Use of marine yeasts as an available diet for mass cultures of Moina macrocopa

A 4‐week feeding trial was conducted to test the use of marine yeasts purified from seawater and sediments as a dietary source in cultivating a cladoceran, Moina macrocopa, a potential alternative live food for fish larvae. Optimal growth conditions of two yeast strains were obtained for NaCl concentration, pH and temperature. Moina macrocopa was cultivated using different diets: marine yeasts (Debaryomyces hansenii Yeast‐14 and Candida austromarina Yeast‐16) and a commercial diet (Erythrobacter sp. Sπ‐I). The essential amino acids of both the yeast strains were nearly as great as those in M. microcopa. Further, the yeast‐fed M. macrocopa had essential amino acid profiles similar to the documented values for rotifers and Artemia enriched in microalgae and commercial diets. Erythrobacter sp. Sπ‐I lacked n‐3 polyunsaturated fatty acids, 20:5n‐3 and 22:6n‐3, which were also low but detected in both yeasts. An increase in the 20:5n‐3 [eicosapentaenoic acid (EPA)] and 22:6n‐3 [docosahexaenoic acid (DHA)] levels, compared with the levels in yeast strains themselves, was more pronounced in the 22:6n‐3 level of Moina fed the C. austromarina, resulting in a high DHA:EPA ratio. When the Moina diets were switched, their δ¹³C values shifted gradually towards the values of the switched diets. Diet switch from Erythrobacter sp. Sπ‐I to C. austromarina Yeast‐16 resulted in a more rapid turnover of Moina tissue carbon than that in the inverse case. When fed a mixed diet, the δ¹³C values of Moina tissue approached the value of marine yeasts immediately. These temporal changes in the δ¹³C values of Moina tissue indicate the preferential ingestion of marine yeasts and a selective assimilation of the carbon originated from marine yeasts. These findings suggest that marine yeasts, particularly C. austromarina Yeast‐16, are highly available to mass cultures of M. macrocopa, providing better nutritional and dietary values than the commercial diet (Erythrobacter sp. Sπ‐I).     

Effects of diet and sediment type on survival, growth and moulting of juvenile tiger crab, Orithyia sinica L.

This study investigated the effects of different types of diet and sediment on the growth parameters of juvenile tiger crab Orithyia sinica under laboratory conditions, focusing on survival, growth and moulting. In the first set of experiments, juvenile tiger crabs were reared with five different types of sediment, i.e., soft sand, coarse sand, soft sand mixed with coarse sand, mud or bare bottom. Soft sand resulted in not only the highest survival rate of 78% but also the best rate of growth and feed intake. Crabs reared with a mud substrate showed the worst results in these parameters. The intermoult period, however, was not affected by sediment types. In the second set of experiments, crabs were fed different types of diet to determine their effects on the same growth parameters. Diets were composed of different combinations with Manila clam (Ruditapes philippinarum), brine shrimp (Artemia nauplii), microencapsulated feeds and marine diatom (Chaetoceros gracilis). Survival and growth in crabs fed Manila clam as a diet component were significantly higher than in those on other diets. The highest survival and growth were achieved with a diet that included all four components. These results provide valuable information on the appropriate bottom substrates and diet types necessary for artificial mass culture of the tiger crab.     

One-step continuous coating of silver nanoparticles on well aligned fibers of PAI/PTACM

Highly aligned ultrafine fibers of Poly (amide-co-imide) PAI (torlon)/Poly (trimellitic anhydride chloride-co-4, 4′-methylene dianiline) (PTACM) blends have been prepared by using mechano-electrospinning. Employing a mixed solvent system of DMSO and THF alongwith water coagulation bath as a medium, continuous fibers with improved mechanical properties have been obtained. The continuity of the fibers is strongly dependent on the solvent mixing ratio of DMSO and THF (6:4). Continuous fibers with the most uniform diameter are obtained when a 30 % of PAI and PTACM (1:1) resins by weight is used in the blending solution. The aligned fibers are further coated with silver nanoparticles using a one-step process by passing the electrospunned fibers through PEG solution and a silver precursor solution followed by reduction in a continuous process. The advantage of our method lies in a uniform silver coating on a single fiber that can be coated continuously on a larger length scale (～Km). The mechanical properties of these fibers are dramatically improved after their alignment. Better electrical conductivity is obtained for these fibers after they are coated with silver nanoparticles. The highly aligned silver decorated fibers utilizes a novel electroless continuous process using Polyethylene glycol (PEG), which shows good binding properties and can be used for various bio and electronic applications.     

