Characterization of char from the pyrolysis of tobacco

Pyrolysis of tobacco was studied in oxidative and nonoxidative (inert) environments at atmospheric pressure and temperatures ranging from 150 to 750 degrees C. The objective was to study the effect of pyrolysis conditions on the characteristics of the solid residue, i.e., char. The char was characterized using cross-polarization (13)C nuclear magnetic resonance (CPMAS NMR), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), the Brunauer-Emmett-Teller (BET) surface area, and the elemental composition. The char yield from pyrolysis (i.e., nonoxidative) decreased sharply with an increase in temperature to ca. 22% (dry, ash-free basis) at high temperatures. In oxidative pyrolysis, i.e., in 5% oxygen, the char was completely oxidized above 600 degrees C. The gaseous product from pyrolysis at high temperatures contained a significant concentration of hydrogen. The surface area of the char was low, with a maximum of 8 m(2)/g at 400 degrees C. SEM analysis indicated that pyrolysis of the tobacco led to a gradual accumulation of inorganic crystals on the exposed surfaces, and some constituents also melted, resulting in the formation of vesicles by evolving gas. NMR analysis showed significant changes in pectin and sugar constituents of the tobacco and breaking of glycosidic bonds of cellulose at 300-500 degrees C before the char became predominantly aromatic at high temperatures. FTIR results showed a continuous decrease in the intensity of the OH stretch with temperature and the aromatic character to be at maximum at 550-650 degrees C. The H/C ratio of the char decreased continuously with temperature, while the O/C ratio became constant above 300 degrees C due to the presence of oxides and carbonates in the char. The results are consistent with the analysis of the evolved gases.     

High-resolution holocene environmental changes in the thar desert, northwestern india

Sediments from Lunkaransar dry lake in northwestern India reveal regional water table and lake level fluctuations over decades to centuries during the Holocene that are attributed to changes in the southwestern Indian monsoon rains. The lake levels were very shallow and fluctuated often in the early Holocene and then rose abruptly around 6300 carbon-14 years before the present (14C yr B.P.). The lake completely desiccated around 4800 (14)C yr B.P. The end of this 1500-year wet period coincided with a period of intense dune destabilization. The major Harrapan-Indus civilization began and flourished in this region 1000 years after desiccation of the lake during arid climate and was not synchronous with the lacustral phase.     

Epitaxial BiFeO3 multiferroic thin film heterostructures

Enhancement of polarization and related properties in heteroepitaxially constrained thin films of the ferroelectromagnet, BiFeO3, is reported. Structure analysis indicates that the crystal structure of film is monoclinic in contrast to bulk, which is rhombohedral. The films display a room-temperature spontaneous polarization (50 to 60 microcoulombs per square centimeter) almost an order of magnitude higher than that of the bulk (6.1 microcoulombs per square centimeter). The observed enhancement is corroborated by first-principles calculations and found to originate from a high sensitivity of the polarization to small changes in lattice parameters. The films also exhibit enhanced thickness-dependent magnetism compared with the bulk. These enhanced and combined functional responses in thin film form present an opportunity to create and implement thin film devices that actively couple the magnetic and ferroelectric order parameters.     

Giant piezoelectricity on Si for hyperactive MEMS

Microelectromechanical systems (MEMS) incorporating active piezoelectric layers offer integrated actuation, sensing, and transduction. The broad implementation of such active MEMS has long been constrained by the inability to integrate materials with giant piezoelectric response, such as Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3) (PMN-PT). We synthesized high-quality PMN-PT epitaxial thin films on vicinal (001) Si wafers with the use of an epitaxial (001) SrTiO(3) template layer with superior piezoelectric coefficients (e(31,f) = -27 ± 3 coulombs per square meter) and figures of merit for piezoelectric energy-harvesting systems. We have incorporated these heterostructures into microcantilevers that are actuated with extremely low drive voltage due to thin-film piezoelectric properties that rival bulk PMN-PT single crystals. These epitaxial heterostructures exhibit very large electromechanical coupling for ultrasound medical imaging, microfluidic control, mechanical sensing, and energy harvesting.     

Multivariate analysis and genetic diversity for morphometric and root textural quality traits in ashwagandha (Withania somnifera Dunal)

Ashwagandha (Withania somnifera) is an important medicinal plant and its dried roots are used in traditional systems of medicine. The market price of roots is determined by physical (textural) quality. Brittle roots with high starch and low fiber are considered to be superior because of ease in grinding. Genetic diversity studies based on root textural parameters have not been done so far. So the present study was designed to assess genetic diversity for morphometric traits and root textural quality parameters among two morphologically distinct groups: Poshita and Nagore. The PCA separated the morphometric and root texture variables distinctly into two different principal components: PC-1 and PC-2 respectively, indicating that both are negatively associated. All the morphotypes in Poshita group showed high positive loadings in PC-1 indicating that component genotypes are high root yielding. Nagore morphotypes were low yielding but the root texture was good. Clustering of morphotypes grouped Poshita and Nagore separately with high inter-cluster distances indicating that both groups are highly divergent from each other, suggesting that there is sufficient scope for varietal improvement through hybridization.     

