Changes in soil carbon and nitrogen stocks after conversion of subtropical natural forest to loblolly pine plantations

Pinus plantations have increased in Brazil, and native forest areas have been converted for timber production. The clearing and the long-term loblolly pine (Pinus taeda L.) land-use effects on soil carbon and nitrogen stocks were evaluated in a natural broadleaved forest and in loblolly pine sites cultivated for 29, 35, 38 and 49 years, as well the soil contribution as ecosystem carbon pool. According to the exponential-decay model fitted to changes in carbon stock, the initial soil carbon stock of 200 Mg ha^?1 to a depth of 100 cm in the natural forest decreased by 36% over 49 years of pine cultivation (around 72.4 Mg ha^?1 of C). Around two-thirds of this decrease occurred in the top 30 cm of the soil and intensively in the first 12 years of cultivation, but slowly faded as carbon stock tended to reach a new steady state after approximately 49 years of cultivation. The soil nitrogen stock in the natural forest was 14.2 Mg ha^?1 to a depth of 100 cm and decreased by 36% over the 49 years. This decrease was linear according to the fitted model, especially in the top 30 cm where nitrogen decline was 83% and was proportionally more intense than the carbon decline. Despite the soil carbon decrease, soil remained the largest carbon reservoir in the ecosystem for the growing rotation time of loblolly pine in this region.

     

Biotechnology of the multipurpose tree species Arbutus unedo: a review

Arbutus unedo L. (strawberry tree, Ericaceae) is a woody species with a circum-Mediterranean distribu-tion. It has considerable ecological relevance in southern...     

Exothermic heat released during catalytic polymerization of basswood-methyl methacrylate composites

Summary Oven dried basswood was vacuum impregnated with methyl methacrylate monomer containing various amounts of free radical catalyst and trifunctional crosslinking agent. The wood-monomer composite was polymerized at 60°C in an air oven and the rate of heat generated was followed by means of a thermocouple placed in the center of the sample.Increasing the concentration of Vazo free radical catalyst in the basswood-MMA impregnated samples reduces the time to the exothermic peak and increases the exothermic peak temperature. High Vazo concentrations also decraase the percentage conversion of monomer to polymer.Trimethyl propane trimethacrylate (TMPTMA) crosslinker reduces the time to the exothermic peak and dramatically increases the exothermic peak temperature. The use of a crosslinker rapidly increases the initial viscosity of the system, and therefore, the autoacceleration of the polymerization is more pronounced.Our thanks are due to DuPont Company and Sartomer Resins for supplying the monomers and catalysts. Research funds were provided by Organized Research Budget of the College of Forestry.     

Development of cotton pests exhibiting different feeding strategy on water-stressed and kaolin-treated cotton plants

Consistent data demonstrate the positive response of sap-sucking insects to water-stressed plants, but there is a lack of information about the performance of chewing species, including whether their responses vary according to their feeding specializations. We tested the hypothesis that herbivores with distinct feeding strategies and host specialization will respond differently to two plant conditions, i.e. water deficit and kaolin treatment, where the latter is used to reduce abiotic and biotic plant stressors. We determined the development and reproduction of four major cotton pest species with different feeding strategies (chewing and sap sucking) and with specializations ranging from monophagous to polyphagous using well-watered or water-stressed cotton plants, which were treated or not treated with kaolin. Three chewing (lepidopteran) species, Alabama argillacea (Hüb.), Heliothis virescens (Fabr.) and Chrysodeixis includens (Walk), as well as one sap-sucking species, Bemisia tabaci (Gen.), were used as models. The neonate larvae of all three chewing species exhibited lower survival when fed the leaves of water-stressed plants. In addition, the neonate larvae fed leaves from water-stressed and kaolin-treated plants did not complete their development or they exhibited low survival. Older larvae also exhibited significantly lower survival on kaolin-treated plants. The effects on life history traits were more obvious in monophagous chewing species compared with polyphagous species when fed leaves from water-stressed plants. The performance of B. tabaci was superior on water-stressed and untreated kaolin plants. Thus, water-stressed and kaolin-treated plants negatively affected all chewing species, whereas water-stressed plants only positively affected the sap-sucking species.     

Analysis of information used in the management of plant genetic resources: a case study from northwestern Mato Grosso,Brazil

Evaluation and monitoring are critical to agroforestry (AFS) project management, especially if they aim to contribute to use and conservation of biodiversity and plant genetic resources. A methodology to analyze information used in decision-making processes was developed and applied in a biodiversity conservation project in the Brazilian Amazon. Quality of information gathered at landscape, AFS, species (Bactris gasipaes Kunth, both wild and cultivated varieties) and genetic diversity levels in three dimensions was analyzed. The information at the landscape level was good, while that in the organizational-institutional and socio-economic dimensions was acceptable; information gaps were serious in the genetic-ecological dimension. Ecological and economic functionality assessment based on indicators built upon reported administrative actions suggests that information related to conservation played a greater role in decision-making and management than information associated with use and development. The application of the methodology proved instrumental for enhancing efficacy of decision-making within an adaptive management approach to plant genetic resources use and conservation.     

