Shear strengths of wood measured by various short beam shear test methods

We conducted three types of short beam shear tests of western hemlock (Tsuga heterophylla Sarg.) under various span/depth ratios, and examined whether the maximum shear stress was used as the shear strength. The following results were obtained. (1) In the short beam shear tests under the three-point loading method, it was difficult to have the specimen failing by horizontal shear. We thought that this method should not be recommended for determining the shear strength of wood. (2) In the short beam shear tests under the asymmetric four-point loading of the specimen with a rectangular cross-section, the failure caused by horizontal shear occurred under some span/depth ratio range. Nevertheless, this range was dependent on the specimen geometry and was quite restricted. We therefore think that this method should not be recommended for determining the shear strength of wood. (3) In the short beam shear tests under the asymmetric four-point loading of the I-shaped specimen, failure caused by horizontal shear occurred under the span/depth ratio range wider than that applicable for the asymmetric four-point loading of the specimen with a rectangular cross-section. The maximum shear stress was stable in a certain span/depth ratio range and the value of the maximum shear stress is effective as a parameter for comparing the shearing strength of materials with each other.     

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.     

Tangential and radial shrinkage variation within trees in sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) cultivars

The transverse shrinkage variation within trees was examined for five sugi cultivars. The within-tree trends of tangential shrinkage (α _T) were different by cultivar, whereas radial shrinkage (α _R) increased from pith to bark in most cultivars. The tangential/radial shrinkage ratio (α _T/α _R) decreased from pith to bark in most cultivars, because the radial variation of α _R was larger than that of α _T. The cultivars showed significant differences among cultivars in α _T, α _R, and α _T/α _R, but the difference among cultivars for α _T/α _R was smaller. The relationships between transverse shrinkage and microfi bril angle (MFA), basic density (BD), tree ring parameters, and modulus of elasticity were examined. The α _T and α _R showed positive relationships with BD, latewood percentage, latewood density, and modulus of elasticity, and negative relationships with MFA and ring width. The relationships with earlywood density were weak. Sugi exhibited variation in transverse shrinkage within stem and among cultivars, with the variation affected by MFA, density, and tree ring parameters. Part of this article was presented at the 56th Annual Meeting of the Japan Wood Research Society, Akita, Japan, August 2006, and the 57th Annual Meeting of the Japan Wood Research Society, Hiroshima, Japan, August 2007     

Management approach using simple indices of deer density and status of understory vegetation for conserving deciduous hardwood forests on a regional scale

We investigated the validity and efficiency of a survey using sight per unit effort (SPUE) of sika deer and shrub-layer decline rank (SDR), which is an index of decline in the physical structure of a whole stand caused by sika deer, based on data collected on a broad scale. This survey was to be used to manage a deer population in order to conserve a forest ecosystem. First, we evaluated the spatial and temporal scales of deer density that are most appropriate for predicting decline in the status of understory vegetation. The model with SPUE calculated in a buffer with a radius of 4.5 km using data for the past 4 years was found to be the best. We showed that our knowledge of the relationship between deer density and status of shrub-layer vegetation is improved by identifying the most suitable spatial and temporal scales of SPUE for predicting SDR. Next, we quantified the effects of SPUE and environmental components on SDR in stands. We found that SPUE had the greatest effect on SDR among all explanatory variables. Moreover, the area under the curve (AUC) was large in a model that only used SPUE (AUC = 0.718). This result suggests that the variation in SDR among stands was explained well by SPUE regardless of differences in the forest environment. Furthermore, we identified the effective values of SPUE for preventing shrub-layer vegetation from declining through deer density control. We conclude that a management system based on SPUE and SDR is a simple and valid method for managing deer populations in order to conserve forest ecosystems.     

Leaf-litter decomposition of 15 tree species in a lowland tropical rain forest in Sarawak: decomposition rates and initial litter chemistry

In a lowland tropical rain forest in Sarawak, leaf-litter decomposition and the initial litter chemistry of 15 tree species were studied. During 13 months of field experiment, weight loss of litter samples was between 44% and 91%, and calculated decomposition rate constants (k) ranged from 0.38 to 2.36 year⁻¹. The initial litter chemistry also varied widely (coefficients of variation: 19%–74%) and showed low N and P concentrations and high acid-insoluble residue (AIS) concentration. For nutrient-related litter chemistry, correlations with the decomposition rate were significant only for P concentration, C/P ratio, and AIS/P ratio (r _s = 0.59, −0.62, and −0.68, n = 15, P < 0.05, respectively). For organic constituents, correlations were significant for concentrations of AIS and total carbohydrates, and AIS/acid-soluble carbohydrate ratio (r _s = −0.81, 0.51, and −0.76, n = 15, P < 0.05, respectively). These results suggested that the relatively slow mean rate of decomposition (k = 1.10) was presumably due to the low litter quality (low P concentration and high AIS concentration), and that P might influence the decomposition rate; but organic constituents, especially the concentration of AIS, were more important components of initial litter chemistry than nutrient concentrations.     