The eco-friendly surface modification of textiles for deep digital textile printing by in-line atmospheric non-thermal plasma treatment

This study evaluated the potential application of an atmospheric plasma (AP) treatment as a pre-treatment for digital textile printing (DTP) of polyester (PET) fabrics and cotton, in order to determine its viability as an alternative to the usual chemical treatment. The surface properties of the AP-treated fabrics were examined through scanning electron microscopy (SEM) and contact angle, and the physical properties, such as electrostatic voltage and water absorbance, were tested. The properties of cotton and PET with the AP treatment were found to be dependent on number of repetitions and electric voltage. Although no remarkable surface differences were observed by SEM in the fabrics before and after treatment, the static contact angle of the PET after AP treatment was decreased from 85 ° to 24 ° at wave. In addition, the charge decay time decreased as the voltage and number of treatments increased. The absorption height of PET changed after exposure to 7 mm with increasing measurement time. The K/S with and without the AP pre-treated and DTP finished cotton was better than that with the usual chemical modification. In PET, the 0.5 kW and 1 time AP-treated specimen showed the highest K/S values.     

Thermal and mechanical properties of modified CaCO3 filled poly (ethylene terephthalate) nanocomposites

Poly(ethylene terephthalate) (PET)/CaCO₃ and PET/modified-CaCO₃ (m-CaCO₃) nanocomposites were prepared by melt blending. The morphology indicated that m-CaCO₃ produced by reacting sodium oxalate and calcium chloride, was well dispersed in PET matrix and showed good interfacial interaction with PET compared to CaCO₃. No significant differences in the thermal properties such as, glass transition, melting and degradation temperatures, of the nanocomposites were observed. The thermal shrinkage of PET at 120 °C was 10.8 %, while those of PET/CaCO₃ and PET/m-CaCO₃ nanocomposites were 2.9–5.2 % and 1.2–2.8 %, respectively depending on filler content. The tensile strength of PET/CaCO₃ nanocomposite decreased with CaCO₃ loading, whereas that of PET/m-CaCO₃ nanocomposites at 0.5 wt% loading showed a 17 % improvement as compared to neat PET. The storage modulus at 120 °C increased from 1660 MPa for PET to 2350 MPa for PET/CaCO₃ nanocomposite at 3 wt% loading, and 3230 MPa for PET/m-CaCO₃ nanocomposite at 1 wt% loading.     

SWAT modeling of best management practices for Chungju dam watershed in South Korea under future climate change scenarios

Suitable and practicable best management practices (BMPs) need to be developed due to steadily increasing agricultural land development, intensified fertilization practices, and increased soil erosion and pollutant loads from cultivated areas. The soil and water assessment tool model was used to evaluate the present and future proper BMP scenarios for Chungju dam watershed (6,642 km²) of South Korea, which includes rice paddy and upland crop areas. The present (1981–2010) and future (2040s and 2080s) BMPs of streambank stabilization, building recharge structures, conservation tillage, and terrace and contour farming were examined individually in terms of reducing nonpoint source pollution loads by applying MIROC3.2 HiRes A1B and B1 scenarios. Streambank stabilization achieved the highest reductions in sediment and T-N, and slope terracing was a highly effective BMP for sediment and T-P removal in both present and future climate conditions.     

