larger than the largest open rainfall raindrops comprised 63.8% of the throughfall precipitation by volume. Third, total raindrop impact energy from throughfall was over twice that of open rainfall. Moreover, comparison of throughfall events implied that throughfall raindrops did not always have a uniform distribution between different events or among different periods of time in one rainfall event, in contrast to findings in previous studies which showed that throughfall raindrops had a uniform size distribution independent of rainfall intensity. It is possible that an abrupt transition of throughfall intensity from low to high changes the distribution of throughfall raindrops.     

Relationship between fracture toughness and acoustic emission during cleavage failure in adhesive joints

Summary Fracture toughness in mode I was determined for wood bonded with various adhesive systems. Tapered double-cantilever beam (TDCB) specimens were used, with attached transducer connected to instrumentation for monitoring acoustic emission. Adhesives used fro bonding the TDCB specimens included urea-formaldehyde resin, phenol-resorcinol resin, and emulsion polymer isocyanate, among others. Test parameters measured included critical load for cleavage fracture and number of events (stress waves) emitted, from which fracture toughness and cumulative count of acoustic emission were computed. It was found that there was a well defined, linear relation between fracture toughness and cumulative counts of acoustic emission per fracture area. The fracture toughness values of systems containing polyvinyl acetate and of epoxy resin were larger than those of thermosetting resins such as urea-or phenol formaldehyde. The high fracture toughness imparted by polyvinyl acetate was attributed to viscous movement of linear molecular chain segments, as compared with the more brittle behavior of the crosslinked molecular structure of such resins as ureaformaldehyde.     

Stereochemistry and biosynthesis of 8-O-4′ neolignans in Eucommia ulmoides: diastereoselective formation of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether

Stereochemistry and biosynthesis of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether (GGSE), an 8-O-4′ neolignan, which consists of coniferyl and sinapyl alcohol moieties, in Eucommia ulmoides were investigated. Four 8-O-4′ neolignans, GGSE, syringylglycerol-8-O-4′-(coniferyl alcohol) ether (SGCE), guaiacylglycerol-8-O-4′-(coniferyl alcohol) ether (GGCE), and syringylglycerol-8-O-4′-(sinapyl alcohol) ether (SGSE), were synthesized. Their erythro and threo diastereomers were separated through acetonide derivatives, intermediates of the synthesis, and identified by means of nuclear magnetic resonance (NMR) spectroscopy. All of the erythro-acetonide derivatives have larger coupling constants (ca 9 Hz) for the C₇-H resonances than those of the threo ones (1.5–2 Hz). In the case of the four 8-O-4′ neolignans, the C₇-H coupling constants of the threo-isomers are not smaller than those of the erythro ones. GGSE isolated previously from this plant was identified as the erythro isomer by comparison of the ¹³C-NMR data with synthetic erythro-GGSE and threo-GGSE and the other 8-O-4′ neolignans mentioned as above. Administration of a mixture of [8-¹⁴C]coniferyl alcohol and [8-¹⁴C]sinapyl alcohol to excised shoots of E. ulmoides was carried out and the incorporation of ¹⁴C into erythro-[¹⁴C]GGSE was found to be higher than that in threo-[¹⁴C]GGSE. The occurrence of diastereoselective formation of erythro-GGSE by cross coupling of coniferyl and sinapyl alcohols is suggested.Part of this paper was presented at the 47th Lignin Symposium, Fukuoka, October 2002 and the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, April 2003     

Effect of particle shape on linear expansion of particleboard

Hinoki (Japanese cypress) strand with 0.6mm thickness was hammer-milled to prepare three types of particles that had the same thickness but different lengths and widths. Screen analysis and image analysis were conducted to evaluate the shape and distribution of the particle dimensions. Laboratory-scale particleboards were fabricated at three density levels using these particles. To determine the true effect of particle shape on the linear expansion (LE) of the board, these boards exhibited almost the same temperature behavior during pressing, the same density profile, and the same bending properties at each board density level. LE at 40°C and 90% relative humidity of the board was found to be affected by the particle shape. The board composed of small particles showed a larger LE at the same density level. It was considered that the out-of-plane orientation angle of the particles affected the LE of the boards. Thickness swelling and internal bond strength were also affected by the particle shape.Part of this report was presented at the 50th annual meeting of the Japan Wood Research Society, Kyoto, April 2000     

Lignan production inDaphne odora cell cultures

Lignan production in callus and cell suspension cultures ofDaphne odora is reported for the first time. The cell suspension culture produced pinoresinol, lariciresinol, secoisolariciresinol, matairesinol, and wikstromol. The production of matairesinol in the cell suspension culture was much higher than that inDaphne odora stem tissues.Part of this report was presented at the 51th annual meeting of the Japan Wood Research Society, Tokyo, April 2001     

New lignan, isoactifolin, fromChamaecyparis obtusa cv. Breviramea

A new lignan isoactifolin was isolated from young shoots (with leaves) ofChamaecyparis obtusa cv. Breviramea. The structure of the compound was determined based on spectroscopic evidence.Parts of this report were presented at the 44th lignin symposium, Gifu, October 1999