Impregnation of radiata pine wood by vacuum treatment II: effect of pre-steaming on wood structure and resin content

Radiata pine sapwood and heartwood were dried using high-temperature, conventional-temperature, and air drying schedules with and without pre-steaming. They were then impregnated by vacuum treatment with double-distilled water, toluidine blue, and fluorescein dye. For sapwood, there were only minor differences in uptake between drying methods and when pre-steaming was used. Using microscopy, the primary flow pathways in sapwood were found to be the resin canal network and ray parenchyma cells, which provided conduction without large resistance. In heartwood, uptake was strongly influenced by pre-steaming the green lumber. After pre-steaming heart-wood, there was an increase in uptake from all surfaces but especially from the radial surfaces. Lower extractive contents, disruption of epithelial and ray parenchyma cells, and alteration of the condition of bordered pits were also associated with pre-steaming. It was therefore possible to classify flow paths in radiata pine heartwood five ways, according to uptake values and wood anatomical features.This research was presented in part at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998.     

Effect of nitrogen sources on the chemical components in young plants

Nitrogen nutrition has great influences not only on the yields, but also on the chemical components of the plants. Nitrate nitrogen is generally found to be superior to ammonium nitrogen as the nitrogen source for higher plants (1). As reported in the previous paper (2), young plants of sugar beet grown with the culture solution containing a high level of ammonium nitrogen developed the symptom of ammonia toxicity. To make clear the mechanism of ammonia toxicity, comparative studies on the absorption and the assimilation of ammonium- and nitrate-nitrogen in higher plants at young stages of growth were carried out.     

聚合亚种间育性亲和基因的广谱亲和性水稻品系选育与初步利用

为克服亚种间杂交稻的各种生殖障碍,从Akihikari//IR36/Dular杂交后代中选育出在ga11和S5、S7、S8、S9、S15、S16位点上聚合有不同育性亲和基因的品系.经测交分析,2个品系聚合可改良亚种间杂交稻花粉育性的雄配子亲和基因ga11-n和6个雌配子亲和基因S5-n、S7-n、S8-n、S9-n、S15-n和S16-n,另2个品系聚合了6个雌配子育性亲和基因.育成品系与测验种杂交F1的育性检测表明,这些品系能消除各种雌、雄配子导致的败育障碍.2个粳型育成品系与籼型两用核不育系S27配制的杂种与汕优63相比具有明显的产量优势.这些品系可用作亚种间杂交稻育种的亲本或有利基因供体.     

Quantitative nested real-time PCR detection of <Emphasis Type="Italic">Verticillium longisporum</Emphasis> and <Emphasis Type="Italic">V. dahliae</Emphasis> in the soil of cabbage fields

Verticillium longisporum and V. dahliae, causal agents of Verticillium wilt, are spreading through the cabbage fields of Gunma Prefecture. Using the V. longisporum-specific intron within the 18S rDNA and differences between ITS 5.8S rDNA sequences in Japanese isolates of V. longisporum and V. dahliae, we developed three quantitative nested real-time (QNRT) PCR assays. The QNRT-PCR quantification of V. longisporum or V. dahliae in cabbage field soil was consistent with the severity of Verticillium wilt disease in those fields. In field trials of resistant cultivar YR Ranpo grown for three seasons in soil infested with the pathogen, disease severity and pathogen density in the soil were significantly reduced in a field moderately contaminated by V. dahliae, but only slightly reduced in a highly contaminated field. These results suggest that continuous cultivation of a resistant cultivar is an effective way to reduce the pathogen population. QNRT-PCR assays provide a powerful analytical tool to evaluate the soil population dynamics of V. longisporum and V. dahliae for disease management.     

Involvement of heme synthesis in the growth stimulation of maize seedlings by 5‐aminolevulinic acid

The growth of maize seedlings was stimulated by shoot‐applied 5‐aminolevulinic acid 2 days after treatment at 90 and 120 μmol L^?1. The effects of 5‐aminolevulinic acid on the activity of nitrate reductase (EC 1.6.6.2) and nitrite reductase (EC 1.7.7.1) and the chlorophyll, ammonium, heme and total free amino acid content were investigated by using maize seedlings to clarify the involvement of nitrogen metabolism and heme synthesis in the growth stimulation. 5‐Aminolevulinic acid increased the level of nitrate reductase activity at 90 μmol L^?1 and the ammonium and heme content at 90 and 120 μmol L^?1 2 days after treatment. The total amino acid content increased by 90 and 150 μmol L^?1 5‐aminolevulinic acid 2 and 3 days after treatment, respectively. However, no significant change was observed in the activity of nitrite reductase or the chlorophyll content after the 5‐aminolevulinic acid treatment. These results suggest that the enhancement of nitrogen metabolism by nitrate reductase activation is involved in the 5‐aminolevulinic acid‐induced stimulation of maize seedling growth. The activation of nitrate reductase might be related to an increase in the heme content following the 5‐aminolevulinic acid treatment.