Evidence for ozone formation in human atherosclerotic arteries

Here, we report evidence for the production of ozone in human disease. Signature products unique to cholesterol ozonolysis are present within atherosclerotic tissue at the time of carotid endarterectomy, suggesting that ozone production occurred during lesion development. Furthermore, advanced atherosclerotic plaques generate ozone when the leukocytes within the diseased arteries are activated in vitro. The steroids produced by cholesterol ozonolysis cause effects that are thought to be critical to the pathogenesis of atherosclerosis, including cytotoxicity, lipid-loading in macrophages, and deformation of the apolipoprotein B-100 secondary structure. We propose the trivial designation "atheronals" for this previously unrecognized class of steroids.     

Comparison of cardiac output determined by arterial pulse pressure waveform analysis method (FloTrac/Vigileo) versus lithium dilution method in anesthetized dogs

Objective – To compare the determination of cardiac output (CO) via arterial pulse pressure waveform analysis (FloTrac/Vigileo) versus lithium dilution method. Design – Prospective study. Setting – University teaching hospital. Animals – Six adult dogs. Interventions – Dogs were instrumented for CO determinations using lithium dilution (LiDCO) and FloTrac/Vigileo methods. Direct blood pressure, heart rate, arterial blood gases, and end‐tidal isoflurane (ETIso) and CO₂ concentrations were measured throughout the study while CO was manipulated with different depth of anesthesia and rapid administration of isotonic crystalloids at 60 mL/kg/h. Measurements and Main Results – Baseline CO measurements were obtained at 1.3% ETIso and were lowered by 3% ETIso. Measurements were obtained in duplicate or triplicate with LiDCO and averaged for comparison with corresponding values measured continuously with the FloTrac/Vigileo method. For 30 comparisons between methods, a mean bias of ?100 mL/kg/min and 95% limits of agreement between ?311 and +112 mL/kg/min (212 mL/kg/min) was determined. The mean (mL/kg/min) of the differences of LiDCO?Vigileo=62.0402+?0.8383 × Vigileo, and the correlation coefficient (r) between the 2 methods 0.70 for all CO determinations. The repeatability coefficients for the individual LiDCO and FloTrac/Vigileo methods were 187 and 400 mL/kg/min, respectively. Mean LiDCO and FloTrac/Vigileo values from all measurements were 145 ± 68 mL/kg/min (range, 64–354) and 244 ± 144 mL/kg/min (range, 89–624), respectively. The overall mean relative error was 48 ± 14%. Conclusion – The FloTrac/Vigileo overestimated CO values compared with LiDCO and the relative error was high, which makes this method unreliable for use in dogs.     

The umbric epipedon in the N Apennines,Italy—an example from the Vallombrosa Forest

The umbric epipedon is a diagnostic surface horizon recognized by both the World Reference Base for Soil Resources and the U.S. Soil Taxonomy. It is mainly characterized by a dark color, a moderate to high content of OM, and a base saturation of less than 50%. In the N Apennines, Central Italy, forest soils over 600–700 m a.s.l. often have this epipedon. This paper stresses the morphological, chemical, and biological properties of the epipedon, specifically in the Vallombrosa Forest, where considerable work has been done in the last decade. Here, the umbric epipedon forms on sandstone, in high forests of Abies alba, Fagus sylvatica, and Castanea sativa. It does not have homogeneous properties throughout its thickness and often is divided into two distinct genetic horizons, A1 and A2. The A1 horizon is thinner, darker, and richer in OM, more base‐saturated, and biologically more active than the underlying A2 horizon. The mean residence time of the bulk OM amounts to about a century in the A1 horizon, versus half a millennium in the A2. In both A1 and A2 horizons, the non‐humic fraction prevails in the OM; this could account for the high susceptibility of the umbric epipedon to degrade when the forest is clear‐cut or undergoes extensive uprooting due to windstorms or heavy snow loads. Significant discrepancies between the two A horizons have been found in regard to the microbial community. Umbric epipedons which developed under different tree species show minor differences, mainly concerning the microbial community.     

Chemical characterization and biological effects of Sicilian Opuntia ficus indica (L.) mill. Fruit juice: antioxidant and antiulcerogenic activity

The juice of whole fruits of Sicilian cultivars of prickly pear (Opuntia ficus indica (L.) Mill.) was investigated, and the contents of ascorbic acid, total polyphenols, and flavonoids were determined. In the juice, ferulic acid was the chief derivative of hydroxycinnamic acid and the mean concentration of total phenolic compounds was 746 microg/mL. The flavonoid fraction, analyzed by high-performance liquid chromatography-diode array detection, consisted of rutin and isorhamnetin derivatives. The juice showed antioxidant activity in the DPPH(*) test, probably due to the phenolic compounds that are effective radical scavengers. The preventive administration of the juice inhibited the ulcerogenic activity of ethanol in rat. Light microscopy observations showed an increase in mucus production and the restoration of the normal mucosal architecture. The juice is nutritionally interesting, and its dietary intake could provide protection against oxidative damage.     

