刚果12号桉W5无性系与尾叶桉U6无性系胶合板材立木

利用雷州林业局刚果12号桉W5无性系林分中胸径8～18 cm径阶，树高11～23 m的样木1 207株和尾叶桉U6无性系林分中胸径8～18 cm径阶，树高10～21 m的样木784株，按材种规格标准造材实测材积，且分别建立刚果12号桉W5无性系和尾叶桉U6无性系胶合板材立木出材量二元回归方程，经检验精度可靠，可供参考使用。     

Early growth analysis and evaluation of 21 Eucalyptus clones in Leizhou Peninsula

The growth, morphology, and wind resistance of 21 Eucalyptus clones were investigated and analyzed in Leizhou Peninsula, Zhanjiang city. The results showed that coefficient of variation of each index phenotype varied from 15.21%-42.46%. There were significant differences among the clones in growth indexes. The top five clones with high individual volume were JJ144, 2#, 28#, 9#, and JJ197. The morphological indexes were significantly different among the clones. There were also significant differences among the clones in wind resistance index, and the clones with good wind resistance were 28#, JJ162, JJ195 and JJ215, their preservation rate were more than 80%. It was found that tree height and DBH significantly correlated to individual volume, and stem form was significantly related to branch. Using the principal component analysis, it was determined that JJ144, 2#, 28#, 9# and JJ162 were the excellent clones with good performance in the Leizhou area.     

基于CFD软件的轴流式风力灭火机叶轮性能模拟研究

利用CFD软件对轴流式风力灭火机叶轮的内部流场进行数值模拟,与风机试验台的试验数值对比,验证了数值模拟分析的正确性,得到了风机内部流场情况.通过对内部流场分析,为叶轮的结构优化提供了重要的理论依据,并对扭角和安装角调整改进,使设计方案最佳.     

广东潮州凤凰山次生林物种多样性及群落优势种的研究

应用样方调查法,研究分析了广东潮安凤凰山省级自然保护区内2片保护状态较好的次生林群落的植物组成和物种多样性特点.在两个面积为1200 m2的调查样方内,共记录了112种维管植物,隶属于48科77属.次生林优势科为茜草科、山茶科和樟科.乔木层优势种为阿丁枫(Altingia chinensis)、尖叶假蚊母树(Disty...     

桉树扦插育苗轻基质试验

试验结果表明：在１２种不同配方基质中,各组合基质间的干、湿重达极显著差异,扦插生根率和杯期苗木高生长达显著或极显著差异。以容积比为２：１的炭化木糠＋黄心土基质的平均每扦插杯干重和湿重都最轻,分别为４０．９ｇ和５２．１ｇ;扦插平均生根率最高的为泥炭土＋黄心土基质,生根率最低的为容积比１：１的炭化栲胶渣＋黄心土基质,分别为８５．％和６．７％;从基质改良角度考虑,容积比为２：１：１的木糠＋黄粘土＋黄心土     

Soil water affects transpiration response to rainfall and vapor pressure deficit in poplar plantation

Influences of environmental factors on transpiration are interactive. Sensitivities of transpiration responses to both evaporative demand and rainfall under contrasting soil water conditions constitute the physiological basis of the drought tolerance of trees. Such knowledge is practically significant for plantation management, especially for irrigation management. We therefore conducted a 6-year study on the transpiration of a poplar plantation in temperate China to elucidate the existence and pattern of the influence of the soil water over stand transpiration responses to (1) vapor pressure deficit (VPD), the major indicator of air dryness and (2) the rainfall, in terms of total amount and event size. The results showed that the response of plantation transpiration (E _c ) to VPD was conditioned by soil moisture. There was a significant difference in the frequency distribution of maximum sap flux under contrasting soil relative extractable water. E _c after rainfall of different sizes varied under similar VPD. The increasing occurrences of only large rainfall events led to enhanced total E _c during the growing season, but prolonged rainless intervals did not lead to a continuous decrease of E _c , suggesting appreciable supplements from the soil water were present to sustain transpiration. In addition, the balance of soil water between replenishment and extraction also conditioned the influence of rainfall over subsequent E _c during the respective rainless intervals. Based on the E _c responses to VPD and rainfall under different soil moisture levels, irrigation that directly replenishes the deep soil layers in order to alleviate water stress on transpiration during the small-rain event-dominated growing season is an effective and water-saving approach to guarantee trees survival during drought period.     

Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE

This study established a prediction model for bending properties of glued-laminated timber (glulam) using optimized knot and modulus of elasticity (MOE) distributions of lumber laminate as the main input variables. For this purpose, knot and MOE data were investigated for all pieces of lumber that were prepared for glulam manufacturing, and statistical distributions of knot size, knot number in one lumber, and MOE of each laminate were optimized as distribution functions. These knot and MOE data were used as input variables in the prediction model for bending properties, and were also used in generating virtual glulam using the inverse transform method. Prediction of bending properties for glulam was carried out using the transformed section method, which is partially provided in ASTM D 3737 (Annex A4). Predicted values were compared with those from full-scale four-point bending tests for 60 six-layered glulams with 10 different laminar combinations. Finally, the allowable bending properties of glulam for each specific laminate combination were determined by calculating the fifth percentile of the modulus of rupture and the average modulus of elasticity from virtual test results of more than 1000 virtual glulams. From the results of this study, predicted bending properties for glulam and their distributions could be used for structural design in both allowable stress design and limit state design.     

多重实时RT-PCR快速检测新型甲型H1N1流感病毒

从GenBank中获取新型甲型H1N1流感病毒(2009年流行株)HA和NA基因序列,通过多重序列比对之后,设计合成H1和N1基因特异性的引物和探针,用来建立新的甲型H1N1亚型流感病毒的多重实时RT-PCR检测方法.合成的两条荧光探针分别标记FAM和CY5荧光报告基团,荧光淬灭均使用BHQ基团.多重实时RT-PCR实验在ABl7500实时PCR仪上进行,经过40个循环的扩增之后,阳性对照出现标准的S型曲线,并且具有良好的特异性,可以很好地将新的甲型H1N1与传统的甲型H1N1以及H3N2、H5N1、H6N2和H9N2等流感病毒区分.多重实时RT-PCR可以检测到10个拷贝的模板,灵敏度接近检测方法的极限.检测时间短,从加样到反应结束只需要90 min.在对243例发热病人临床样品检测过程中发现7例阳性,1351份猪临床样品检测中未发现阳性,该检测结果和采用中国检验检疫科学研究院研制的试剂盒获得的检测结果一致.本研究所建立的快速、准确和高敏感性的多重实时RT-PCR方法非常适用于新型甲型H1N1流感病毒的实验室筛查.     

半夏干物质积累与氮、磷、钾吸收特点的研究

在田间条件下,研究了一年内半夏二个生长季的干物质积累与氮、磷、钾积累的特点及其相互关系。结果看出,半夏植株在苗期干物质积累较慢,珠芽形成和块茎膨大期积累迅速,生长后期（倒苗期）则又减慢。植株对氮、磷、钾的吸收特点与干物质积累趋势基本一致。不同生长期半夏对氮、磷、钾的吸收量不同。在第一生长季,出苗后生长30 d内对氮、磷、钾的吸收量较少,分别占该生长季吸收量的30.6%,27.7%和27.8%;生长至60 d时吸收量迅速增加,分别占该生长季的43.6%,52.3%和49.0%;60 d以后其吸收量又逐渐减少。半夏第二生长季对氮磷钾的吸收特点与第一生长季的基本一致。表明半夏一年内以对氮的吸收量最多,钾次之,磷最少,氮、磷、钾的吸收比例为1﹕0.63﹕0.87。     

不同间作绿肥替代化肥模式对木薯性状和产量的影响

通过探讨秸秆还田与化肥减施下间作绿肥对木薯产量性状的影响,着力解决连作木薯土壤肥力提高与改良相关技术的协调增效。于2019-2020年,以木薯品种“南美1号”为供试材料,设置8个处理,调查每个小区的木薯茎径、叶绿素（SPAD）、块根直径、块根长、单株茎秆鲜重、单株块根鲜重、株高、单片叶重、单株块根数以及小区产量等农艺性状。结果表明,处理5（木薯秆还田+化肥减量12.5%+12.5%营养元素当量黑豆绿肥还田）的木薯产量最高,并得到拟合方程。绿肥秸秆还田以及间作绿肥从整体上改良了土壤肥力,并通过显著影响木薯块根、单片叶重以及单株块根数而影响最终产量。