Energy and water balance measurements for water productivity analysis in irrigated mango trees, Northeast Brazil

Crop water parameters, including actual evapotranspiration, transpiration, soil evaporation, crop coefficients, evaporative fractions, aerodynamic resistances, surface resistances and percolation fluxes were estimated in a commercial mango orchard during two growing seasons in Northeast Brazil. The actual evapotranspiration (E_a) was obtained by the eddy covariance (EC) technique, while for the reference evapotranspiration (E₀); the FAO Penman–Monteith equation was applied. The energy balance closure showed a gap of 12%. For water productivity analysis the E_a was then computed with the Bowen ratio determined from the eddy covariance fluxes. The mean accumulated E_a for the two seasons was 1419 mm year⁻¹, which corresponded to a daily average rate of 3.7 mm day⁻¹. The mean values of the crop coefficients based on evapotranspiration (K_c) and based on transpiration (K_cb) were 0.91 and 0.73, respectively. The single layer K_c was fitted with a degree days function. Twenty percent of evapotranspiration originated from direct soil evaporation. The evaporative fraction was 0.83 on average. The average relative water supply was 1.1, revealing that, in general, irrigation water supply was in good harmony with the crop water requirements. The resulting evapotranspiration deficit was 73–95 mm per season only. The mean aerodynamic resistance (r_a) was 37 s m⁻¹ and the bulk surface resistance (r_s) was 135 s m⁻¹. The mean unit yield was 45 tonne ha⁻¹ being equivalent to a crop water productivity of 3.2 kg m⁻³ when based on E_a with an economic counterpart of US$ 3.27 m⁻³. The drawback of this highly productive use of water resources is an unavoidable percolation flux of approximately 300 mm per growing season that is detrimental to the downstream environment and water users.     

Visible-Light-Driven Photocatalytic N-Doped TiO<Subscript>2</Subscript> for Degradation of Bisphenol A (BPA) and Reactive Black 5 (RB5) Dye

Bisphenol A (BPA) and reactive black 5 (RB5) dye are among the most persistent and non-biodegradable contaminants in water which require an urgent need for the development of effective removal method. The ubiquitous existence of both contaminants could interfere with the human health and aquatic environmental balance. Photocatalytic process as one of advanced oxidation processes (AOPs) has shown high performance for degradation of organic compounds to the harmless materials under sensible condition. Therefore, this study aims to develop a visible-light-driven photocatalyst that can efficiently degrade BPA and RB5 present in household water. N-doped TiO₂ were successfully synthesized via simple and direct sol–gel method. The prepared TiO₂ nanoparticles were characterized by field emission scanning microscope (FE-SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and Brunauere Emmette Teller (BET) analysis. The incorporation of nitrogen in TiO₂ lattice exhibited excellent optical responses to visible region as revealed by UV–Vis–NIR spectroscopy absorption capability at 400–600 nm. The photocatalytic activity of the N-doped TiO₂ nanoparticles was measured by photocatalytic degradation of BPA and RB5 in an aqueous solution under visible-light irradiations. Degradation of BPA and RB5 was 91.3% and 89.1%, respectively after 360 min illumination. The degradation of BPA and RB5 by N-doped TiO₂ was increased up to 89.8% and 88.4%, respectively under visible-light irradiation as compared to commercial TiO₂ P25. This finding clearly shows that N-doped TiO₂ exhibits excellent photocatalytic degradation of BPA and RB5 under visible irradiation, hence have a promising potential in removing various recalcitrant contaminants for water treatment to fulfill the public need to consume clean water.

Open image in new window

Graphical Abstract ?

     

Effect of Fruiting Branch/Square Removal on Growth and Quality of Bt Cotton under Different Potassium Rates

Removal of early fruiting branches with greater potassium doses caused more source and no sink at early stages of growth, leading to improved yield, yield components, and fiber quality traits in Bt cotton. The study used manual alteration of plant architecture (F₁, no branch removal; F₂, removal of first fruiting branch; F₃, removal of first and second fruiting branches; F₄, removal of all squares from first fruiting branch; F₅, removal of all squares from first and second fruiting branches) and potassium rates (50, 100, and 150 kg ha^?1) in a randomized complete block design and was repeated for 2 years (2011 and 2012). Increasing potassium application increased total bolls per plant and cotton yield to the greatest levels in F₃ and F₅, against lowest level in the control. Ginning out turn, fiber length, seed oil, and seed protein content were influenced by fruiting branch or square removal but the difference was less. Increasing potassium improved seed and fiber quality.     