Derivative potentiometric stripping analysis (dPSA) used for the determination of cadmium,copper, lead,and zinc in Sicilian olive oils

Derivative potentiometric stripping analysis (dPSA) was utilized to evaluate the Cd(II), Cu(II), Pb(II), and Zn(II) content in olive oil samples produced in Sicily in the crop year 2000-2001. The repeatability of the method was attested at 86.36% for cadmium, at 94.94% for copper, at 99.00% for lead, and at 98.92% for zinc. Recovery tests were carried out, both on cleanup procedures and on extraction steps, on olive oil spiked at different levels; obtained recoveries were 84.52 +/- 9.86 for cadmium, 97.34 +/- 2.72 for copper, 100.68 +/- 0.67 for lead and 83.35 +/- 1.72 for zinc. Theoretic detection limits were 1.2 ng g(-1) for Cd, 3.6 ng g(-1) for Cu, 5.9 ng g(-1) for Pb, and 14.3 ng g(-1) for Zn. Found concentrations range were 15.94-58.51 ng g(-1) for Cu, 32.64-156.48 ng g(-1) for Pb, and 157.00-385.22 ng g(-1) for Zn. Copper, lead, and zinc were found in all samples. The main advantage of this determination consists of a not too aggressive metals extraction procedure using hydrochloric acid, which avoids losses of elements typical of sample calcinations methods.     

Determination of selenium in nuts by cathodic stripping potentiometry (CSP)

The aim of this work was to determine the selenium content in nut samples by cathodic stripping potentiometry. Dry-powdered nuts were digested by HNO(3) and dissolved with concentrated hydrochloric acid. To avoid the interference of natural oxygen, the potentiometric determination of selenium was carried out in an electrolyte solution consisting of 2 M CaCl(2) and 4 M HCl. The analysis was executed applying an electrolysis potential of -150 mV for 60 s and a constant current of -30 microA. Under these conditions, detection limits lower than 1.0 ng g(-)(1) were obtained for selenium analysis in nuts. The relative standard deviation of these measurements (expressed as rsd %) ranged from 0.44 to 0.88% while recoveries ranged from 90.2 to 95.3%. The results obtained with the proposed method were compared with those obtained via hydride vapor generation atomic absorption spectroscopy, a common method for determining selenium. The results of the two methods agreed within 5% for almond, hazelnut, and pistachio samples. The mean concentrations of selenium determined in Sicilian samples of almond, hazelnut, and pistachio were 531 +/- 1, 865 +/- 1, and 893 +/- 4 microg/kg, respectively.     

Simultaneous determination of Cd(II), Cu(II), Pb(II), and Zn(II) in citrus essential oils by derivative potentiometric stripping analysis

Citrus essential oils are widely used in the food, cosmetics, and pharmaceutical industries, so the determination of heavy metals content is of great importance to guarantee their quality. The present work deals with the quantification of Cd(II), Cu(II), Pb(II), and Zn(II) in different varieties of citrus essential oils, using derivative potentiometric stripping analysis. Two different metals extraction procedures, involving concentrated hydrochloric acid treatment and acid-alcoholic dissolution, are tested on lemon, mandarin, sweet orange, and bergamot essential oils, and they give very similar results. Cd(II), Cu(II), Pb(II), and Zn(II) recovery tests spanned from 95 to 100.50%, providing evidence that metals quantification remained unaffected by the cleanup steps of the two procedures. The repeatability of the hydrochloric acid extraction method, applied on different varieties of essential oils, is >95.00% for Cd(II), Cu(II), Pb(II), and Zn(II), whereas the repeatability of the acid-alcoholic dissolution method is >93.00% for Cu and Cd only in lemon oil. Detection limits obtained for the four analytes, using both procedures, ranged from 0.10 to 0.98 ng g(-)(1) in lemon, mandarin, sweet orange, and bergamot essential oils.     

Determination of some heavy metals and selenium in Sicilian and Calabrian citrus essential oils using derivative stripping chronopotentiometry

This paper aims to bring some novelty about the concentration of some heavy metals and selenium in biological citrus essential oils (CEO) produced in Sicily and Calabria in different crop years. Derivative stripping chronopotentiometry has been used as an accurate, sensitive, and rapid technique for the determination of Cd, Cu, Mn, Ni, Pb, Zn, and Se in hydrochloric acid extracts of CEO; in the optimized electrochemical conditions, detection limits of <1 microg kg(-1) were obtained for all of the studied metals. In particular, the concentrations of metals were determined in biological bergamot essential oils produced in Calabria in 1999 and 2000 and in biological CEO produced in Sicily in 2003 and 2004. The obtained results provided evidence that Mn was the most abundant metal in all of the studied CEO followed by Zn, Ni, Cu, Pb, and Se; Cd concentrations were always lower than the limit of detection (0.6 microg kg(-1)).     

Prevalence of the polycystic kidney disease and renal and urinary bladder ultrasonographic abnormalities in Persian and Exotic Shorthair cats in Italy

The ultrasonographic findings of kidneys, liver and urinary bladder of 288 Persian and 44 Exotic Shorthair clinically normal cats that underwent screening for polycystic kidney disease (PKD) between July 2003 and December 2005 were reviewed. Cats were divided into two groups, one including cats aged <9 months (group 1) and one cats aged >/=9 months (group 2). Cats were classified as PKD-positive when at least one renal cyst was found. One hundred and thirty-six cats (41.0%) had more than one cyst in at least one kidney. The prevalence of PKD was similar in both groups. Eight PKD-positive cats had cystic livers (5.9%). Other renal abnormalities included a pelvic calculus and a medullary rim sign (MRS). The difference in prevalence of an MRS in group 2 compared to group 1 and the difference between PKD-positive and -negative cats in group 2 were not significant. There was no difference in mean kidney length between PKD-positive and -negative cats in group 2. Urinary bladder anomalies were principally represented by urinary sediment, with prevalence significantly higher in group 2. No difference was detected in group 2 between PKD-positive and -negative cats. In conclusion feline PKD is common in Italy. The ultrasonographic findings of MRS and urinary bladder sediment did not correlate with feline PKD. Urinary bladder sediment is common in Persians and Exotic Shorthairs and more likely in adults.