Evaluation of MODIS NDVI and LST for indicating soil moisture of forest areas based on SWAT modeling

This study examined the capability of remotely sensed information gained using the terra moderate resolution imaging spectroradiometer (MODIS) normalized difference vegetation index (NDVI) and land surface temperature (LST) to explain forest soil moisture. The soil and water assessment tool (SWAT) was used for the analysis. Nine years (2000–2008) of monthly MODIS NDVI and LST data from a 2,694.4 km² watershed consisting of forest-dominant areas in South Korea were compared with SWAT simulated soil moisture. Before the analysis, the SWAT model was calibrated and verified using 9 years of daily streamflow at three gauging stations and 6 years (2003–2008) of daily measured soil moisture at three locations within the watershed. The average Nash–Sutcliffe model efficiency during the streamflow calibration and validation was 0.72 and 0.70, respectively. The SWAT soil moisture showed a higher correlation with MODIS LST during the forest leaf growing period (March–June) and with MODIS NDVI during the leaf falling period (September–December). Low correlation was observed in the year of frequent rains, regardless of the leaf periods.     

Glycol Chitosan-Based Fluorescent Theranostic Nanoagents for Cancer Therapy

Theranostics is an integrated nanosystem that combines therapeutics with diagnostics in attempt to develop new personalized treatments with enhanced therapeutic efficacy and safety. As a promising therapeutic paradigm with cutting-edge technologies, theranostic agents are able to simultaneously deliver therapeutic drugs and diagnostic imaging agents and also monitor the response to therapy. Polymeric nanosystems have been intensively explored for biomedical applications to diagnose and treat various cancers. In recent years, glycol chitosan-based nanoagents have been developed as dual-purpose materials for simultaneous diagnosis and therapy. They have shown great potential in cancer therapies, such as chemotherapeutics and nucleic acid and photodynamic therapies. In this review, we summarize the recent progress and potential applications of glycol chitosan-based fluorescent theranostic nanoagents for cancer treatments and discuss their possible underlying mechanisms.     

Simple and Rapid Quality Control of Sulfated Glycans by a Fluorescence Sensor Assay—Exemplarily Developed for the Sulfated Polysaccharides from Red Algae Delesseria sanguinea

Sulfated polysaccharides (SP) from algae are of great interest due to their manifold biological activities. Obstacles to commercial (especially medical) application include considerable variability and complex chemical composition making the analysis and the quality control challenging. The aim of this study was to evaluate a simple microplate assay for screening the quality of SP. It is based on the fluorescence intensity (FI) increase of the sensor molecule Polymer-H by SP and was originally developed for direct quantification of SP. Exemplarily, 65 SP batches isolated from the red alga Delesseria sanguinea (D.s.-SP) and several other algae polysaccharides were investigated. Their FI increase in the Polymer-H assay was compared with other analytical parameters. By testing just one concentration of a D.s.-SP sample, quality deviations from the reference D.s.-SP and thus both batch-to-batch variability and stability can be detected. Further, structurally distinct SP showed to differ in their concentration-dependent FI profiles. By using corresponding reference compounds, the Polymer-H assay is therefore applicable as identification assay with high negative predictability. In conclusion, the Polymer-H assay showed to represent not only a simple method for quantification, but also for characterization identification and differentiation of SP of marine origin.     

Bioproduction of Chitooligosaccharides: Present and Perspectives

Chitin and chitosan oligosaccharides (COS) have been traditionally obtained by chemical digestion with strong acids. In light of the difficulties associated with these traditional production processes, environmentally compatible and reproducible production alternatives are desirable. Unlike chemical digestion, biodegradation of chitin and chitosan by enzymes or microorganisms does not require the use of toxic chemicals or excessive amounts of wastewater. Enzyme preparations with chitinase, chitosanase, and lysozymeare primarily used to hydrolyze chitin and chitosan. Commercial preparations of cellulase, protease, lipase, and pepsin provide another opportunity for oligosaccharide production. In addition to their hydrolytic activities, the transglycosylation activity of chitinolytic enzymes might be exploited for the synthesis of desired chitin oligomers and their derivatives. Chitin deacetylase is also potentially useful for the preparation of oligosaccharides. Recently, direct production of oligosaccharides from chitin and crab shells by a combination of mechanochemical grinding and enzymatic hydrolysis has been reported. Together with these, other emerging technologies such as direct degradation of chitin from crustacean shells and microbial cell walls, enzymatic synthesis of COS from small building blocks, and protein engineering technology for chitin-related enzymes have been discussed as the most significant challenge for industrial application.