Study the Effects of Siderophore-Producing Bacteria on Zinc and Phosphorous Nutrition of Canola and Maize Plants

Plant growth-promoting rhizobacteria (PGPR) are soil bacteria that are able to colonize rhizosphere and to enhance plant growth by means of a wide variety of mechanisms. In the present study, Myristica yunnanensis and Stenotrophomonas chelatiphaga strains were recognized as new records in Iran flora. According to the results, these strains significantly affected plants’ zinc and phosphorous contents which could be due to the production of phytosiderophore. Siderophore-producing bacteria increased canola zinc (Zn) content as strategy-I plant, while in maize, it can be said that probably the effect of phytosiderophore produced by plant on increasing root and shoot Zn content was more than siderophore produced by bacteria. These isolates could be used as bio-input for improving the plant productivity as a substitute to chemical fertilizers and also to correct the nutrient deficiencies in canola and maize for sustainable agriculture.     

Development of Empirical Formulae to Determine Emission Rate from Various Opencast Coal Mining Operations

All major mining activities, particularly opencast coal mining,directly or indirectly contribute to the problem of air pollution.Therefore, air quality assessment and prediction arerequired to prevent and minimize the air quality deteriorationdue to various opencast coal mining operations. Determination ofemission rates for these activities is the first and foremostconcern. In view of the above, this study was undertaken to determinate emission rates and to develop empericalformulae to calculate emission rates of various opencast coalmining activities.To achieve the objectives, seven coal mining sites were selectedto generate site-specific emission data by considering miningpractices, method of working, geographical location,accessibility and above all resourceavailability. The study covers various mining activities andlocations including drilling, overburden loading and unloading,coal loading and unloading, the coal handling plant, the exposedoverburden dump, the stock yard, the workshop, the exposed pit surface roadsand haul roads.Based on the study, a set of twelve emperical formulae have beendeveloped for calculation of suspended particulate matter (SPM)emission rates from various opencast coal mining activities. Theemission of gaseous pollutants (sulphur dioxide and nitrogenoxide) has been found negligible for various mining activities.Therefore, observation for gaseous pollutants has been consideredfor overall mine activities and empirical formulae have subsequently beendeveloped.The developed empirical formulae were calculatedby a field study at another coal mine. The measured andcalculated values of emission rate were compared for eachactivity. Average correlation between the measured andcalculated values for different activities was estimated to be 85.6–99.9%, which indicates fairly good accuracy.Validation of the study was also carried out by means of thefugitive dust model (FDM) using the calculated emissionrate data from the empirical formulae for each mining activity of amine, meteorological data and other details as input.The average accuracy between measured and predictedvalues of concentration of SPM at certain receptor locations wasfound to be 79%. A user-friendly emission software called`EmissCalc' was developed to calculate emission rate, whichcan be used as input for different air quality models.     

Nippon Dojohiryogaku Zasshi

Usually, immobilization and release of nitrogen in soil are going on continuously and concurrently, whereby the nitrogen of the decomposing system is transformed steadily from inorganic to organic state by immobilization and back from organic to inorganic state by decay and mineralization. The driving agents of this turnover are soil microorganisms, C/N ratio, temperature, moisture, pH etc., and the energy needed to keep this cycle running derives from decomposable organic compounds added to soil in the forms of plant residues and excretions of roots and stored in the form of soil organic matter.     

WATER STRESS AND NITROGEN MANAGEMENT EFFECTS ON GAS EXCHANGE,WATER RELATIONS,AND WATER USE EFFICIENCY IN WHEAT

A field experiment was conducted over two years to evaluate the gas exchange, water relations, and water use efficiency (WUE) of wheat under different water stress and nitrogen management practices at Crop Physiology Research Area, University of Agriculture, Faisalabad, Pakistan. Four irrigation regimes and four nitrogen levels, i.e., 0, 50, 100, and 150 kg N ha^?1 were applied in this study. The photosynthetic gas exchange parameters [net carbon dioxide (CO₂) assimilation rate, transpiration rate and stomatal conductance] are remarkably improved by water application and nitrogen (N) nutrition. Plants grown under four irrigation treatments as compared with those grown under one irrigation treatment average stomatal conductance increased from 0.15 to 0.46 μ mol m^?2s^?1mol during 2002–2003 and 0.18 to 0.33 μ mol m^?2s^?1mol during the year 2003–2004 and photosynthetic rate from 9.33 to 13.03 μmol CO₂ m^?2 s^?1 and 3.99 to 7.75 μmol CO₂ m^?2 s^?1 during the year 2002–2003 and 2003–2004, respectively. The exposure of plants to water and nitrogen stress lead to noticeable decrease in leaf water potential, osmotic potential and relative water content. Relative water content (RWC) of stressed plants dropped from 98 to 75% with the decrease in number of irrigation and nitrogen nutrition. The higher leaf water potential, and relative water contents were associated with higher photosynthetic rate. Water use efficiency (WUE) reduced with increasing number of irrigations and increased with increasing applied nitrogen at all irrigation levels.     

