Feeding activities of Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe) as affected by moisture content of wood

The relationship between the moisture content (MC) of wood blocks and the feeding activities of two Japanese subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), was investigated with two choice tests. When three wood blocks with low MC (6%–12%), middle MC (79%–103%), and high MC (140%–182%) were exposed to workers of C. formosanus and R. speratus in a choice test, the feeding preferences were found in the middle MC blocks for C. formosanus, and the middle and high MC blocks for R. speratus, although wood blocks of low MC were also attacked. In a second choice test, wood blocks consisting of five pieces with water-impregnated (MC: 133%–191%) top, middle, or bottom piece were exposed to workers of both species. Higher consumptions were generally obtained in water-impregnated wood pieces and bottom pieces.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.     

Effects of polyline simplification of dynamic GPS data under forest canopy on area and perimeter estimations

The objectives of this study were to determine Global Positioning System (GPS) positional errors while moving under the forest canopy and to clarify the effects of polyline simplification on area and perimeter estimations. We used the Pathfinder Pro XR and GPSMAP 76S, which are categorized as “high-end mapping” and “general navigation” GPS receivers, respectively. The field tests were conducted in both natural and plantation forests. The results showed that the Pathfinder Pro XR, which has better multipath rejection technology, worked well, especially in the plantation forest under unfavorable conditions of higher stand density. We used analysis of variance to clarify the effects of the receiver type, positioning mode, stand type, and polyline simplification method on area and perimeter estimations. The receiver type and positioning mode were found to be significant factors that affected area estimation. The Pathfinder Pro XR estimated the area more accurately than the GPSMAP 76S, and differential GPS estimated the area more accurately than autonomous GPS. With respect to the perimeter, the receiver type, positioning mode, and polyline simplification method were found to be significant factors. The results showed that perimeter estimation was improved by using the velocity filter, and further improved by using the velocity filter and Douglas-Peucker algorithm, especially when the Pathfinder Pro XR was used. The GPSMAP 76S estimated the perimeter accurately without any filtering because its default speed filter worked well, even though the GPSMAP 76S is a general navigation GPS receiver.     

Dielectric relaxation due to heterogeneous structure in moist wood

Dielectric properties in three main directions for hinoki wood (Chamaecyparis obtusa) specimens conditioned at various levels of relative humidity were measured in the frequency range from 20 Hz to 10 MHz over the temperature range from −150°C to 20°C. Three relaxations were observed in the specimens conditioned at high levels of relative humidity. The relaxation in the highest frequency range was ascribed to the motions of adsorbed water molecules. The relaxation in the middle frequency range remained unchanged by the ethanol–benzene extraction of specimens. The relaxation location was independent of measuring directions. The relaxation in the lowest frequency range was not detected in the specimens impregnated with methyl methacrylate (MMA). This result suggested that the relaxation was due to electrode polarization. The Cole-Cole circular arc law applied well to two relaxations recognized in the specimens impregnated with MMA. The relaxation magnitude in the middle frequency range was extremely large, and the distribution of relaxation times was very narrow. These characteristics suggested relaxation of the Maxwell-Wagner type resulting from the interfacial polarization in the heterogeneous structure, which included adsorbed water with large electrical conductivity within the insulating cell walls.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Effects of light and microsite conditions on tree size of 6-year-old Cryptomeria japonica planted in a group selection opening

We examined the extent to which direct and indirect measures of light and microsite conditions could explain variation in tree height and diameter at the base of 6-year-old Cryptomeria japonica trees planted in a group selection opening of about 0.32 ha on a steep slope at Shiiba, Miyazaki Prefecture, southern Japan. We first used the gap light index (GLI) and soil thickness (ST) as directly measured indices. For an indirect measure of light, we used a between-cohort competition index (BCI) estimated from the position and total height of residual trees. For indirect measures of microsite, we examined topographic indices (slope, plan and profile curvature, average slope gradient, and relative elevation) derived from digital elevation models (DEMs) with different resolutions ranging from 2 to 10 m. The multiple linear regression using GLI and ST explained about 45% of variation in tree size, while simple regression using only GLI explained about 35%. The contribution of ST was about half of GLI. The multiple regressions using BCI and the topographic indices did not explain any more variation than using BCI alone (R ² of about 0.26). We conclude that microsite conditions with shallower soil and steeper slope have negative effects on tree growth in group selection openings, although the relative importance is smaller than light conditions. More comprehensive studies considering several openings with more heterogeneous topography including different species are needed to generalize our growth prediction using the indirect measures, which are useful for practical forest management.     

Termite repellent sesquiterpenoids from Callitris glaucophylla heartwood

Fractions of methanol and ethanol extracts from the heartwood of white cypress pine (Callitris glaucophylla Thompson et Johnson) were investigated for their repellent activity against subterranean termite Coptotermes formosanus Shiraki worker using a two-choice semicircular filter paper test at 0.5% (w/w) concentration. Fraction CY-E2 composed of (−)-citronellic acid, guaiol, α-, β-, and γ-eudesmol isomers as well as an unknown compound, showed the highest statistically significant repellency (97.8% ± 2.2 SEM) of all fractions tested. Bioactivity-guided fractionations using high-performance liquid chromatography led to the isolation of two, oxygenated eudesmane-type sesquiterpenes with α-methylene moieties, both termite-repellent compounds. These compounds were subsequently identified as ilicic acid methyl ester (IAME) and costic acid by means of spectroscopic analyses, electron impact mass spectrometry, and nuclear magnetic resonance spectroscopy. We report the isolation of both IAME and costic acid from C. glaucophylla heartwood for the first time. Part of this paper was presented at the 47th Symposium on the Chemistry of Terpenes, Essential Oils, and Aromatics, Tokyo, November 2003