Physiological and Mineralogical Properties of Arsenic-Induced Chlorosis in Barley Seedlings Grown Hydroponically

The experiment was carried out to investigate the effects of arsenic (As) on the physiological and mineralogical properties of barley (Hordeum vulgare L. cv. ‘Minorimugi’). The plants were grown in nutrient solution treated with 0, 6.7, 33.5, and 67 μ M As (0, 0.5, 2.5, and 5 ppm As, respectively) in the phytotron. Dry matter yield of shoots and roots decreased significantly with the As treatments, indicating that barley plants are As-sensitive and As-toxicity depends on the As concentration in the rooting medium. Necrosis in older leaves and chlorosis symptoms (whitish color) in the fully developed young leaves were observed at the 33.5 and 67 μ M As treatments. Arsenic concentration, accumulation, and translocation increased with the increase of As concentration in the rooting medium. Arsenic was mostly concentrated in roots and a little amount was moved to shoots, indicating that As was not easily translocated to shoots of barley seedlings. Concentrations and accumulations of phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), manganese (Mn), zinc (Zn), and copper (Cu) decreased significantly in shoots for 33.5 and 67 μ M As treatments as compared to the 0 μ M As treatment. Concentrations of P, K, Ca, Mg, Mn, and Cu decreased in roots, but Zn concentration increased in roots at 67 μ M As treatment. Accumulations of P, K, Ca, Mg, Mn, Zn, and Cu in roots also decreased significantly at 67 μ M As treatment. Accumulation of P and the cations showed negative relationship with As. Concentration of Fe decreased in shoots at 33.5 and 67 μ M As treatments where chlorosis was induced in the young leaf but increased in roots at 33.5 and 67 μ M As treatments. It was suggested that As might induce iron (Fe)-chlorosis in the plants. Among the micronutrients, Fe translocation was more affected than others by As. Phytosiderophore (PS) accumulation in roots, which is a symptom of Fe-deficiency in grasses, did not change significantly between 0 and 33.5 μ M As treatments; indicating that As-induced chlorosis did not enhance PS accumulation in roots and decreased due to As-toxicity at 67 μ M As treatment.     

Lactoferrin concentrations in milk from normal and subclinical mastitic cows

The concentrations of lactoferrin (Lf) in quarter milk from normal lactating cows and subclinical mastitic cows were measured to determine whether the Lf concentration in milk is influenced by the age of the cow, the stage of lactation, number of milk somatic cells and the presence of pathogens. Lf concentrations in 111 quarter milk samples from 28 normal lactating cows and 270 quarter milk samples from 198 subclinical mastitic cows were measured by means of a single radial immunodiffusion test. Lf concentrations (means +/- standard deviations; logarithmic form) in normal cows and subclinical mastitic cows were 2.23 +/- 0.39 and 2.70 +/- 0.39, respectively. The mean milk Lf concentration (log) in subclinical mastitic cows was significantly (p<0.01) higher than that in normal cows. The mean milk Lf concentration (log) in normal lactating cows aged 5 years was lower than those in normal lactating cows aged 2 years (p<0.01) and 3 years (p<0.05). The results showed that the milk Lf concentration (log) is associated with age of the dairy cow (one-way analysis of variance test, p<0.01). The mean milk Lf concentration (log) in the latter lactational period tended to be higher than those in the peak and middle periods. Milk Lf concentrations (log) tended to be proportional to the level of the somatic cell count (SCC) score. Mean milk Lf concentrations (log) in subclinical mastitic cows infected with Staphylococcus aureus and with other streptococci species were significantly (p<0.01) higher than those in cows infected with coagulase-negative staphylococci and with Corynebacterium bovis.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Simple method for synthesizing phenolicβ-O-4 dilignols

A modified synthetic method for phenolic-O-4 lignin substructure model dimers was developed involving protection of the phenolic hydroxyl group of acetophenons with benzoyl chloride, bromination with 4-dimethylaminopyridiniumbromide perbromide, condensation with phenols in the presence of 18-crown-6-ether, condensation with paraformaldehyde, reduction with NaBH₄ and debenzoylation. This method results in shorter reaction times and increasing yields without the application of strict anhydrous and drastic conditions or chloric solvents. This alternative route could be applied to the-O-4 dilignol syntheses of four combinations of guaiacyl and syringyl derivatives.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.     

Degradation of the urban ecosystem function due to soil sealing: involvement in the heat island phenomenon and hydrologic cycle in the Tokyo metropolitan area

ABSTRACT

We reviewed the role of the soil function of urban green space in mitigating the heat island phenomenon and urban flood damage, which are important issues in the modern urban environment. Urban sprawl has progressed remarkably in the southern part of the Kanto District of Japan, especially since the 1960s. The grassland/bare land area ratio in the center of Tokyo was more than 70% in the 1930s but less than 40% in 1990. On the other hand, the paving area ratio was ~2% in the 1930s but more than 10 times that amount in 1990. Thus, cities, such as Tokyo, in the southern part of the Kanto District have been significantly sealed soil throughout time, and the heat island phenomenon has intensified. Urban green space helps to mitigate the heat island phenomenon based on the water retention and heat dissipation function of plants and unsealed soil. A cool island effect was reported during summer days in urban green spaces in Tokyo. The mitigation of the heat island effect seems to be large, even when conditions, such as the park area, land use, afforestation area ratio, and soil type, differ. Soil sealing and compaction affect urban flooding by hindering the penetration of rainwater and increasing surface runoff. According to a survey in the hilly basin (1 km²) of the western part of Tokyo, the proportion of farm- and forestland decreased due to development. The urban area increased from ~10% in the 1970s to ~60% in the 1980s. As a result, the flood arrival time shortened. Green spaces have a high rainwater permeability. The forest soil structure and presence of O horizons further increase the permeability. By promoting permeability to the underground, it is possible to reduce and delay the water runoff on the land surface. To develop urban green space as green infrastructure, it is necessary to accumulate more information on the current situation and agenda for the future of urban green space.     

Lateral hopping of molecules induced by excitation of internal vibration mode

We demonstrate electron-stimulated migration for carbon monoxide (CO) molecules adsorbed on the Pd(110) surface, which is initiated by the excitation of a high-frequency (HF) vibrational mode (C-O stretching mode) with inelastic tunneling electrons from the tip of scanning tunneling microscopy. The hopping phenomenon, however, cannot be detected for CO/Cu(110), even though the hopping barrier is lower than in the CO/Pd(110) case. A theoretical model, which is based on the anharmonic coupling between low-frequency modes (the hindered-translational mode related to the lateral hopping) and the HF mode combined with electron-hole pair excitation, can explain why the hopping of CO is observed on Pd(110) but not on Cu(110).