Impact of Seasonal Fluctuations on the Sediment-Mercury, its Accumulation and Partitioning in Halimione portulacoides and Juncus maritimus Collected from Ria de Aveiro Coastal Lagoon (Portugal)

The availability of metals to plants is a complex function of numerous environmental factors. Many of these factors are interrelated, and vary seasonally and temporally. The current study intended to understand the influence of seasonal fluctuations and the vegetation of salt marsh plants (SMPs; Halimione portulacoides, Juncus maritimus) on sediment??s mercury (Hg) and its pH and redox potential (Eh), as well as their cumulative effect on the plant??s Hg-accumulation and Hg-partitioning potential. The area selected for the study was Laranjo Basin at Ria de Aveiro lagoon (Portugal) where a known Hg gradient was existed due to chlor-alkali plant discharge. Three sampling sites (L1, L2 and L3) were selected along a transect defined by the distance from the main Hg source. Samples were also collected from the Hg-free site (R). Irrespective of the plant vegetation, Hg in sediments gradually increased with a decreasing distance towards Hg-point source. The sediment colonised by J. maritimus showed more Hg concentration compared with H. portulacoides irrespective of the season. As a whole, J. maritimus accumulated Hg more than H. portulacoides at all the sampling sites, whereas in root, stem and leaf, the concentration was ranked as: L1 > L2 > L3 in both the plant species and was differentially influenced by seasonal changes. Moreover, root of both plants exhibited highest Hg concentration compared with stem and leaf. In addition, the leaf of H. portulacoides exhibited more Hg than leaves of J. maritimus. Bioaccumulation and translocation factors and dry weight were differentially influenced by seasonal changes. Taking together the results, the physico-chemical properties of sediment especially the sediment-Eh seems to be influnced by the type of plant vegetation and seasonal changes which in turn may have influenced the chemistry of sediments; thus, it enfluences the bioavalability of Hg and the Hg-retention capacity of both salt marsh sediments (SMSs) and SMPs (bioaccumulation factor). Moreover, SMSs vegetated by J. maritimus exhibited a stronger capacity for the retention and phytostabilization of Hg belowground (in sediments and/or roots) than those dominated by H. portulacoides. Conversely, those SMSs extensively vegetated by H. portulacoides are expected to translocate more Hg to aboveground parts, acting as a potential source of this metal to the marsh ecosystem. Therefore, J. maritimus and H. portulacoides may be used repectively for phytostabilization (in rhizosediments) and phytoextraction (by accumulation in aboveground plant tissue for subsequent plant removal).     

Elevated CO2 Improves Growth and Phosphorus Utilization Efficiency in Cereal Species Under Sub-Optimal Phosphorus Supply

Cultivars of Triticum aestivum, T. durum, and Secale cereale were grown at low (2 μM) and sufficient (500 μM) phosphorus (P) under ambient carbon dioxide (380 μmol mol^?1; aCO₂) and elevated CO₂ (700 μmol mol^?1, eCO₂) to study responses of cereal species in terms of growth and P utilization efficiency (PUE) under P x CO₂ interaction. Dry matter accumulation increased under eCO₂ with sufficient P. Nevertheless, dry matter accumulated at eCO₂ with low-P was similar to that obtained at aCO₂ with sufficient P. Leaf area was 43% higher under eCO₂ with sufficient P. Significant increase in lateral root density, length and surface area were noted at low-P under eCO₂. Phosphorus use efficience (PUE) increased by 59% in response to eCO_2­ in low-P plants. Thus, eCO₂ can partly compensate effect of low-P supply because of improved utilization efficiency. Among cereals, durum wheat was more suitable in terms of PUE under high CO₂ and limiting P supply.