实例教学法在建筑电气施工图识图教学中的运用--以人为本，学以致用

文章针对识图教学过程中运用实例教学的重要性进行阐述,并针对实例教学法在建筑电气施工识图教学中的应用加以探讨,以提供理论参考。     

The Fluorescent Characterization and Analysis of Two Brucella Attenuated Vaccine Infecting Mouse Macrophagocyte

The experiment was conducted to discuss the difference of binding time of green fluorescent protein B.melitensis M5 (GFP-M5) and B.abortus S19 (GFP-S19) infecting the mouse macrophagocyte (RAW264.7),lysosome,endoplasmic reticulum and golgi body in the initial stage and compare the binding rate of GFP-M5,GFP-S19 with organelle in different timeline,respectively,by confocal laser scanning microscope (CLSM) and flow cytometry.The result showed that GFP-M5 and GFP-S19 were successfully constructed.The intracellular survival ability of Brucella M5,Brucella S19,GFP-M5 and GFP-S19 were not obvisouly affected after infecting RAW264.7.GFP-M5 and GFP-S19 could enter the macrophagocyte in 30 mins,and in 2 h the Brucella could reach lysosome,endoplasmic reticulum and golgi body.In addition,the binding time for two attenuated vaccine did not show differences in 1,2,3 and 4 h.The content of GFP⁺ cell produced by RAW264.7 infected by GFP-M5 and GFP-S19 did not show significant differences (P>0.05).Therefore,the two strains did not have significant differences in the invasion ability in the initial stage of infecting host cell.     

Analysis on Differential Expression Genes in Porcine Aortic Vascular Endothelial Cells Induced by Apolipoprotein C Ⅲ

The aim of this study was to investigate the differential expression genes induced by ApoCⅢ,and study the function of ApoCⅢ.Porcine aortic vascular endothelial cells were successfully isolated using enzyme digestion,and then screened the differential expression genes induced by ApoCⅢ using the Solexa high-throughput sequencing technology.The results showed 647 differential expression genes,including 390 up-regulated genes and 257 down-regulated genes.The qRT-PCR results verified that the gene expression results from Solexa sequencing data were reliable.GO and Pathway analysis showed that the function of differential expression genes were related to immune response,cell apoptosis and death.These findings suggested that ApoCⅢ affected the physiological function of porcine aortic endothelial cells by the molecular pathways of inflammation,cell adhesion and apoptosis,which provided a theoretical basis for further understanding the molecular mechanisms of atherosclerosis caused by ApoCⅢ.     

去花对菊芋数量学性状的影响

以白皮菊芋为试材,通过对现蕾期菊芋去除1/4花、1/3花、1/2花、全部去除和不去花等5个处理,测定叶片、小花、分枝和块茎数量等相关指标,探讨了去花对菊芋数量学性状的影响规律,为提高菊芋块茎生物产量提供理论依据。结果表明:去花1/3、1/2和全株去花提高了单株菊芋块茎数量,降低单株块茎质量,1/4去花对菊芋单株块茎数量和单个块茎质量影响不显著;去花处理降低了二级分枝和一级分枝的数量;去花处理增加了单株叶片的数量和单片叶片的质量;随着去花数量的增加,单株小花数量呈现"降-升-降"的变化规律,单个小花质量呈现"降-升"的变化趋势。     

亚美马褂木不同生根类型硬枝扦插苗生长研究

以珍珠岩基质中亚美马褂木硬枝扦插苗为研究对象,研究了扦插苗生根类型、不定根数、不定根长、苗高、基径、鲜样质量和根芽距等生长指标,为选择高生长和高生根率无性系提供参考。结果表明:亚美马褂木扦插苗不定根形成有3种生根类型即皮部生根类型、中间生根类型和愈伤生根类型,其中愈伤生根类型扦插苗成活数量多,中间生根类型扦插苗生长最好,愈伤生根类型扦插苗生长较好。扦插苗鲜样质量与不定根数、不定根长、苗高和基径等相关系数达极显著正相关,苗高与不定根数和基径、不定根数与基径等相关系数达极显著正相关,不定根数与生根类型相关系数达极显著负相关。     

