Characterization and mechanical properties of prepolymer and polyurethane block copolymer with a shape memory effect

The prepolymer and the final polyurethane (PU) block copolymer were synthesized by reacting 4,4-methylene bis(phenylisocyanate) with poly(tetramethylene glycol) and the prepolymer with 1,4-butanediol as a chain extender, respectively, to investigate the relation between phase separation and it’s resulting properties. According to FT-IR data, the phase separation of hard and soft segments in the prepolymer and the PU block copolymer grew bigger by increasing the hard segment content, and the PU showed more dominant phase separation than the prepolymer. The heat of fusion due to soft segments decreased in both the prepolymer and the PU by increasing the hard segment content, whereas the heat of fusion due to hard segments increased in the PU did not appear in the prepolymers. The breaking stress and modulus of the prepolymer increased by increasing the hard segment content, and the elongation at break decreased gradually, and the PU showed the highest breaking stress and modulus at 58 % hard segment content. However, the best shape recovery of the PU was obtained at 47 % hard segment content due to the existence of proper interaction among the hard segments for shape memory effect. Consequently, the mechanical properties and shape memory effect of the PU were influenced by the degree of phase separation, depending on the incorporation of chain extender as well as the hard segment content.     

Application of electrospun polyurethane web to breathable water-proof fabrics

Electrospun web may possibly be widely applied to protective garments or specialty textiles due to its high level of protection as well as comfort. Of particular interest in this study is to develop waterproof-breathable fabric by applying electrospun web of polyurethane directly onto the substrate fabric. The optimal electrospinning condition was examined with regards to the concentration, applied voltage and tip-to-collector distance. Solvent-electospinning of polyurethane was performed at the optimum condition, using N,N-dimethylacetamide as solvent. The thickness of 0.02 mm of electrospun web was applied onto the polyester/nylon blended fabric. For comparison, the polyester/nylon fabrics were coated with 0.02 mm thickness of polyurethane resin membranes adopting four different conditions. The electrospun PU web/fabric was compared to resin coated fabrics in terms of water-proof and breathable properties. The electrospun web applied fabric showed higher air permeability, vapor transmission, and thermal insulation properties than resin coated fabrics, which can be translated as greater comfort sensation of electrospun applied fabrics. However, water resistance value of electrospun web applied fabric did not reach that of resin coated fabrics.     

Basic study on the two-tone color dyeing of PET and PVC wig fibers by carrier dyeing method

PET or PVC wig fibers are usually colored by the dope dyeing method in which the pigment or color master batch is mixed before the spinning process. However, the colored fibers need to be dyed again to obtain a two-tone color along the longitudinal fiber direction. In this study, PET and PVC fibers were dyed by the carrier dyeing method using a disperse dye, and the dyeing behavior was investigated. The fiber was dyed at various carrier and dye concentrations. The dye uptake increased with increasing carrier concentration or dye concentration. The saturation of the dye uptake was observed in each case. No change of the glass transition temperature (T_g) was observed in the 1st run of the DSC thermogram, however, a decrease in the value of T_g was observed in the 2nd run performed after the 1st run sample was quenched and re-measured. The reduction in the value of T_g implies that the carrier acted as a plasticizer in the fiber and enhanced the segmental mobility of the polymer chains. The dyeing temperature and carrier concentration were varied and the diffusion coefficients of the dye and activation energy were measured. The activation energy was increased at a higher carrier concentration, because the carrier acted as a plasticizer and lowered the energy barrier to the penetration of the dye molecule into the polymer chains.     

Metabolic dependence of green tea on plucking positions revisited: a metabolomic study

The dependence of global green tea metabolome on plucking positions was investigated through (1)H nuclear magnetic resonance (NMR) analysis coupled with multivariate statistical data set. Pattern recognition methods, such as principal component analysis (PCA) and orthogonal projection on latent structure-discriminant analysis (OPLS-DA), were employed for a finding metabolic discrimination among fresh green tea leaves plucked at different positions from young to old leaves. In addition to clear metabolic discrimination among green tea leaves, elevations in theanine, caffeine, and gallic acid levels but reductions in catechins, such as epicatechin (EC), epigallocatechin (EGC), epicatechin-3-gallate (ECG), and epigallocatechin-3-gallate (EGCG), glucose, and sucrose levels were observed, as the green tea plant grows up. On the other hand, the younger the green tea leaf is, the more theanine, caffeine, and gallic acid but the lesser catechins accumlated in the green tea leaf, revealing a reverse assocation between theanine and catechins levels due to incorporaton of theanine into catechins with growing up green tea plant. Moreover, as compared to the tea leaf, the observation of marked high levels of theanine and low levels of catechins in green tea stems exhibited a distinct tea plant metabolism between the tea leaf and the stem. This metabolomic approach highlights taking insight to global metabolic dependence of green tea leaf on plucking position, thereby providing distinct information on green tea production with specific tea quality.     

