Liquid handling properties of hollow viscose rayon/super absorbent fibers nonwovens for reusable incontinence products

To develop reusable incontinence products, blend nonwovens of hollow viscose rayon (HVR) and super absorbent fibers (SAFs) were prepared using a needle-punching process and their liquid handling properties, such as the fluid absorption capacity, fluid retention capacity, fluid absorption under load, moisture evaporation rate, and repeated water absorption were investigated. As the SAF content in the HVR/SAF blend nonwovens was increased, the fluid absorption capacity, fluid retention capacity, and fluid absorption under load increased, whereas the moisture evaporation rate decreased. SAF had a more significant effect on fluid retention than fluid absorption. In the case of HVR/SAF(8/2) and HVR/SAF(7/3), more than 100 % of the fluid absorption capacity was retained even after 5 cycles of repeated water absorption tests. Overall, the HVR/SAF blend nonwovens are good candidates for reusable incontinence products.     

Impaired control of IRES-mediated translation in X-linked dyskeratosis congenita

The DKC1 gene encodes a pseudouridine synthase that modifies ribosomal RNA (rRNA). DKC1 is mutated in people with X-linked dyskeratosis congenita (X-DC), a disease characterized by bone marrow failure, skin abnormalities, and increased susceptibility to cancer. How alterations in ribosome modification might lead to cancer and other features of the disease remains unknown. Using an unbiased proteomics strategy, we discovered a specific defect in IRES (internal ribosome entry site)-dependent translation in Dkc1(m) mice and in cells from X-DC patients. This defect results in impaired translation of messenger RNAs containing IRES elements, including those encoding the tumor suppressor p27(Kip1) and the antiapoptotic factors Bcl-xL and XIAP (X-linked Inhibitor of Apoptosis Protein). Moreover, Dkc1(m) ribosomes were unable to direct translation from IRES elements present in viral messenger RNAs. These findings reveal a potential mechanism by which defective ribosome activity leads to disease and cancer.     

COMPARISON BETWEEN ULTRASONOGRAPHIC AND CLINICAL FINDINGS IN 43 DOGS WITH GALLBLADDER MUCOCELES

Cholecystectomy is the current standard recommended treatment for dogs with gallbladder mucoceles. However, medical management with monitoring has also been recommended for asymptomatic dogs. The purpose of this retrospective study was to compare ultrasonographic patterns of gallbladder mucoceles with clinical disease status in a group of dogs. For each included dog, the ultrasonographic pattern of the mucocele was classified into one of six types: type 1, immobile echogenic bile; type 2, incomplete stellate pattern; type 3, typical stellate pattern; type 4, kiwi like pattern and stellate combination; type 5, kiwi like pattern with residual central echogenic bile; and type 6, kiwi like pattern. A total of 43 dogs were included. Twenty‐four dogs, including 11 dogs with gallbladder rupture, were symptomatic. Nineteen dogs were asymptomatic. Cholecystectomy (n = 19), medical therapy (n = 17), or monitoring (n = 6) treatments were applied according to clinical signs and owners’ requests. One dog suspected of having gallbladder rupture was euthanized. Frequencies of gallbladder mucocele patterns were as follows: type 1 = 10 (23%), type 2 = 13 (30%), type 3 = 5 (12%), type 4 = 11 (26%), type 5 = 4 (9%), and type 6 = 0. In dogs with gallbladder rupture, type 2 (8/13) was the most common. No significant correlations were found between ultrasonographic patterns of gallbladder mucoceles and clinical disease status or gallbladder rupture. Findings indicated that ultrasonographic patterns of gallbladder mucoceles may not be valid bases for treatment recommendations in dogs.     

Thermal and mechanical properties of modified CaCO3 filled poly (ethylene terephthalate) nanocomposites

Poly(ethylene terephthalate) (PET)/CaCO₃ and PET/modified-CaCO₃ (m-CaCO₃) nanocomposites were prepared by melt blending. The morphology indicated that m-CaCO₃ produced by reacting sodium oxalate and calcium chloride, was well dispersed in PET matrix and showed good interfacial interaction with PET compared to CaCO₃. No significant differences in the thermal properties such as, glass transition, melting and degradation temperatures, of the nanocomposites were observed. The thermal shrinkage of PET at 120 °C was 10.8 %, while those of PET/CaCO₃ and PET/m-CaCO₃ nanocomposites were 2.9–5.2 % and 1.2–2.8 %, respectively depending on filler content. The tensile strength of PET/CaCO₃ nanocomposite decreased with CaCO₃ loading, whereas that of PET/m-CaCO₃ nanocomposites at 0.5 wt% loading showed a 17 % improvement as compared to neat PET. The storage modulus at 120 °C increased from 1660 MPa for PET to 2350 MPa for PET/CaCO₃ nanocomposite at 3 wt% loading, and 3230 MPa for PET/m-CaCO₃ nanocomposite at 1 wt% loading.     