一株新疆灵芝的鉴定及生长和产糖性能初探

以新疆阿勒泰采集的灵芝子实体XJ-001为试材,采用组织分离纯化获得该菌纯培养,以菌丝体基因组DNA为模板进行ITS片段扩增,测序并进行系统发育分析;以5种不同培养基培养菌株,通过比较生长速度,选出适宜母种培养基;摇瓶发酵研究不同碳氮源对菌株菌丝体生物量、胞内及胞外多糖含量的影响。结果表明:根据形态特征结合rDNA-ITS分析,初步将XJ-001鉴定为Ganoderma lucidum,并获得GenBank登录号为KT997431;菌株在玉米粉、豆饼粉琼脂培养基长势最优,生长速度为18.7mm·d~(-1);以葡萄糖、酵母浸粉为最适碳、氮源,在转速150r·min~(-1),30℃培养5d,菌株XJ-001菌丝体生物量、胞内/外多糖含量分别为8.15、1.18、0.05mg·mL~(-1)。该菌株具有生长迅速和产糖较高的潜在性能,可为开发新疆野生灵芝资源提供参考。     

外源乙烯和1-甲基环丙烯处理对采后胡萝卜品质的影响

以胡萝卜为试材,采用乙烯及乙烯受体抑制剂(1-甲基环丙烯)处理,通过对贮藏60d后胡萝卜的品质劣变率(长须根率、腐烂指数、出薹率)、外观指数、可溶性糖含量及多酚氧化酶活性进行测定,研究了1-MCP对胡萝卜采后贮藏品质的影响。结果表明:1-MCP结合手洗贮藏可抑制胡萝卜贮藏期间的品质劣变率、抑制可溶性糖含量的损失、保持较高的外观指数及抑制多酚氧化酶(PPO)活性。手洗后贮藏则可有效改善胡萝卜贮藏期间的表皮褐变问题。     

甘蓝型油菜雌性不育突变体FS1花器官形态结构研究

植物界中雌性不育现象普遍存在，迄今已在小麦、水稻、苎麻、油松、桔柑等作物中发现了雌性不育突变体^[1~5]，并对雌性不育的机理、遗传、应用进行了研究^[6~11]。1996年我们在油菜育种圃甘蓝型黄籽油菜宁油10号株系中发现了3株异常株，每株只结几个角果，角果肥大且角粒数只有1~5个，后来研究证实为雌性不育突变体，定名为FS1。雌性不育系作父本与母本混播，应用于杂交油菜制种可缩小父、母本间传粉距离，增加母本播种量，从而提高制种产量和纯度。初步研究表明，FS1天然授粉、套袋自交、剥蕾自交结角率为3%左右，平均每角粒数为1.30-2.07粒，其雌性不育性可以遗传，花粉育性正常，体细胞染色体数正常，为2n=38，花粉母细胞减数分裂正常（有关研究另文报道）。为了解甘蓝型油菜雌性不育突变体FS1的雌性不育机制，本文从形态结构方面做了初步研究。     

A Research of Life Cycle Integrated Management Pattern of Construction Project

Development Management (DM) in decision phase, Project Management on behalf of the owner (OPM) in implementation phase and Facility Management (FM) in operation phase are three isolated management tools during traditional life cycle management of construction project. As a result, a lot of potential disadvantages are aroused. In recent years, many research organizations try to reform the traditional method using different integration means. This paper tries to explore into integration of DM, OPM and FM to overcome the malpractice of traditional life cycle management of construction project. The research focuses on three aspects: 1.putting forward the concept of Life Cycle Integrated Management (LCIM), based on management integration theory; 2. Raising a new idea to owner's (operator's) management organization design, which emphasizes on the balance of life cycle objectives; 3. Analyzing an information module, level and method of system integration of Life Cycle Integrated Management Information System.