Dose and release pattern of anabolic implants affects growth of finishing beef steers across days on feed

Four experiments evaluated the effect of implant dose and release pattern on performance and carcass traits of crossbred beef steers. In Exp. 1, steers (4 to 7 pens/treatment; initial BW = 315 kg) were fed an average of 174 d. Treatments were 1) no implant (NI); 2) Revalor-S [120 mg of trenbolone acetate (TBA) and 24 mg of estradiol 17β (E(2)); REV-S]; 3) Revalor-IS followed by REV-S (cumulatively 200 mg of TBA and 40 mg of E(2); reimplanted at 68 to 74 d; REV-IS/S); and 4) Revalor-XS (200 mg of TBA and 40 mg of E(2); REV-X). Carcass-adjusted final BW was greater (P < 0.05) for REV-X and REV-IS/S than for REV-S (610, 609, and 598 kg, respectively). Daily DMI did not differ (P > 0.10) among the 3 implants, but carcass-adjusted G:F was greater (P < 0.05) for REV-X and REV-IS/S than for REV-S (0.197 and 0.195 vs. 0.188). Both HCW and LM area were greater (P < 0.05) for REV-X and REV-IS/S than for REV-S. Marbling scores were greatest (P < 0.05) for REV-S and least (P < 0.05) for REV-IS/S; REV-X was intermediate to NI and REV-IS/S. In Exp. 2, steers (10 pens/treatment; initial BW = 391 kg) were fed 131 d, with treatments of REV-S, REV-IS/S (reimplanted at 44 to 47 d), and REV-X. Carcass-adjusted final BW (598 kg), ADG (1.6 kg), DMI (9.4 kg), G:F (0.17), and HCW did not differ (P > 0.10) among treatments. The percentage of Choice was less (P < 0.05) and percentage of Select greater (P < 0.05) for REV-IS/S than for REV-S and REV-X. In Exp. 3, steers (10 pens/treatment; initial BW = 277 kg) were fed 197 d and received either REV-IS/S (reimplanted at 90 to 103 d) or REV-X. Carcass-adjusted final BW (625 vs. 633 kg) and ADG (1.81 vs. 1.76 kg) were greater (P < 0.05) for REV-X-implanted steers. Daily DMI did not differ, but G:F tended (P < 0.10) to be increased and HCW was greater (P < 0.05) for REV-X than for REV-IS/S. In Exp. 4, steers (8 pens/treatment; initial BW = 238 kg) were fed 243 d and received either REV-IS/S (reimplanted at 68 to 71 d) or REV-X. Carcass-adjusted final BW (612 kg), ADG (1.54 kg), DMI (7.55), and G:F (0.21) did not differ (P > 0.10) for REV-IS/S and REV-X-implanted steers. Carcass traits did not differ among implants, but the percentage of Choice carcasses was greater (P < 0.05) and percentage of Select was less (P < 0.05) for REV-X than for REV-IS/S. These data indicate that when TBA/E(2) dose is equal, the altered release rate of REV-X can improve performance and quality grade, but these effects depend on duration of the feeding period and timing of initial and terminal implants.     

Detection and characterization of bovine-like coronaviruses from four species of zoo ruminants

Five coronaviruses (CoVs) were detected in diarrheal feces from four zoo ruminant species: one wisent (Bison bonasus), two Himalayan tahr (Hemitragus jemlahicus), one sitatunga (Tragelaphus spekii), and one nyala (Tragelaphus angasii). We sequenced and analyzed the spike (S) and hemagglutinin/esterase (HE) genes of these viruses and compared the nucleotide (nt) and deduced amino acid (aa) sequences with those of other bovine CoV (BcoV) strains. Comparison of the entire deduced aa sequences of the S and HE glycoproteins revealed no specific differences that would account for discrimination between bovine-like CoV strains from zoo ruminants and BcoVs strains. In addition, the 99.9% aa identity among the five CoV strains revealed that the ruminants were infected by the same strain. Phylogenetically, bovine-like CoVs belong to group 2a CoVs, which are related most closely to the BcoV strains recently isolated in Korea. These data suggest that cattle are potential reservoirs for CoVs that are capable of infecting zoo ruminants.     

Removal of Phosphate from Aqueous Solution by Functionalized Mesoporous Materials

In the present study, the applications of mesoporous materials based on silica, namely post-synthesized, one-pot synthesized, and pure MCM-41, were investigated for the removal of phosphate from aqueous solution. The mesostructures were confirmed by X-ray diffraction, Brunauer?CEmmett?CTeller, Fourier transform spectroscopy, and transmission electron microscopy. The absorptions of phosphate by the mesoporous adsorbents were examined, with different adsorption models used to describe the equilibrium and kinetic data. The maximum adsorption capacities of the mesostructure adsorbents were found to be 45.162, 40.806, and 31.123 mg g^?C1 for the post-synthesized, one-pot synthesized, and pure MCM-41, respectively. The kinetic data showed that the adsorptions of phosphate onto the post-synthesized and pure MCM-41 followed the pseudo-first-order kinetic model, whereas the one-pot synthesized adsorbent was described by the pseudo-second-order model.