Effect of planting date on growth, development, aerial biomass partitioning and essential oil productivity of wild marigold (Tagetes minuta) in mid hills of Indian western Himalaya

A field investigation was conducted at the Institute of Himalayan Bioresource Technology, Palampur during the year 2005 to study the effect of planting dates on duration of growth and development in wild marigold (Tagetes minuta). Duration of growth phases (vegetative phase to budding phase and budding phase to 50% flowering phase), aerial biomass partitioning and essential oil production were analysed. Plantings were done in seven consequent meteorological standard weeks (MSWs) starting from the 30th MSW (30 July–5 August). Planting time coincided with distinct changes in weather parameters and consequently significant variation in the performance of the crop. The results indicated that the crop planted in the 30th and 31st MSW had the longest duration of growth and highest aerial biomass. But it partitioned more biomass towards the stem, whereas the crop planted in the 35th MSW produced significantly less biomass than the former and partitioned more towards leaf and flower and had maximum essential oil content and production. The crop planted at the 36th MSW had the minimum field duration of growth of 50 days, but the partitioning towards leaf and flower were higher than the longest field duration of growth (30th MSW). The study clearly indicated that planting dates had profound influence on growth and development of T. minuta as reflected from the significant variation on growth phase duration, aerial biomass partitioning, herb and essential oil yield.     

A PCR-based assessment of genetic diversity,and parentage analysis among commercial mango cultivars and hybrids

Summary

Three different PCR methods [Random Amplified Polymorphic DNA (RAPD), Inter-Simple Sequence Repeats (ISSR), and Directed Amplification of Minisatellite DNA (DAMD)] were used to analyse genetic diversity and parentage among 20 mango cultivars, including 18 landraces and two hybrids (‘Amrapali’ and ‘Mallika’). These hybrids together with a third hybrid (‘Ratna’), and an out-group species (Mangifera sylvatica) were also analysed for parentage. Fifteen, seven and four primers were used to amplify a total of 158, 69 and 59 distinct DNA fragments by RAPD, ISSR and DAMD, respectively. Of these, approx. 85%, 64% and 90% were polymorphic, respectively. Genetic distances between pairs of mango cultivars were measured separately by each method and depicted graphically as a Neighbor Joining (NJ) tree. The three methods revealed different groupings of cultivars and hybrids. A NJ tree based on the cumulative data from all methods correlated well with the parentage of the mango hybrids, and the grouping of cultivars on a regional basis. Genetic markers likely to be associated with important agronomic traits were identified by further analysing the hybrids, with their respective parents, using all three methods. On the basis of the highest number of polymorphic bands observed (90%), DAMD was judged to be the best method with which to analyse mango germplasm.     

Prospective use of bacteriocinogenic Pediococcus pentosaceus as direct-fed microbial having methane reducing potential

Direct-fed microbials(DFM), generally regarded as safe status, are successfully used in improving rumen ecology, gastro-intestinal health, feed efficiency, milk production and growth rate in ruminants. On the other hand, methanogenesis in rumen, which accounts for a significant loss of ruminant energy and increased greenhouse gas in environment, is of great concern, therefore, use of DFM for improving productivity without compromising the animal health and ecological sustainability is encouraged. The present study was conducted to investigate the methane reducing potential of bacteriocinogenic strain Pediococcus pentosaceus-34. Since, the culture showed no hemolysis on blood agar and DNase activity, hence, it was considered to be avirulent in nature, a prerequisite for any DFM. The culture also showed tolerance to pH 5.0 for 24 h with 0.5% organic acid mixture, whereas when given a shock for 2 h at different p H and organic acids concentrations, it showed growth at pH 3.0 and 4.0 with 0.1 and 1.0% organic acids, respectively, as having good animal probiotics attributes. The total gas production was significantly(P<0.05) higher in live pedicoccal culture(LPC) and dead pedicoccal culture(DPC) both with wheat straw, when compared to the control. In sugarcane bagasse, gas production was significantly lower(P<0.05) with LPC compared to the control and DPC both. Methane was reduced by the inclusion of LPC in sugarcane bagasse(0.07 mL CH4 mg–1 dry matter digestibility) with no effect on other rumen fermentation parameters. However, with wheat straw and LPC total gas, in vitro dry matter digestibility, total volatile fatty acids increased significantly but no reduction in methane production was observed in comparison to the control. Therefore, further research is warranted in this direction, if the bacteriocinogenic strains can be used as DFM for ruminants to improve the ruminant productivity.     

Properties of gamma-ray burst progenitor stars

We determined some basic properties of stars that produce spectacular gamma-ray bursts at the end of their lives. We assumed that accretion of the outer portion of the stellar core by a central black hole fuels the prompt emission and that fall-back and accretion of the stellar envelope later produce the plateau in the x-ray light curve seen in some bursts. Using x-ray data for three bursts, we estimated the radius of the stellar core to be approximately (1 - 3) x 10(10) cm and that of the stellar envelope to be approximately (1 - 2) x 10(11) cm. The density profile in the envelope is fairly shallow, with rho approximately r(-2) (where rho is density and r is distance from the center of the explosion). The rotation speeds of the core and envelope are approximately 0.05 and approximately 0.2 of the local Keplerian speed, respectively.