Origin of the acetylated structures present in white birch (Betula pendula Roth) milled wood lignin

The occurrence and nature of acetate groups in the milled wood lignin (MWL) isolated from birch (Betula pendula Roth) has been addressed by spectroscopic (2D-NMR) and chemical degradative (derivatization followed by reductive cleavage, DFRC) methods. Considerable amounts of acetate groups were present in the MWL preparation. However, 2D-NMR analysis indicated that the lignin polymer is not extensively acetylated and that the major part of the acetate groups is attached to the xylan moieties present in the MWL preparation. Nevertheless, evidence of the presence of minor acetylation of the γ-carbon of the lignin side chain (<3% of both syringyl and guaiacyl lignin units) was provided by DFRC analysis.     

The influence of heartwood on the pulping properties of Acacia melanoxylon wood

The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively) as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries     

Evidence that the negative relationship between seed mass and relative growth rate is not physiological but linked to species identity: a within-family analysis of Scots pine

Seed mass and relative growth rate (RGR) are important determinants of early seedling growth, and hence seedling establishment. Although a positive interspecific relationship between seed mass and seedling dry mass is well established, much less is known about the relationships among seed mass, seedling mass and RGR within species. We examined relationships among seed mass, seedling mass and RGR within and among maternal plant lines of Scots pine (Pinus sylvestris L.). To assess the effects of seed mass and maternal origin on RGR, individual seeds from two seed crops (years 2004 and 2005) of ten maternal plants growing under nursery conditions were weighed and then germinated. Seed mass was strongly determined by maternal plant, and seedling mass was largely determined by seed mass, with a positive correlation between these variables both across and within maternal plants. In contrast, RGR was weakly related to seed mass, with no consistent pattern in the sign of the relationship. It is well known that species differ in RGR and that RGR is related to seed mass across species. Lack of consistent evidence for this relationship within maternal lines, and for Scots pine overall, suggests that the relationship is not directly causal, but reflects consistent evolutionary covariation in these two physiologically independent traits.     

A new lupene triterpenetriol and anticholinesterase activity of Salvia sclareoides

A new lupene triterpenetriol was isolated from the acetone extract of the aerial parts of Salvia sclareoides and characterised as (1beta,3beta)-lup-20(29)-ene-1,3,30-triol (1). In addition, nepetidin (2), nepeticin (3), lupendiol (4), (1beta,11alpha)-dihydroxy-lup-20(29)-en-3-one (5), ursolic acid (6), sumaresinolic acid (7) and hederagenin (8), were identified in this Salvia sp. To the best of our knowledge, the compounds 2 and 7 are new constituents in Salvia spp. The acetone, ethanol, butanol and water extracts of the plant were screened for the in vitro inhibitory activity of acetylcholinesterase (AChE) and butyrilcholinesterase (BChE), enzymes which play a role in the Alzheimer disease. All extracts inhibited acetylcholinesterase activity at 10 microg/ml, a remarkable activity since the standard drug rivastigmine does not inhibit acetylcholinesterase at the same concentration. Regarding the butyrilcholinesterase, the acetone extract at 1000 microg/ml was able to inhibit completely the enzyme activity and the butanol and ethanol extracts, at this concentration, produced a potent inhibition of BchE.     

Steam explosion pretreatment used to remove hemicellulose to enhance the production of a eucalyptus organosolv dissolving pulp

The steam explosion (SE) pretreatment associated with the organosolv process was investigated to produce dissolving pulp from eucalyptus. Prehydrolysis Kraft (PHK) pulping was also done to produce viscose and acetate grade pulps as reference. The organosolv pulps were delignified in two steps with sodium chlorite. Viscose and acetate grade PHK pulps were bleached by OD₀(EH)D₁P and OD₀(EP)D₁PCCE sequences, respectively. Dilute acid-catalyzed (with acid addition) SE pretreatment dissolved more xylan than auto-catalyzed (no acid addition) SE pretreatment. Steam-exploded unbleached organosolv pulps showed lower residual lignin content and screened yield than unbleached organosolv pulps without SE pretreatment. Steam explosion pretreatment helped to decrease lignin content and damaged fiber length of unbleached organosolv pulps. The 1.0% H₂SO₄ organosolv pulp (organosolv dissolving pulp at bioconversion conditions) showed the highest reactivity. Even showing low viscosity for some applications, in general, the organosolv dissolving pulps produced in this study can be used for making lyocell fibers.