Regional Contamination of Moravia (South-Eastern Czech Republic): Temporal Shift of Pb and Zn Loading in Fluvial Sediments

Regional contamination by Pb and Zn in southern Moravia (south-east part of the Czech Republic) in the twentieth century was analysed in Brno Dam lake sediments and in floodplain sediments of the Morava River near Strážnice. The age model for the Brno Dam lake sediments has been obtained by ¹³⁷Cs (maxima corresponding to the nuclear tests in atmosphere and the 1986 Chernobyl accident) and the construction of the dam (1940); the time constraints for the Morava River sediments was the erection of flood defences (1930s) and ²¹⁰Pb dating. In the case of floodplain sediments, profiles exhibiting post-depositional mobilisation of heavy metals by pedogenic processes (gleying) must be excluded to reconstruct the history of contamination. There was a relatively fast joint onset of Pb and Zn load since the early stages of industrialisation in the first half of the twentieth century, but then the concentrations of these two metals developed in a different manner. Pb load only slightly increased till its peak in 1960s and 1970s. The increase of Zn load was rather stepwise: Soon before 1930s (Morava River floodplain) and in 1940s and 1950s (in Brno Lake), the relative contamination by Zn was much lower than during its peak in the 1970s to the present days. The offset of Pb and Zn contamination curves could have been caused by three different artificial sources of these heavy metals. The temporal shift of Pb and Zn loads can be used for dating sediments.     

Fumonisin B-glucose reaction products are less toxic when fed to swine

The effects of fumonisin B-glucose reaction products in swine diets was examined. Pigs were fed diets containing 528 micromol of total fumonisin B/kg (FB), 528 micromol of total FB-glucose adducts/kg (FB-G, 122 micromol of unreacted FB/kg), or 0 micromol of total FB/kg for 15 days to test the efficacy of the FB-G reaction products in detoxifying FB. Weight gain in FB pigs was lower than in FB-G or controls, which was correlated with feed intake reduction in FB pigs. Serum aspartate aminotransferase, gamma-glutamyltransferase, and total bilirubin in FB pigs were higher than in FB-G or control pigs. Serum sphinganine/shingosine ratios in FB pigs were higher than in FB-G or control pigs. Microscopic examination of tissues from FB pigs showed generalized liver necrosis and apoptosis with marked cellular pleomorphism and disorganized hepatic cords. The liver and kidneys in the FB-G group appeared to be normal. Tissues of controls were free of lesions. Results suggest that dietary FB-G products are less toxic to swine and may provide an detoxification approach in instances of widespread FB grain contamination (p < 0.05).     

Effects of Vermicompost and Vermiwash on Plant,Phenolic Content,and Anti-oxidant Activity of Mexican Pepperleaf (Piper auritum Kunth) Cultivated in Phosphate Rock Potting Media

The aim of this investigation was to determine the effect of vermicompost, vermiwash, and phosphate rock on plant, total phenols, flavonoids, and anti-oxidant activity in Piper auritum Kunth leaves. P. auritum plants were obtained from cuttings and were planted according to the Box-Behnken experimental design with three repetitions at the central point. The factors and levels were vermicompost (10, 20, and 30 g plant^?1), vermiwash (5, 10, and 15 mL plant^?1), and phosphate rock (1, 2, and 3 g plant^?1). Plant growth parameters (plant height, stem diameter, leaves number) and chlorophyll content were measured 1 month after treatment applications. Total phenols, total flavonoids, and 1,1-diphenyl-2-picryl-hydrazyl radical scavenging activity was measured after 4 months. Vermicompost, vermiwash, and phosphate rock had no statistically significant effect on plant growth. Plant height, stem diameter, leaves number, chlorophyll, innermost number, fresh weight stem, fresh weight leaves, fresh weight root, dry weight stem, dry weight leaves, and dry weight root were not different among treatments. Total phenolic compounds were statistically affected for both vermiwash and phosphoric rock (p < 0.05) and the anti-oxidant activity decreased by vermicompost addition. The application of 15 mL plant^?1 vermiwash, 1 g phosphate rock, and 20 g vermicompost plant^?1 increased the total phenol content.     

Determination of thiamin in cooked sausages

A reliable and rapid high-performance liquid chromatography (HPLC) method has been set up for the determination of total thiamin in difficult sample matrices such as cooked sausages. Different hydrolysis conditions and enzymes were tested to release the vitamin from its phosphate ester. The best data in the enzymatic digestion were obtained by incubating the samples with 6% clara-diastase at 50 degrees C for 3 h. After oxidation of thiamin to thiochrome, the sample extracts were purified by using a C(18) Sep-Pak cartridge. Final determination was performed by reversed-phase HPLC with fluorescence detector (excitation 360 nm, emission 430 nm), on a low-cost 25 cm x 4 mm i.d. Spherisorb C(8) cartridge using a mixture of 5 mM phosphate buffer pH 7.0 and acetonitrile (70:30, v/v) as mobile phase. Precision of the method was 1.5% (within a day) and 5. 2% (between days). The detection limit was 0.015 mg/100 g. All the recoveries from the different cooked sausages were better than 90% of thiamin hydrochloride added to samples of meats. In the samples analyzed, the mean value for thiamin was between 0.039 and 0.508 mg/100 g fresh weight.     