Guided bone regeneration with beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone membrane in partial defects of canine humerus

This study was performed to evaluate the effect of beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone (TCP/PLGC) membrane in the repair of partial bone defects in canine proximal humerus. Three adult mixed-breed dogs were used during the experimental period. The length of the defect was quarter of the full length of humerus, and width of the defect was quarter of middle diameter of the lateral aspect of humerus. The humeri of each dog were divided into treatment (TCP/PLGC) and control groups. The defect was covered with TCP/PLGC membrane in treatment group. To evaluate regeneration of the bone, computerized tomography (CT) and histopathologic examination were performed. The radiopaque lines were appeared at the original defect sites in TCP/PLGC group but below the original site in control at 4th week. Radiopacity and thickness of the defect sites, and radiopaque lines were more increased at 8th week than those of 4th week. Histopathologic findings revealed fibrous connective tissue migration into the defect and the migration inhibited the structure of new cortex to be placed in the original level in control whereas new cortex growth was found in the level of original line in TCP/PLGC group. However, the new cortical bone in the TCP/PLGC group was thinner and less organized than the adjacent intact cortex, and the amount of new cancellous bones were also scanty. The result suggested that TCP/PLGC membrane is a good guided bone regeneration material to restore the original morphology of humerus in partial defect.     

Anticancer Activity of Mannose-Specific Lectin,BPL2, from Marine Green Alga Bryopsis plumosa

Lectin is a carbohydrate-binding protein that recognizes specific cells by binding to cell-surface polysaccharides. Tumor cells generally show various glycosylation patterns, making them distinguishable from non-cancerous cells. Consequently, lectin has been suggested as a good anticancer agent. Herein, the anticancer activity of Bryopsis plumosa lectins (BPL1, BPL2, and BPL3) was screened and tested against lung cancer cell lines (A549, H460, and H1299). BPL2 showed high anticancer activity compared to BPL1 and BPL3. Cell viability was dependent on BPL2 concentration and incubation time. The IC₅₀ value for lung cancer cells was 50 μg/mL after 24 h of incubation in BPL2 containing medium; however, BPL2 (50 μg/mL) showed weak toxicity in non-cancerous cells (MRC5). BPL2 affected cancer cell growth while non-cancerous cells were less affected. Further, BPL2 (20 μg/mL) inhibited cancer cell invasion and migration (rates were ˂20%). BPL2 induced the downregulation of epithelial-to-mesenchymal transition-related genes (Zeb1, vimentin, and Twist). Co-treatment with BPL2 and gefitinib (10 μg/mL and 10 μM, respectively) showed a synergistic effect compared with monotherapy. BPL2 or gefitinib monotherapy resulted in approximately 90% and 70% cell viability, respectively, with concomitant treatment showing 40% cell viability. Overall, BPL2 can be considered a good candidate for development into an anticancer agent.     

A review on microbial and toxic risk analysis procedure for reclaimed wastewater irrigation on paddy rice field proposed for South Korea

Water shortage has become a major agricultural concern, and “The Sustainable Water Resources Research Program” in Korea is currently addressing this problem through the development of treatment systems for reclaiming wastewater and the assessment of human health risks associated with its reuse. Through this program, started in 2001, many studies have examined various water resources. Reclaiming wastewater is one way to alleviate water-shortage pressures, and one of the major potential uses of reclaimed water is irrigation. However, the main concern with reusing reclaimed wastewater is the increased likelihood of human contact that might result in exposure to pathogens and increased health risks. Relatively few studies have examined the toxic risks using reclaimed wastewater for irrigation in rice paddy fields. This study provides an overview of methods for quantitative microbial risk assessment and toxic risk assessment of heavy metal concentrations developed in the previous studies that can be applied to the evaluation of rice paddy fields irrigated with reclaimed wastewater in South Korea.     

Acid-sensitivity and physical properties of polymethylmethacrylate and polyurethane films containing polymeric styryl dye

Solution-cast films of polymethylmethacrylate (PMMA) and polyurethane (PU) containing polymeric styryl dye up to 5% by weight were prepared to investigate their acid-sensitivity and mechanical and thermal properties. Original red samples due to styryl dye turned out yellow very rapidly as they were exposed to acid vapor of hydrochloric acid or p-toluenesulfonic acid. According to UV/VIS spectroscopic measurements, characteristic peak intensities near 430 nm and 520 nm increased or decreased relatively with exposed amounts of acid, respectively. Both PMMA and PU samples showed uniform color distribution due to a good miscibility between polymer and dye which can be evidenced by measurements of glass transition temperature. No significant difference in acid-sensitivity was found between PU and PMMA except relative absorbance. However, dependence of their mechanical properties on dye content was somewhat different with PU or PMMA. In case of PMMA, modulus and breaking stress increased up to about 50% with increasing dye content, whereas those of PU samples showed only slight increase. It was ascribed to whether the matrix polymer was in the glassy or rubbery state.     

Dyeing of cotton and polyester/cotton blend with disperse dyes using sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate (DBDCBS) at alkaline condition of room temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound,DBDCBS, has two reactive groups such as dichloro-s-triazinyl group andα, β-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.