The Control Strategy for the Excitation System of Asynchronized Turbogenerators

In this paper, the excitation principle and operating characteristics ofasynchronized turbogenerators are analyzed,and adaptive tracing iterative control strategy based on state identification is proposed. In order to apply this control scheme to practice engineering, some primary elements are analyzed and presented for constituting dual-channel automatic excitation control system of asynchronized turbogenerators. Finally, the paper presents the principle structure charts about excitation control system of asynchroized turbogenerators.     

The Maximum Edge-Edge Connectivity of Quasi-Regular Graphs

The edge-edge connectivity of a graph is defined,and a class of quasi-regulargraphs is proposed with a maximum edge-edge connectivity.     

Fire resistance performance on restrained high strength Q460 steel beams

为了研究约束高强度Q460钢梁的抗火性能,在已有约束钢梁分析理论的基础上,引入残余应力,提出了约束钢梁的抗火性能分析方法,并采用普通强度约束钢梁试验数据对分析方法进行了验证。考虑高强度Q460钢材高温下力学性能参数,利用所提出的方法分析了约束高强度Q460钢梁的抗火性能,并与普通强度Q345钢梁进行了对比。对影响约束高强度Q460钢梁的抗火性能参数进行了分析,包括荷载比、残余应力、轴向约束刚度、转动约束刚度和受火方式等。研究表明：所提出的分析方法准确可靠,高强度Q460钢梁抗火性能与普通强度钢梁具有较大的区别,高强度Q460约束钢梁的抗火性能明显优于普通强度约束钢梁。荷载比、轴向约束刚度、转动约束刚度、受火方式对高强度Q460约束钢梁有较大影响。     

Deformation of deep foundation pits due to excavation and dewatering considering the change of void ratio and permeability coefficient with current stress of soil

基于修正剑桥模型理论,推导了孔隙比e随土体当前应力变化的方程,同时比选了4组经典的描述渗透系数k随孔隙比变化的方程,选择了其中一组最佳的估算公式,编写ABAQUS用户子程序VOIDRI和USDFLD,以实现孔隙比和渗透系数随土体当前应力的变化。在此基础上,研究深基坑降水开挖所致的坑内外土体的变形、围护结构的变形及弯矩,得到以下结论：当考虑孔隙比随土体当前应力变化时,坑外地表沉降量、墙体的水平位移、地下连续墙的弯矩、坑底隆起量均大于孔隙比为定值时的情况;当考虑渗透系数随土体当前应力变化时,坑外地表沉降量、墙体的水平位移、地下连续墙的弯矩均小于渗透系数为定值时的情况,但同时考虑渗透系数和孔隙比变化情况时,其对坑底的隆起量的影响可以忽略不计。     

蠕变模型对约束钢梁抗火性能分析的影响

钢材在高温和荷载作用下产生明显蠕变变形,影响火灾中结构的变形和受力性能。现有的蠕变模型较多,但没有一个广泛适用的蠕变模型。不同的蠕变模型对钢结构抗火分析结果有很大影响。为了量化蠕变模型对约束钢梁抗火性能分析的影响,对5种常用的蠕变模型进行了对比分析。采用编写的约束钢梁计算程序,分别计算5种蠕变模型下约束钢梁的抗火性能并与试验数据进行对比。结果表明,采用Norton蠕变模型的计算结果与试验数据吻合最好。最后对影响约束钢梁抗火性能参数进行了研究,研究发现,Harmathy蠕变模型对约束梁抗火性能分析结果影响最大;不同蠕变模型对不同荷载比、约束刚度下的约束钢梁抗火性能影响程度均不同。     

THE INDUSTRIAL ORGANIZATIONS AND THE L-S-BUSINESS STRATEGIES

This papar presents an evolution model in business behaviors-the L-S Business Strategies,gives some examples and predictions which support these strategies,and analyzes the relationship between the industrial organizations in China and the L-S Business strategies.     

THE CHANGE LAW OF THE COAL''S STRUCTURE PARAMETER WITH INCREASING THE TEMPERATURE

In this paper,we have studied the change law of the structural parameter of coal in Nan Tong Coal Mine with the increasing the temperature. At the same time, we explore the cause of the changes with the electron microscope and of infrared spectrum.     

黄淮夏大豆形态性状的遗传研究

本文以黄淮地区6个夏大豆品种(系)通过双列杂交保留下来的F_3代材料,研究大豆6个形态性状的遗传特性.结果表明,株高、有效分枝数、主茎节数、主茎荚丛数和茎粗5个性状均符合加性—显性模型.而底荚高则存在非等位基因之间的互作效应.株高、有效分枝数、主茎节数和主茎荚丛数为部分显性,茎粗存在超显性现象.主茎节数和主茎荚丛数可能有相似的遗传特点.豫豆8号大豆带有较多的控制株高的显性基因,油84-30大豆带有较多的控制分枝和茎粗的显性基因,而尖顶大白角大豆控制主茎节数和美丛数的显性基因较多.     

半夏小块茎的形态发生及人工种子制作

离体培养中，经过小块茎发生途径从半夏叶柄诱导了完整植株。用实体解剖、连续切片和三维结构重组等方法观察分析得出：小块茎顶端的叶原基由于不对称生长逐渐将顶端分生组织复盖，随后叶原基的尖端和两侧生长延缓，生长中心转移到背轴面中央，结果导致叶原基长帽状结构。不同发育程度的雏叶和叶原基总是相互叠在一起顶端分生组织复盖于下面。小块茎枯端形成芽的同时，在顶芽附近分化根。     

A STUDY ON FRACTURE MECHANICS OF BRITTLE MATERIAL WITH PER-CRACKS

In this paper the fracture process of specimen,with single crack, double cracks and triple cracks is observed and analysed. The experimental results show that the fracture process of specimen is different because of the differention of the number, the distance and the type of array of cracks. And the fracture propagation of specimen with triple cracks and double cracks is foundmentally the same.