Gene flow in common bean (Phaseolus vulgaris L.)

This study was conducted in Brazil in order to assess the potential risk posed by gene escape from transgenic into non-transgenic plants and wild populations. A new methodology was applied to evaluate the gene flow between common bean cultivars, by means of a specially delineated experiment in two stages. The first stage consisted of the planting of one cultivar with violet flowers (BB) as pollen source (‘Diamante Negro’), and a receiver (‘Talismã’) with white flowers (bb), at different distances. The source was sown in the center of the area. The pollen receiver cultivar was sown, in concentrical squares around it. At maturity, the rows were sampled at varied distances from the source in the four cardinal directions. In the second stage, the sampled seeds of the previous stage were sown, and the percentage of outcrossing was evaluated during flowering through the presence of violet flowers (Bb). The highest frequency of natural hybrids, 0.136%, occurred at a distance of 0.5 m between the cultivars. The natural outcrossing rate was practically zero beyond a distance of 3.25 m.     

Identification of marker alleles linked to fire blight resistance QTLs in apple genotypes

Molecular marker analysis can be an effective tool when searching for new fire blight resistance donors. It can speed up the breeding process as well, even though many of the available markers linked to fire blight resistance QTLs have not yet been tested by screening a large number of cultivars. The aim of this study was to search for alternate sources of the three major QTLs of fire blight resistance; FBF7, FB_MR5 and FB_E, as well as to test the efficiency of some markers linked to minor QTLs. Altogether, nine primer pairs were used on 77 genotypes including new Hungarian cultivars and old apple cultivars from the Carpathian basin. Several marker alleles of FB resistance QTLs have been detected in the screened genotypes, most importantly the alleles coupling with FB_MR5 in the old cultivars ‘Kéresi muskotály’, ‘Szabadkai szercsika’ and ‘Batul’. We propose these cultivars as the first available resistance donors of FB_MR5 instead of the crabapple Malus × robusta 5. The results also bring new information regarding the resistance alleles of new Hungarian cultivars and selections.     

Retrospect on in vitro androgenesis of sorghum (Sorghum bicolor)

Development of sorghum hybrids can immensely benefit from an enhanced anther culture protocol since the resultant doubled haploids would accelerate, as in other major cereal crops, the attainment of homozygosity and fixation of alleles. Production of the hybrids that have got high yielding, stress tolerance and other traits of industrial significance in a shorter time as compared to the current trend can hence be realized. This review presents the advances that have been made in the development of such a protocol, with closer attention to androgenic induction components of pre-treatment, culture media composition and conditions as well as ploidy determination and eventual chromosome doubling. From the findings of this review, it is clear that further work is desired to ensure a protocol, that to a large degree, breaks the genotype dependency trend that has been widely cited to impede the usability of the tested protocols.     

Effects of various densities of Ophiostoma ips inoculations on Pinus sylvestris in north‐western Spain

The aim was to determine the inoculation density above which Scots pine (Pinus sylvestris) is overcome by the blue‐stain fungus Ophiostoma ips that is associated with the bark beetle Ips sexdentatus. In north‐western Spain, stems of 16 Scots pines were inoculated at various densities (0, 400, 800 or 1600 inoculi/m²) along circumferential 100 or 150 cm wide inoculation belts. Each inoculum consisted of a 5 mm diameter cylinder of malt extract agar colonized by the fungus. Three months later, all trees were harvested and trunk resinosis and foliage colour were visually assessed. The percentage of healthy, desiccated, resin soaked, and blue‐stained sapwood, as well as growth productivity indices, were calculated from stem disks cut from within the inoculated zone of each tree. Sapwood‐specific hydraulic conductivity (Ks) of each tree was measured in the middle of the inoculated zone. All parameters of tree vigour changed dramatically to the worse when inoculation densities were above 400 inoculi/m², and foliage changed from green to yellow‐green or yellow when an inoculation density of 800 instead of 400 was used. The percentage loss of sapwood‐specific conductivity (PLC) increased from 30 to 90% and the percentage of healthy, conductive sapwood dropped from 85 to 35% at 800 inoculi/m². No effect of the width of the inoculation belt was observed, and there was no relationship between tree productivity indices and the level of resistance. A non‐linear negative relationship was found between PLC and the percentage of healthy sapwood. It is concluded that tree resistance was overcome and that trees were going to die when the inoculation density was ≥800 inoculi/m².